Active food packaging is a dynamic area where the scientific community and industry have been trying to find new strategies to produce innovative packaging that is economically viable and compatible with conventional production processes. The materials used to develop active packaging can be organized into scavenging and emitting materials, and based on organic and inorganic materials. However, the incorporation of these materials in polymer-based flexible packaging is not always straightforward. The challenges to be faced are mainly related to active agents’ sensitivity to high temperatures or difficulties in dispersing them in the high viscosity polymer matrix. This review provides an overview of methodologies and processes used in the production of active packaging, particularly for the production of active flexible films at the industrial level. The direct incorporation of active agents in polymer films is presented, focusing on the processing conditions and their effect on the active agent, and final application of the packaging material. Moreover, the incorporation of active agents by coating technologies and supercritical impregnation are presented. Finally, the use of carriers to help the incorporation of active agents and several methodologies is discussed. This review aims to guide academic and industrial researchers in the development of active flexible packaging, namely in the selection of the materials, methodologies, and process conditions.

No abstract

The search for new forms to extend foodstuffs’ shelf-life through the use of natural compounds and extracts continues to grow among researchers and the industry. In this line of thought, the main objective of this work was to develop, characterize and evaluate the effectiveness of an active food packaging based on polylactic acid (PLA) and incorporated with natural extracts obtained from grape and/or pomegranate by-products. In vitro, antioxidant methods were applied to evaluate the antioxidant capacity of three extracts: wort extract, freeze-dried pomegranate peels extract (PPE-FD), and natural pomegranate peels (PPE-N). Punicalagin (A + B) and ellagic acid were determined in PPE-FD, PPE-N, and active films by UHPLC-DAD. New PLA-based active packaging with PPE-FD (PLA/3PPE) and pomegranate peels (PLA/3PP) were developed, and their chemical, mechanical, and barrier properties were evaluated. Moreover, the effectiveness of the new film was carried out through the study of lipid oxidation state and microbial contamination of two high-fat content foodstuffs, almonds and beef meat. PPE-FD presented high antioxidant capacity and high content in total phenolics and flavonoid compounds. The PLA/3PPE and PLA/3PP prevented the lipid oxidation of meat and presented antimicrobial activity against Staphylococcus aureus. The addition of the PPE-FD and the pomegranate peels to the PLA did not affect the morphology of the polymer. Although both PPE-FD and pomegranate peels presented punicalagin (A + B) and ellagic acid, only ellagic acid was identified and quantified in the active PLA. Active PLA films were not effective in delaying the lipid oxidation of almonds, but they showed to be significantly effective in delaying the lipid oxidation of beef meat and reducing the microbial growth in this food matrix over time.

This study focuses on the development of low-density polyethylene matrix nanocomposite films for food packaging industry and aims at improving low-density polyethylene oxygen barrier properties while maintaining other relevant characteristics, such as processability, easy post-processing, optical and mechanical properties. low-density polyethylene nanocomposites, with 1 and 2.5 wt.% nanoclay (NC) and also compatibilized with 5 wt.% polyethylene grafted with maleic anhydride (PE-g-MA), were prepared and used to produce blown films. The nanocomposites were characterized in terms of their morphology, thermal, rheological, mechanical, barrier and optical properties, through scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), rheological measurements, tensile tests, water vapor transmission, oxygen permeability tests and spectrophotometry. The results demonstrated good NC dispersion in the polymer matrix and decreased oxygen permeability in the compatibilized nanocomposite films. All the other properties did not significantly change when compared to neat low-density polyethylene. Overall, the film properties were improved with the added nanoclay and PE-g-MA and, have potential for food packaging.