Capillary electrophoresis has emerged as a powerful approach for carbohydrate analyses since 2014. The method provides high resolution capable of separating carbohydrates by charge-to-size ratio. Principle applications are heavily focused on N-glycans, which are highly relevant to biological therapeutics and biomarker research. Advances in techniques used for N-glycan structural identification include migration time indexing and exoglycosidase and lectin profiling, as well as mass spectrometry. Capillary electrophoresis methods have been developed that are capable of separating glycans with the same monosaccharide sequence but different positional isomers, as well as determining whether monosaccharides composing a glycan are alpha or beta linked. Significant applications of capillary electrophoresis to the analyses of N-glycans in biomarker discovery and biological therapeutics are emphasized with a brief discussion included on carbohydrate analyses of glycosaminoglycans and mono-, di-, and oligosaccharides relevant to food and plant products. Innovative, emerging techniques in the field are highlighted and the future direction of the technology is projected based on the significant contributions of capillary electrophoresis to glycoscience from 2014 to the present as discussed in this review.

Phospholipid nanogels enhance the stability and performance of the exoglycosidase enzyme neuraminidase and are used to create a fixed zone of enzyme within a capillary. With nanogels, there is no need to covalently immobilize the enzyme, as it is physically constrained. This enables rapid quantification of Michaelis–Menten constants (KM) for different substrates and ultimately provides a means to quantify the linkage (i.e., 2-3 versus 2-6) of sialic acids. The fixed zone of enzyme is inexpensive and easily positioned in the capillary to support electrophoresis mediated microanalysis using neuraminidase to analyze sialic acid linkages. To circumvent the limitations of diffusion during static incubation, the incubation period is reproducibly achieved by varying the number of forward and reverse passes the substrate makes through the stationary fixed zone using in-capillary electrophoretic mixing. A KM value of 3.3 ± 0.8 mM (Vmax, 2100 ± 200 μM/min) was obtained for 3′-sialyllactose labeled with 2-aminobenzoic acid using neuraminidase from Clostridium perfringens that cleaves sialic acid monomers with an α2-3,6,8,9 linkage, which is similar to values reported in the literature that required benchtop analyses. The enzyme cleaves the 2-3 linkage faster than the 2-6, and a KM of 2 ± 1 mM (Vmax, 400 ± 100 μM/min) was obtained for the 6′-sialyllactose substrate. An alternative neuraminidase selective for 2-3 sialic acid linkages generated a KM value of 3 ± 2 mM (Vmax, 900 ± 300 μM/min) for 3′-sialyllactose. With a knowledge of Vmax, the method was applied to a mixture of 2-3 and 2-6 sialyllactose as well as 2-3 and 2-6 sialylated triantennary glycan. Nanogel electrophoresis is an inexpensive, rapid, and simple alternative to current technologies used to distinguish the composition of 3′ and 6′ sialic acid linkages.

Widespread use of the chlorotriazine herbicide, atrazine, has led to serious environmental and human health consequences. Current methods of detecting atrazine contamination are neither rapid nor cost-effective. In this work, atrazine-specific single-stranded DNA (ssDNA) molecular recognition elements (MRE) were isolated. We utilized a stringent Systematic Evolution of Ligands by Exponential Enrichment (SELEX) methodology that placed the greatest emphasis on what the MRE should not bind to. After twelve rounds of SELEX, an atrazine-specific MRE with high affinity was obtained. The equilibrium dissociation constant (Kd) of the ssDNA sequence is 0.62 ± 0.21 nM. It also has significant selectivity for atrazine over atrazine metabolites and other pesticides found in environmentally similar locations and concentrations. Furthermore, we have detected environmentally relevant atrazine concentrations in river water using this MRE. The strong affinity and selectivity of the selected atrazine-specific ssDNA validated the stringent SELEX methodology and identified a MRE that will be useful for rapid atrazine detection in environmental samples.

This activity allows students to visualize the electrolysis of water in a microfluidic device in under 1 min. Instructional materials are provided to demonstrate how the activity meets West Virginia content standards and objectives. Electrolysis of water is a standard chemistry experiment, but the typical laboratory apparatus (e.g., Hoffman cell) is best suited for group presentations. With microfluidics, the cell volume is reduced from 100 mL to 100 μL, making the electrolysis safer and easier to view by an individual. A single device is reusable and assembled for $5. This report describes the development of a microfluidic learning module that was implemented and assessed in the eighth-grade chemistry classroom.

