No abstract

/npsi/ctrl?lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?lang=fr Access and use of this website and the material on it are subject to the Terms and Conditions set forth at http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://dx.doi.org/10.1016/S0017-9310(00)00227-1International Journal of Heat and Mass Transfer, 44, 9, pp. 1803-1815, 2001 AbstractA numerical model has been developed to simulate volatile organic compound (VOC) emissions from "wet" coating materials. The model considers the VOC mass transfer process in the air and material-air interface, and diffusion in the material film and also in the substrate. Our numerical simulations confirmed that the emissions from "wet" materials applied to an absorptive substrate are dominated by evaporation at the beginning followed by internal diffusion, which had been hypothesized based on previous experimental data. The numerical model has been validated based on the data from small-scale environmental chamber tests.

/npsi/ctrl?lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?lang=fr Access and use of this website and the material on it are subject to the Terms and Conditions set forth at http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://dx.doi.org/10.1016/S1352-2310(00) Atmospheric Environment, 35, 7, pp. 1291Environment, 35, 7, pp. -1299Environment, 35, 7, pp. , 2001 A version of this paper is published in / Une version de ce document se trouve dans :Atmospheric Environment, v. 35, no. 7, 2001Environment, v. 35, no. 7, , pp. 1291Environment, v. 35, no. 7, -1299 www.nrc.ca/irc/ircpubs Abstract -The sorption of VOCs by different building materials can significantly affect VOC concentrations in indoor environments. In this paper, a new model has been developed for simulating VOC sorption and desorption rates of homogeneous building materials with constant diffusion coefficients and material-air partition coefficients.The model analytically solves the VOC sorption rate at the material-air interface. It can be used as a "wall function"in combination with more complex gas-phase models that account for non-uniform mixing to predict sorption process. It can also be used in conjunction with broader indoor air quality studies to simulate VOC exposure in buildings.Key word index: Numerical model, indoor air quality, diffusion coefficient, partition coefficient, environmental chamber, gypsum board. T 0 reference temperature [K]

/npsi/ctrl?lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?lang=fr Access and use of this website and the material on it are subject to the Terms and Conditions set forth at http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur.HVAC&R Research : International Journal of Heating, Ventilating, AirConditioning and Refrigerating Research, 5, 4, pp. 297-316, 1999-10-01 Measurements of VOC adsorption/desorption characteristics of typical interior building materials An, Y.; Zhang, J. S.; Shaw, C. Y. The material in this document is covered by the provisions of the Copyright Act, by Canadian laws, policies, regulations and international agreements. Such provisions serve to identify the information source and, in specific instances, to prohibit reproduction of materials without written permission. For more information visit http://laws.justice.gc.ca/en/showtdm/cs/C-42Les renseignements dans ce document sont protégés par la Loi sur le droit d'auteur, par les lois, les politiques et les règlements du Canada et des accords internationaux. Ces dispositions permettent d'identifier la source de l'information et, dans certains cas, d'interdire la copie de documents sans permission écrite.

/npsi/ctrl?lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?lang=fr Access and use of this website and the material on it are subject to the Terms and Conditions set forth at http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://dx.doi.org/10.1016/S1352-2310(01)00223-0 Atmospheric Environment, 35, pp. 4479-4488, 2001-04-03 Validation of VALIDATION OF THE SURFACE SINK MODEL FOR SORPTIVE INTERACTIONS BETWEEN VOCS AND INDOOR MATERIALS AbstractAdsorption and desorption by indoor surface materials can have significant impacts on the level of volatile organic compounds (VOCs) indoors. The surface sink model (SSM) was developed to account for these interactions in an indoor air quality model. Two types of scale-up experiments were conducted to validate the SSM that was developed based on small-scale chamber experiments. Conflicting results were obtained from a large-scale laboratory experiment and a field test. From the large-scale laboratory experiment involving three materials and three chemicals, relatively good agreement was observed between measurements and predictions by the SSM. In contrast, the level of sorption in the field test was observed to be at least 9 times greater than was predicted by the SSM.

No abstract

In this paper, numerical simulations have been conducted to study the effects of key environmental and test conditions (air velocity, temperature, film thickness, and sample application time) on volatile organic compound (VOC) emissions from a "wet" coating material (wood stain). Simulation results indicate that air velocity and sample application time only significantly affect the emission profiles in the early stage. Film thickness, on the other hand, affects long-term emissions. Temperature can affect both the short-term and long-term emissions.

No abstract