Turbulence-induced refraction effects to lower hybrid (LH) wave propagation and current drive are studied using synthetic scrape-off layer (SOL) blob/filament fields. A synthetic 3D, field-following, blob turbulence model is implemented in the ray-tracing/Fokker-Planck (RTFP) codes GENRAY/CQL3D. In Alcator C-Mod, the blob field is shown to significantly affect LH ray-trajectories, leading to increased on-axis damping and smoother current profiles. This effect depends on the average blob size and amplitude. In addition, the diffusion of ray-trajectories in phase-space caused by turbulence increases the robustness of the RTFP model. A modified N | | launch spectrum, acting as a proxy for parametric decay instability (PDI) effects, is included in simulations with the blob model. A synergy between the modified launch spectrum and turbulence-induced refraction results in synthetic hard x-ray profiles that agree with experiment. Lastly, the blob model is used to predict the effect of SOL turbulence on DIII-D high-field side (HFS) LH launch. Assuming low turbulence amplitude in the HFS SOL (∼5%), turbulence-induced refraction is predicted to have little effect on current drive efficiency.

The interaction of radio-frequency (RF) waves with edge turbulence modifies the incident wave spectrum, and can significantly affect RF heating and current drive in tokamaks. Previous lower hybrid (LH) scattering models have either used the weak-turbulence approximation, or treated more realistic, filamentary turbulence in the ray tracing limit. In this work, a new model is introduced which retains full-wave effects of RF scattering in filamentary turbulence. First, a Mie-scattering technique models the interaction of an incident wave with a single Gaussian filament. Next, an effective differential scattering width is derived for a statistical ensemble of filaments. Lastly, a Markov chain solves for the transmitted wave spectrum in slab geometry. This model is applied to LH launching for current drive. The resulting wave spectrum is asymmetrically broadened in angular wavenumber space. This asymmetry is not accounted for in previous LH scattering models. The modified wave spectrum is coupled to a ray tracing/Fokker–Planck solver (GENRAY/CQL3D) to study its impact on current drive. The resulting current profile is greatly altered, and there is significant increase in the on-axis current and decrease in the off-axis peaks. This is attributed to a portion of the modified wave spectrum that is strongly dampened on-axis during the first pass.

DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L–H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.

Lower hybrid current drive (LHCD) is beneficial for developing a steady-state operation scenario in a tokamak. This paper conducts a modeling investigation to identify an optimum rotation angle of the initial lower hybrid perpendicular (to the background magnetic field B) wavevector for best matching the experimental RF current profile. It is hypothesized that central RF power deposition widely observed in the present-day LHCD experiments arises from wave scattering by turbulence. In a standard model without considering such interactions, the predicted power deposition profile is generally broad with off-axis peaking, not in agreement with experimental observations. A heuristic approach is adopted by introducing a spectral broadening mechanism by modifying the initial orientation of the perpendicular wavevector. The ray-tracing/Fokker-Planck solver GENRAY/CQL3D is utilized within the python-based π-scope framework. A focus is given to identify the perpendicular wavenumber orientation angle with respect to the magnetic surface normal vector at the initial ray location. Our modeling study shows that rotating the perpendicular wavevector in such a way as to increase the initial poloidal component is effective in reproducing the centrally peaked current profile observed in normal shear plasmas on both EAST and C-Mod. These waves can readily be absorbed to the central plasma, which reduces the sensitivity of the power deposition profile to a slight change of the plasma condition. The same approach is also found to help broaden the off-axis power deposition profile in a reverse-shear EAST plasma, leading to a better agreement with the experiment. The results presented here suggest that spectral modification arising from edge density fluctuations in a tokamak may need to be considered in understanding wave propagation and absorption. A further experimental and theoretical/modeling study is vital as a reverse approach is adopted in this study. Our work suggests that mitigation or control measures are critical for parasitic effects occurring on the first pass in a reactor regime.

No abstract