This review of capillary electrophoresis methods for DNA analyses covers critical advances from 2009 to 2014, referencing 184 citations. Separation mechanisms based on free-zone capillary electrophoresis, Ogston sieving, and reptation are described. Two prevalent gel matrices for gel-facilitated sieving, which are linear polyacrylamide and polydimethylacrylamide, are compared in terms of performance, cost, viscosity, and passivation of electroosmotic flow. The role of capillary electrophoresis in the discovery, design, and characterization of DNA aptamers for molecular recognition is discussed. Expanding and emerging techniques in the field are also highlighted.

CE separations of glycans taken from the cancer drug, Trastuzumab (Herceptin(®)), were accomplished using phospholipid additives. Glycans were labeled with 1-aminopyrene-3,6,8-trisulfonic acid and were separated with efficiencies as high as 510000 theoretical plates in a 60.2 cm 25 μm id fused-silica capillary. The thermally tunable phospholipid was loaded into the capillary when it possessed a viscosity similar to that of water. The temperature was increased, and the separations were performed when the material exhibited higher viscosity. Enzymes were integrated into the separation with the phospholipid additive. Neuraminidase, β1-4 galactosidase, and β-N-acetylglucosaminidase were injected into the capillary without covalent modification and used for enzyme hydrolysis. Exoglycosidase enzymes cleaved the terminal glycan residues. The glycan sequence could be verified based on enzyme specificity. Neuraminidase was used to determine total glycan content of the low-abundance glycans containing sialic acid. β1-4 Galactosidase and β-N-acetylglucosaminidase were used sequentially in-capillary, to determine the structure of the high-abundance glycans.

A thermally responsive nanogel is used to create stationary zones of enzyme and lectin in a separation capillary. Once patterned in the capillary, analyte is driven through the zone, where it is converted to a specific product if an enzyme is used or captured if a lectin is used. These stationary zones are easily expelled after the analysis and then re-patterned in the capillary. The nanogel is compatible with enzymes and lectins and improves the stability of galactosidase, enabling more cost-effective use of biological reagents that provide insight into glycan structure. A feature of using stationary zones is that the reaction time can be controlled by the length of the zone, the applied field controlling the analyte mobility, or the use of electrophoretic mixing by switching the polarity of the applied voltage while the analyte is located in the zone. The temperature, applied voltage, and length of the stationary zone, which are factors that enhance the performance of the enzyme, are characterized. The combined use of enzymes and lectins in capillary electrophoresis is a new strategy to advance rapid and automated analyses of glycans using nanoliter volumes of enzymes and lectins. The applicability of this use of stationary zones of enzyme and lectin in capillary electrophoresis is demonstrated with the identification of β(1-3)-linked galactose in N-glycan.

Sialylation and sialic acid linkage in N-glycans are markers of disease but are analytically challenging to quantify. A capillary electrophoresis method is reported that integrates a unique combination of enzymes and lectins to modify sialylated N-glycans in real time in the capillary so that N-glycan structures containing α2–6-linked sialic acid are easily separated, detected, and quantified. In this study, N-glycans were sequentially cleaved by enzymes at the head of the separation capillary so that the presence of α2–6-linked sialic acids corresponded to a shift in the analyte migration time in a manner that enabled interpretation of the N-glycan structure. Following injection, only afucosylated N-glycan structures were passed through enzyme zones that contained α2–3 sialidase, followed by β1–3,4 galactosidase, which cleaved any terminal α2–3-linked sialic acid and underlying galactose yielding a terminal N-acetyl glucosamine. With this treatment complete, a third zone of α2–3,6,8 sialidase converted the remaining α2–6-linked sialic acid to terminal galactose. With these enzyme processing steps the α2–6-linked sialic acid residues on an N-glycan correlated directly to the number of terminal galactose residues that remained. The number of terminal galactose residues could be interpreted as a stepwise decrease in the migration time. Complex N-glycans from α-1-acid glycoprotein were analyzed using this approach, revealing that a limited number of α2–6-linked sialic acids were present with biantennary, triantennary, and tetraantennary N-glycans of α-1-acid glycoprotein generally containing 0 or 1 α2–6-linked sialic acid.