To scale-up microbial fuel cells (MFCs), installing multiple unit cells in a common reactor has been proposed; however, there has been a serious potential drop when connecting unit cells in series. To determine the source of the loss, a basic stack-MFC (BS-MFC) has been devised, and the results show that the phenomenon is due to ions on the anode electrode traveling through the electrolyte to be reduced at the cathode connected in series. As calculated by means of the percentage potential drop, the degree of potential drop decreased with an increase in the unit-cell distance. When the distance was increased from 1 to 8 cm, the percentage potential drop in BS-MFC1 decreased from 46.76 ± 0.90 to 45.08 ± 0.70 % and in BS-MFC2 from 46.41 ± 0.95 to 43.82 ± 2.23 %. As the p-value of the t-test was lower than 0.05, the difference was considered significant; however, if the unit cells are installed far enough from each other to avoid the potential drop phenomenon, the system will be less dense, consequently reducing the ratio of electrode area per volume of anode compartment and decreasing the power density of the system. Finally, this study suggests design criteria for scaling-up MFC systems: Multiple-electrode-installed MFCs are modularized, and the unit cells are connected in series across the module (connecting each unit cell does not share the anolyte).
The power overshoot generated by electron depletion in microbial fuel cells (MFCs) was characterized in this study. Various causes of power overshoot, identified in previous studies, are discussed in terms of their plausible contributions to electron depletion. We found that power overshoot occurred if the anodic overpotential generated by electron depletion exceeded the cathodic overpotential. The introduction of assistance current from anode connections, which ameliorated the electron depletion in the MFCs, immediately eliminated the power overshoot. As a result, if the electron production at the anode exceeded electron reduction at the cathode, a power overshoot was not generated. The results revealed that introducing assistance current supplied from an additional anode to the limited anode eliminated power overshoot. The power overshoot is not generated by kinetic limitation at the cathode; it is only generated by the kinetic limitation at the anode. The mechanism underlying power overshoot should be considered in the design of MFCs to improve reliability, particularly in scaled-up plant applications. The proposed technique is more practical than previously proposed methods.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.