ABSTRACT:The main objective of this work has been to study the effects of copolymer microstructure, both chemical and physical, on the microporosity, in vitro hydrolytic degradability and biocompatibility of electrospun poly(L-lactide-co-e-caprolactone), PLC, copolymer tubes for potential use as absorbable nerve guides. PLC copolymers with L : C compositions of 50 : 50 and 67 : 33 mol % were synthesized via the ring-opening copolymerization of L-lactide (L) and e-caprolactone (C) at 120 C for 72 h using stannous octoate (tin(II) 2-ethylhexanoate) and n-hexanol as the initiating system. Electrospinning was carried out from solution in a dichloromethane/dimethylformamide (7 : 3 v/v) mixed solvent at room temperature. The in vitro hydrolytic degradation of the electrospun PLC tubes was studied in phosphate buffer saline over a period of 36 weeks. The microporous tubes were found to be gradually degradable by a simple hydrolysis mechanism leading to random chain scission. At the end of the degradation period, the % weight retentions of the PLC 50 : 50 and 67 : 33 tubes were 15.6% and 70.2%, respectively. Pore stability during storage as well as cell attachment and proliferation of mouse fibroblast cells (L929) showed the greater potential of the PLC 67 : 33 tubes for use as temporary scaffolds in reconstructive nerve surgery.
In this study, for the first time, a biodegradable poly(L-lactide-co-ε-caprolactone), PLC 67:33 copolymer was developed for use as temporary scaffolds in reconstructive nerve surgery. The effect of the surface topology and pore architecture were studied on the biocompatibility for supporting the growth of human umbilical cord Wharton's jelly-derived mesenchymal stem cells (hWJ-MSCs) and human neuroblastoma cells (hNBCs) as cell models. Porous PLC membranes were prepared by electrospinning and phase immersion precipitation with particulate leaching and nonporous PLC membranes were prepared by solvent casting. From the results, the porous PLC membranes can support hWJ-MSCs and hNBCs cells better than the nonporous PLC membrane, and the interconnected pore scaffold prepared by electrospinning exhibited a more significant supporting attachment of the cells than the open pore and nonporous membranes. We can consider that these electrospun PLC membranes with 3-D interconnecting fiber networks and a high porosity warrant a potential use as nerve guides in reconstructive nerve surgery.
Blending poly[(l‐lactide)‐co‐(ε‐caprolactone)] with 2.0% (w/w) collagen significantly changes electrospun fibre morphology, which assists in improving the initial attachment and health of olfactory ensheathing cells.
Sesamin, a significant lignin compound isolated from sesame (
Sesamum indicum Linn
), is well known for its antioxidant, anti-inflammatory, and tissue growth promotion properties. Bioabsorbable poly(ε-caprolactone) (PCL) is also a well-known polymer applied to various fields of medicine as biomaterials. The main objective of this research was to produce a prototype material from PCL and sesamin by electrospinning technique for bone tissue engineering applications. Dichloromethane and dimethylformamide (7:3) mixture was used as the solvent system for fabrication of PCL nanofiber with different loads of sesamin concentrations (1–6 wt%). The crystallinity levels decreasing and the entrapment efficiency increasing (86.87%–93.97%) were observed while sesamin concentrations were increased. The infrared spectra of electrospun mats confirmed that sesamin corporated into fibrous networks. The sesamin-loaded PCL nanofibrous membranes showed a significant release of sesamin in the range of 1.28–8.16 μg/mL within 10 weeks. The release data were fitted to zero order, first order, Higuchi and Korsmeyer-Peppas models to evaluate sesamin-releasing mechanisms and kinetics. The releasing kinetics of sesamin followed the Fickian diffusion mechanism of Korsmeyer-Peppas (R
2
= 0.99).
In vitro
experiments with an osteosarcoma cell line (MG-63) revealed cell attachment, biocompatibility, and promotion of bone marker expression, the alkaline phosphatase (ALP) activity were studied. The electrospun PCL nanofiber loaded with sesamin had the potential as a scaffold for sesamin delivery to bone cells and applications in biomedicine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.