The designer's preoccupation to reduce the energy needs and get a better thermal quality of ambiances helped in the development of several packages simulating the dynamic behaviour of buildings. This paper shows the adaptation of a method of thermal analysis, the nodal analysis, linked to the case of building's thermal behaviour. We take successively an interest in the case of conduction into a wall, in the coupling with superficial exchanges and finally in the constitution of thermal state models of the building. Big variations existing from one building to another, it's necessary to build the thermal model from the building description. This article shows the chosen method in the case of our thermal simulation program for buildings, CODYRUN.

No abstract

No abstract

International audienceIn this paper, a Fault Tolerant Control Strategy (FTCS) dedicated to PEMFC (Polymer Electrolyte Membrane Fuel Cell) water management is implemented and validated online on a real PEMFC system. Thanks to coupling a Fault Detection and Isolation (FDI), an adjustable controller and a reconfiguration mechanism, FTCS allows addressing the important challenge of Fuel Cell (FC) reliability improvement. Only few works have already been conducted on FTCS applied to FC actuators faults, and none of them on FC water management faults. In this work, a neural-based diagnosis tool is computed online as FDI component and is coupled to a self-tuning PID controller. This diagnosis tool shows low computational time and high detection performance. The self-tuning PID controller shows robustness against noise measurements and model uncertainties. Its low computational cost makes it a suitable control method for real-time FTCS. Performed on a PEMFC system, the FTCS shows promising results on fault diagnosis and performance recovery

International audienceDiagnosis tool for water management is relevant to improve the reliability and lifetime of polymer electrolyte membrane fuel cells (PEMFCs). This paper presents a novel signal-based diagnosis approach, based on Empirical Mode Decomposition (EMD), dedicated to PEMFCs. EMD is an empirical, intuitive, direct and adaptive signal processing method, without pre-determined basis functions. The proposed diagnosis approach relies on the decomposition of FC output voltage to detect and isolate flooding and drying faults. The low computational cost of EMD, the reduced number of required measurements, and the high diagnosis accuracy of flooding and drying faults diagnosis make this approach a promising online diagnosis tool for PEMFC degraded modes management

No abstract

No abstract

No abstract