The aim of this work was to investigate associations between individual cow Mycobacterium avium ssp. paratuberculosis (MAP) seropositivity, 305-d corrected milk production, and somatic cell count during 5 lactations lifespan in Portuguese dairy herds using multilevel mixed models. We used MAP serum ELISA (Idexx MAP Ac, Idexx Laboratories Inc., Westbrook, ME) results (n = 23,960) from all the 20,221 adult cows present in 329 farms and corresponding 47,586 lactation records from the National Dairy Improvement Association. Cows and farms were classified as positive or negative. Multilevel mixed models were used to investigate the association of cow MAP status with variation in milk production and somatic cell count. Cow MAP status, farm status, and lactation number were considered as independent variables. A quadratic function of lactation number was used to mimic the effect of lactation order on milk production. The models considered 3 levels: measurement occasion (level 1) within cow (level 2) and cow within farm (level 3). Four final models were produced, including all herds and cows, to address the effect of farm status (models 1 and 2) or the effect of cow status (models 3 and 4) on the outcome variables. Our results show that MAP status affects milk production. Losses are detectable from third lactation onward. During the first 5 lactations, positive cows accumulated an average loss of 1,284.8 kg of milk when compared with the negative cows. We also observed that somatic cell counts were higher in positive cows and a positive interaction occurs between cow status and lactation number, suggesting a positive association between MAP infection and increased somatic cell counts. Our results are in line with previous studies, suggesting a possible positive relation between cow milk production and susceptibility to MAP infection.
The use of Ta/TaN barrier bilayer systems in electronic applications has been ubiquitous over the last decade. Alternative materials such as Co-W or Ru-W alloys have gathered interest as possible replacements due to their conjugation of favourable electrical properties and barrier layer efficiency at reduced thicknesses while enabling seedless Cu electroplating. The microstructure, morphology, and electrical properties of Cu films directly electrodeposited onto Co-W or Ru-W are important to assess, concomitant with their ability to withstand the electroplating baths/conditions. This work investigates the effects of the current application method and pH value of the electroplating solution on the electrocrystallisation behaviour of Cu deposited onto a Co-W barrier layer. The film structure, morphology, and chemical composition were studied by X-ray diffraction, scanning electron microscopy and atomic force microscopy, as well as photoelectron spectroscopy. The results show that the electrolyte solution at pH 1.8 is incapable of creating a compact Cu film over the Co-W layer in either pulsed or direct-current modes. At higher pH, a continuous film is formed. A mechanism is proposed for the nucleation and growth of Cu on Co-W, where a balance between Cu nucleation, growth, and preferential Co dissolution dictates the substrate area coverage and compactness of the electrodeposited films.
For decades, Ta/TaN has been the industry standard for a diffusion barrier against Cu in interconnect metallisation. The continuous miniaturisation of transistors and interconnects into the nanoscale are pushing conventional materials to their physical limits and creating the need to replace them. Binary metallic systems, such as Ru-W, have attracted considerable attention as possible replacements due to a combination of electrical and diffusion barrier properties and the capability of direct Cu electroplating. The process of Cu electrodeposition on Ru-W is of fundamental importance in order to create thin, continuous, and adherent films for advanced interconnect metallisation. This work investigates the effects of the current density and application method on the electro-crystallisation behaviour of Cu. The film structure, morphology, and chemical composition were assessed by digital microscopy, atomic force microscopy, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The results show that it was possible to form a thin Cu film on Ru-W with interfacial continuity for current densities higher than 5 mA·cm−2; however, the substrate regions around large Cu particles remained uncovered. Pulse-reverse current application appears to be more beneficial than direct current as it decreased the average Cu particle size.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.