Zn-containing dense monodispersed bioactive glass nanoparticles (Zn-BAGNPs) have been developed to deliver therapeutic inorganic trace elements, including Si, Ca, Sr, and Zn, to the cells through the degradation process, as delivery carriers for stimulating bone regeneration because of their capacity to induce osteogenic differentiation. The sol–gel-derived dense silica nanoparticles (SiO2-NPs) were first synthesized using the modified Stöber method, prior to incorporating therapeutic cations through the heat treatment process. The successfully synthesized monodispersed Zn-BAGNPs (diameter of 130 ± 20 nm) were homogeneous in size with spherical morphology. Ca, Sr and Zn were incorporated through the two-step post-functionalization process, with the nominal ZnO ratio between 0 and 2 (0, 0.5, 1.0, 1.5 and 2.0). Zn-BAGNPs have the capacity for continuous degradation and simultaneous ion release in SBF and PBS solutions due to their amorphous structure. Zn-BAGNPs have no in vitro cytotoxicity on the murine pre-osteoblast cell (MC3T3-E1) and periodontal ligament stem cells (PDLSCs), up to a concentration of 250 µg/mL. Zn-BAGNPs also stimulated osteogenic differentiation on PDLSCs treated with particles, after 2 and 3 weeks in culture. Zn-BAGNPs were not toxic to the cells and have the potential to stimulate osteogenic differentiation on PDLSCs. Therefore, Zn-BAGNPs are potential vehicles for therapeutic cation delivery for applications in bone and dental regenerations.
This study aimed to examine the retentive characteristics of each retentive element material and the effects from thermocycling using the two implant-retained mandibular overdenture model. Two stud abutments and three retentive element materials; nylon, polyetheretherketone (PEEK) and polyvinylsiloxane (PVS) were used in this study. Four tested groups, with a total of 40 overdentures, were fabricated, including a Locator® abutment with nylon retention insert (NY), Novaloc® abutment with PEEK retention insert (PK), Locator® abutment with PVS retention insert (RL), and Novaloc® abutment with PVS retention insert (RN). The retentive force (N) was measured before thermocycling, and at 2500, 5000, and 10,000 cycles after thermocycling. Significant changes in the percentage of retention loss were found in the NY and PK groups (p < 0.05) at 6 and 12 months for the RL group (p < 0.05) after artificial aging. The RN group exhibited a constant retentive force (p > 0.05). The tendency of the percentage of retention loss significantly increased for PEEK, nylon, and PVS silicone over time. The results of the present study implied that retentive element materials tend to lose their retentive capability as a result of thermal undulation and water dispersion. Nylon and PEEK, comprising strong polar groups in polymer chains, showed a higher rate of retention loss than polyvinylsiloxane.
Purpose Aggressive implant macrothread designs have been widely used. However, the effects of the aggressive thread design on the accuracy of static guided surgery, especially in a case of narrow residual ridge, have not been well‐studied. The aim of this study was to evaluate the effects of two different implant macrothread designs and the residual ridge widths on the accuracy of tooth‐supported static guided implant surgery. Materials and methods Forty implant fixtures with two different macrodesigns: a conventional thread design bone level tapered (BLT), and an aggressive thread design bone level tapered (BLX) were placed in 40 simulated polyurethane models with narrow and wide residual ridges. The placed implant positions were compared with the planned implant position and angulational deviation, as well as three‐dimensional (3D) deviations at the entry and apex of the implant were measured. One‐way ANOVA with Tukey's multiple comparisons (ɑ = 0.05) were used to determine level of significance between the mean and variance deviation values. 95% confidence intervals and box plots were used to demonstrate the means and ranges of precision. Results In terms of angulational deviation, there was no statistically significant difference in the mean deviations for both types of implants, p = 1.55 and p = 0.84 for wide and narrow ridge groups, respectively. However, the range of deviation was much larger in the narrow ridge of the BLX group compared to the BLT group. In both narrow ridge and wide ridge, the BLX group had lower mean 3D deviation values at both the entry and the apex with statistically significant differences for both entry point of the wide ridge (p = 0.027) and narrow ridge (p = 0.022) as well as at the apex of the wide ridge (p = 0.006) but not the apex of the narrow ridge (p = 0.142). Conclusion The aggressive larger thread design of dental implants may influence the accuracy of implant placement more than the ridge dimension.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.