This publication presents the experimental and numerical methods to model the devolatilization process of a glass‐fibre‐reinforced polyester/balsa‐cored sandwich material on small scale. The fundamental modelling of the source term in pyrolysis‐based fire simulations requires as input data the thermochemical properties of solid fuel and the kinetic parameters of the devolatilization process. First, the thermal decomposition of both elements composing the sandwich structure was studied by thermogravimetry coupled with gas analysis, in air and pure nitrogen atmospheres at several heating rates, in order to define a comprehensive multi‐step reaction pathway. A differential equation system is defined to model these decomposition processes. The kinetic parameters were then estimated by solving the system of equations by an inverse problem. Second, the fire behaviour of each element was studied separately and then combined in the sandwich structure on the cone calorimeter. In addition, numerical simulations with Fire Dynamics Simulator were performed to gradually assess the ability of the model(s) to reproduce each element composing the sandwich structure. Numerical and experimental results are compared and then discussed. Overall, the model provides a good agreement with the experimental data and encourages to model higher scales. Copyright © 2012 John Wiley & Sons, Ltd.

Nanoclay-based nanocomposites have been widely studied and produced since the late 1990s, and frequently end up in waste disposal plants. This work investigates the behavior of PA6/HNTs nanocomposites (nylon-6 incorporating halloysite nanotubes) during incineration. Incineration tests were performed at lab-scale using a specific tubular furnace modified in order to control the key incineration parameters within both the combustion and postcombustion zones. The combustion residues and combustion aerosol (particulate matter and gas phase) collected downstream of the incinerator furnace were characterized using various aerosol analysis techniques. Time tracking of the gas and particle-number concentrations revealed two-step char formation during combustion. HNTs transformed into other mineral structures which were found in both the aerosol and the residues. During combustion of the polymer, it appears that HNTs contribute to the formation of a cohesive char layer that protects the residual material.

No abstract

Carbon nanotube-based poly(methyl methacrylate) and polyamide-6 nanocomposites have been investigated using various techniques within the framework of the NANOFEU project. Scanning transmission electron microscopy was used to characterize morphologies of composites, while fire properties were studied using cone calorimeter and pyrolysis combustion flow microcalorimeter. The study focused particularly on composition and microstructure of gaseous and aerosol products. Morphology of ultrafine particles released from the combustion of nanocomposites was studied using cascade impactor and atomic force microscopy. Fire behaviour has been interpreted in relation with the degradation mechanisms specifically induced by the presence of carbon nanotubes.

No abstract