Energy consumption has risen to be a bottleneck in wireless sensor networks. This is caused by the challenges faced by these networks due to their tiny sensor nodes that have limited memory storage, small battery capacity, limited processing capability, and bandwidth. Data compression has been used to reduce energy consumption and improve network lifetime, as it reduces data size before it can be forwarded from the sensing node to the sink node in the network. In this paper, a survey and comparison of currently available data compression techniques in wireless sensor networks are conducted. Suitable sets of criteria are defined to classify existing data compression algorithms. An adaptive lossless data compression algorithm (ALDC) is analyzed through MATLAB coding and simulation from the reviewed data compression techniques. The analysis aims to discover strategies that can be used to reduce the amount of data further before it is transmitted. From this analysis, it was discovered that encoding residue samples, rather than raw data samples, reduced the bitstream from 112 bits to a range of 30 to 36 bits depending on the sample block sizes. The average length of data samples to be passed to the encoder was minimized from the original 14 bits per symbol to 1.125 bits per symbol. This demonstrated a 0.875 code efficiency or redundancy. It resulted in an energy saving of 67.8% to 73.2%. This work further proposes a data compression algorithm that encodes the residue samples with fewer bits than the ALDC algorithm. The algorithm reduced the bitstream to 26 bits. The average length of the code is equal to the entropy of the data samples, demonstrating zero redundancy and an improved energy saving of 76.8% compared to ALDC. The proposed algorithm, therefore, shows improved energy efficiency through data compression.

The assimilation of Distributed Generation (DG) into the electric power system (EPS) has become more attractive as the world is following a trend to reduce greenhouse gas emissions by introducing more renewable energy forms resulting in high penetration scenarios. This high penetration of DGs brings several challenges to the protection philosophy of the EPS which compromises its reliability, availability, and efficiency. Under high DG penetration scenarios, conventional islanding detection methods (Idms) fail to detect an island as the grid loses its inertia to leverage a significant frequency and voltage mismatch necessary for Idms to effectively detect an islanding event. This has given rise to the birth of Artificial Intelligent (AI) methods that are found to perform better in islanding detection. AI Idms are computationally intensive and require a lot of data to operate accurately. Because the computational burden of these methods requires fast computing hardware, the current trend of AI Idms are integrated with Wide Area Monitoring, Protection, and Control (WAMPAC) system. This paper aims at reviewing all these Idms and the WAMPAC’s system latency when hosting AI Idms which are currently the best in islanding detection. This is done to determine if the WAMPAC system latency plus Idms computational time meet the islanding detection time specified by the IEEE Standard 1547 framework.

Sensor-based sorting has had a wide range of industrial use in automating and speeding up the process which requires substances or objects to be segregated from each other. The high demand for goods including raw materials, food, minerals, and waste recycling has increased the pressure for high-speed sorting. The first part of this paper presents a comprehensive theoretical and practical survey and comparison of current sorting methods relying on the use of the electromagnetic spectrum. Sorting methods are classified among other things, which portion of the EM spectrum is it, background noise rejection capacity, sample size limitations, sample chemistry limitations, sample surface cleanliness, spatial resolution capacity, spectral resolution, and feed rate limitations. The analysis focuses on color or visible light sorting, gamma-ray sorting, infra-red sorting, x-ray transmission-based sorting and x-ray fluorescence sorting, coupling the findings to the classification criteria outlined. We see a need to define a universal sorting scheme that will in general be applied to most sorting tasks. To do this, the final part of this paper re-looks at the x-ray transmission and x-ray fluorescence sorting scheme in line with the established limitations and proposes a dual x-ray transmission and fluorescence method to mitigate the challenge affecting the different schemes.

Recent surveys in the energy harvesting system for seismic nodes show that, most often, a single energy source energizes the seismic system and fails most frequently. The major concern is the limited lifecycle of battery and high routine cost. Simplicity and inexperience have caused intermittent undersizing or oversizing of the system. Optimizing solar cell constraints is required. The hybridization of the lead-acid battery and supercapacitor enables the stress on the battery to lessen and increases the lifetime. An artificial neural network model is implemented to resolve the rapid input variations across the photovoltaic module. The best performance was attained at the epoch of 117 and the mean square error of 1.1176e-6 with regression values of training, test, and validation at 0.99647, 0.99724, and 0.99534, respectively. The paper presents simulations of Nsukka seismic node as a case study and to deepen the understanding of the system. The significant contributions of the study are (1) identification of the considerations of the PV system at a typical remote seismic node through energy transducer and storage modelling, (2) optimal sizing of PV module and lead-acid battery, and, lastly, (3) hybridization of the energy storage systems (the battery and supercapacitor) to enable the energy harvesting system to maximize the available ambient irradiance. The results show the neural network model delivered efficient power with duty cycles across the converter and relatively less complexities, while the supercapacitor complemented the lead-acid battery and delivered an overall efficiency of about 75 % .

No abstract

No abstract

No abstract

No abstract