No abstract

In this paper, the idea of using a convolutional neural network (CNN) for the detection and classification of induction motor stator winding faults is presented. The diagnosis inference of the stator inter-turn short-circuits is based on raw stator current data. It offers the possibility of using the diagnostic signal direct processing, which could replace well known analytical methods. Tests were carried out for various levels of stator failures. In order to assess the sensitivity of the applied CNN-based detector to motor operating conditions, the tests were carried out for variable load torques and for different values of supply voltage frequency. Experimental tests were conducted on a specially designed setup with the 3 kW induction motor of special construction, which allowed for the physical modelling of inter-turn short-circuits in each of the three phases of the machine. The on-line tests prove the possibility of using CNN in the real-time diagnostic system with the high accuracy of incipient stator winding fault detection and classification. The impact of the developed CNN structure and training method parameters on the fault diagnosis accuracy has also been tested.

No abstract

Electrical winding faults, namely stator short-circuits and rotor bar damage, in total constitute around 50% of all faults of induction motors (IMs) applied in variable speed drives (VSD). In particular, the short circuits of stator windings are recognized as one of the most difficult failures to detect because their detection makes sense only at the initial stage of the damage. Well-known symptoms of stator and rotor winding failures can be visible in the stator current spectra; however, the detection and classification of motor windings faults usually require the knowledge of human experts. Nowadays, artificial intelligence methods are also used in fault recognition. This paper presents the results of experimental research on the application of the stator current symptoms of the converter-fed induction motor drive to electrical fault detection and classification using Kohonen neural networks. The experimental tests of a diagnostic setup based on a virtual measurement and data pre-processing system, designed in LabView, are described. It has been shown that the developed neural detectors and classifiers based on self-organizing Kohonen maps, trained with the instantaneous symmetrical components of the stator current spectra (ISCA), enable automatic distinguishing between the stator and rotor winding faults for supplying various voltage frequencies and load torque values.