Innovations of concrete growing quite rapidly now from reuse and reduce. materials unused or addition of additives in order to increase the quality of concrete include the addition of waste carbide (B3) is an effort to increase the element calcium is required in the reaction PENDAHULUANKualitas mutu beton sering dikaitkan dengan kuat tekan beton, semakin tinggi kuat tekan maka semakin baik kualitas dari beton. Kualitas beton tergantung dari bahan baku yang dipakai sebagai perekat atau sebagai agregat. Perekat yang biasa dipakai adalah semen dan agregat yang digunakan pasir.Inovasi beton sekarang mengalami perkembangan yang cukup pesat dari reuse dan reduce bahan material tak terpakai atau penambahan zat aditif dengan tujuan agar bertambahnya kualitas mutu beton itu sendiri dan bertambahnya nilai ekonomis dari bahan yang tak terpakai seperti abu sekam, pecahan keramik dan berbagai ampas atau bahkan limbah dari adukan beton itu sendiri.Peraturan Pemerintah Nomor 101 tahun 2014 tentang Pengelolaan Limbah Bahan Berbahaya dan Beracun mendefinisikan Bahan Berbahaya dan Beracun (B3) sebagai zat, energi, dan/atau komponen lain yang karena sifat, konsentrasi, dan/atau jumlahnya, baik secara langsung maupun tidak langsung, dapat mencemarkan dan/atau merusak lingkungan hidup, dan/atau membahayakan lingkungan hidup, kesehatan, serta kelangsungan hidup manusia dan makhluk hidup lain.Limbah B3 yang digunakan dalam penelitian adalah limbah karbit. Limbah karbit merupakan sisa dari reaksi karbit terhadap air yang menghasilkan gas acyetilene. Limbah karbit itu sendiri sangat mudah dijumpai pada bengkel-bengkel las acyetilene di daerah Lamongan yang pada umumnya tidak dilakukan pengolahan terhadap limbah karbit tersebut karena dianggap tidak bernilai ekonomis dan mengandung zat berbahaya. Seiring berkembangnya teknologi dan inovasi beton solusi pengurangan limbah karbit yang yang menumpuk di daerah Lamongan adalah dengan melakukan pemakaian kembali (Reuse) agar dapat dimanfaatkan sebagai material bahan konstruksi bangunan lain yang ramah terhadap lingkungan. Tujuannya adalah untuk dan mengurangi limbah (B3) yang dapat mencemari lingkungan sekitar dan mewujudkan pembangunan yang berkesinambungan (sustainable construction) yang dilakukan oleh masyarakat.
The main objective of this study was to find out and analyze how much the influence of the coconut shell charcoal had on changes in compressive strength and water absorption in the K-175 paving block. This research method is experimental research, which is a research of making paving block specimens, by conducting activities or experiments using coconut shell waste as a mixture of paving blocks, with a mix design mix referring to the comparison of concrete mix with K-175 quality (SNI 03-2834-2000). The conversion value of compressive strength of specimens at the age of 7 days to 28 days from specimens N, 5%, 10%, 15% and 20% is 271,80 kg/cm², 205,12 kg/cm², 102,57 kg/cm²,76,92 kg/cm² and 64,11 kg/cm² respectively. In the normal test code, the paving block is classified as class B quality, while the 5% specimen code is classified as class B quality, for the test object code 10%, 15%, and 20% do not meet the paving block quality standards. The results of the water absorption test increased in paving blocks with a combination of coconut shell charcoal. All of them have increased water infiltration on paving blocks.Tujuan utama dari penelitian ini adalah untuk mengetahui dan menganalisa seberapa besar pengaruh arang tempurung kelapa terhadap perubahan kuat tekan dan resapan air pada paving block K-175. Metode penelitian ini adalah penelitian eksperimen, yaitu penelitian pembuatan benda uji paving block, dengan cara melakukan kegiatan atau percobaan pemanfaatan limbah tempurung kelapa sebagai campuran paving block, dengan perbandingan mix design mengacu pada perbandingan campuran beton dengan mutu K-175 (SNI 03-2834-2000). Hasil nilai konversi kuat tekan benda uji pada umur 7 hari ke umur 28 hari dari benda uji N, 5%, 10%, 15%, dan 20% adalah 271,80 kg/cm², 205,12 kg/cm², 102,57 kg/cm²,76,92 kg/cm² dan 64,11 kg/cm². Pada kode benda uji normal paving block tergolong dalam mutu kelas B, sedangkan pada kode benda uji 5% tergolong dalam mutu kelas B, untuk kode benda uji 10%, 15%, dan 20% tidak memenuhi standar mutu paving block. Hasil dari uji resapan air paving block dengan penambahan arang tempurung kelapa dari benda uji 5%, 10%, 15% dan 20%. Kesemuanya mengalami peningkatan resapan air pada paving block.
The purpose of this study are to find out the process of making AC-WC asphalt by using waste tire ore as an additives to hot mix asphalt and also to find out the general effect of waste tire ore as additives in the asphalt mixture to the characteristics of AC-WC asphalt. [2].In this study, the variation of the mixture added with tire ore starting from 0%, 3%, 6% and 8% addition of tire ore waste for the highest variation value is 3%, stability value is 494.99 kg, Voids Filled With Asphalt’s value is 68,40%, value of Voids in Mix is 3.65%, flow value is 3,21 %, value of Marshall Quotient is 154,61 kg/mm, Density’s value is 2,29 gr/cc. Finally, it was concluded that the addition of waste tire ore is not in accordance with SNI 06-2489-1991 because the higher percentage value in the mixture will decrease the value of Marshall Stability.
Cost, quality, and time are mandatory targets of construction management; project work can be said to be successful if triple constants cost, quality, and time the construction work of the Karanggeneng Nawacita Cs Suspension Bridge is a JUDESA project APBN project and has a period of 19 weeks working days with a budget of Rp 8.213.826.000, in the process of implementing the bridge construction, it is not free from several technical and non-technical constraints, the method earned value in this study used to determine Early Warning and integrate the concept of time and cost from the method, it earned value can be seen the progress and performance of the project with SV, CV, SPI, CPI, ECD, and EAC, from this study the results obtained ETC Rp 3.322.492.617. ETS review of the 14th week is 39 days, and to complete the project is EAC greater than Rp 82.137.617 of contract costs. While completing the project, EAS is 137 days, requiring additional work time for 12 days. Based on the results of the analysis conducted by the service provider must take appropriate fast action to avoid excessive over budget
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.