RESUMONeste trabalho foi realizada a caracterização mecânica e microestrutural de um aço microligado com estrutura multifásica. Foi aplicado tratamento térmico pré-determinado, objetivando a formação de uma microestrutura multifásica no material. Na caracterização microestrutural foram utilizados ataques químicos à base de metabissulfito de sódio e ácido pícrico, enquanto a caracterização mecânica foi realizada através de ensaios de tração. Os resultados demonstram o elevado potencial dos aços multifásicos em aplicações que necessitem de valores superiores de resistência e ductilidade, pois tanto para temperatura isotérmica de 400ºC quanto para 350ºC houve um ganho no limite de resistência à tração ficando em torno de 786MPa e 773MPa respectivamente, representando um aumento de 15,5% e 13,6% com relação ao material fornecido. Palavras chaves:Reagente Le Pera, aços multifásicos, caracterização mecânica, caracterização microestrutural. Mechanical and microstructural characterization of a multiphase microalloyed steel ABSTRACTA mechanical and microstructural characterization of a multiphase micro alloyed steel was realized in this work. A predetermined heat treatment was realized in order to nucleate a multiphase microstructure in the material. In the microstuctural characterization sodium metabisulfite and picric acid echants were applied, while the mechanical characterization was realized by tensile tests. The results showed a high potential of multiphase steel in applications that needs greater values of strength and ductility, because for both isothermal temperature of 400 ° C to 350 ° C as there was a gain in the limit of tensile strength getting around 786MPa and 773MPa respectively, representing an increase of 15.5% and 13.6% with respect to material provided.Keywords: Le Pera etchant, multiphase steels, mechanical characterization, microstructural characterization. INTRODUÇÃOA necessidade do desenvolvimento de aços com alta resistência e boa conformabilidade resultou no surgimento dos aços multifásicos, formados de ferrita, bainita, austenita retida e martensita. A quantidade de austenita retida nesses aços é que proporciona sua alta resistência e ductilidade, levando-se também em consideração o teor dos elementos de liga, sendo os principais o carbono, manganês e silício [1]. Nesses aços tenta-se conseguir uma maior eficiência do efeito TRIP através da estabilização da austenita retida para que esta se transforme em níveis mais elevados de tensão e deformação.Os aços multifásicos são obtidos através de uma austenização parcial ou total, seguida de um tratamento isotérmico na faixa de temperatura de transformação bainítica. Durante o tratamento isotérmico, parte da austenita é transformada em bainita, enquanto outra parcela da austenita residual se transforma em martensita, durante a têmpera em água [2]. A ductilidade à temperatura ambiente depende do tempo de
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.