This study investigates the fluorogenic characteristics of the chitosan-genipin reaction for applications in microencapsulation research. Results showed that the chitosan-genipin reaction generated a colored and fluorescent product, with optimal excitation and emission wavelengths at 369 and 470 nm, respectively. Furthermore, it was found that reaction conditions affected the fluorescence intensity of the product. Mixture at the ratio of 4:1 (chitosan: genipin by weight) fluoresced the most. It also fluoresced stronger if the reaction occurred at higher temperature, with the intensity of 10.4 x 10(5) CPS at 37 degrees C, 5.9 x 10(5) CPS at 20 degrees C, and 2.5 x 10(5) CPS at 4 degrees C. As well, the fluorescence of the mixture developed gradually over time, attaining the emission maxima of 2.9 x 10(5), 7.6 x 10(5), and 10.0 x 10(5) CPS in 1, 6, and 18 h, respectively. Chitosan-coated alginate microcapsules were prepared without prior labeling, to which subsequent genipin treatment was applied in order to examine the potential of using genipin in microcapsule characterization. Chitosan bound to the alginate beads interacted with genipin, from which the resultant fluorescent signals allowed for clear visualization of the chitosan coating under confocal laser scanning microscopy. The relative fluorescence intensity across the chitosan membrane was found to be considerably higher than the controls (175 vs. 50). The membrane thickness measured was 29.2 +/- 7.3 microm. These findings demonstrate a convenient and effective way of characterizing chitosan-based microcapsules using genipin as a fluorogenic marker, a technique that will be useful in microcapsule research and other biomedical applications.

The genipin cross-linked alginate-chitosan (GCAC) microcapsule, composed of an alginate core and a genipin cross-linked chitosan membrane, was recently proposed for live cell encapsulation and other delivery applications. This article for the first time describes the details of the microcapsule membrane characterization using a noninvasive and in situ method without any physical or chemical modifications on the samples. Results showed that the cross-linking reaction generated the fluorescent chitosan-genipin conjugates. The cross-linked chitosan membrane was clearly visualized by confocal laser scanning microscopy (CLSM). A straightforward assessment on the membrane thickness and relative intensity was successfully achieved. CLSM studies showed that the shell-like cross-linked chitosan membranes of approximately 37 microm in thickness were formed surrounding the microcapsule. The reaction variables, including cross-linking temperature and time significantly affected the fluorescence intensity of the membranes. Elevating the cross-linking temperature from 4 to 37 degrees C drastically intensified the membrane fluorescence, suggesting the attainment of a high degree of cross-linking on the chitosan membrane. Extended cross-linking time altered the cross-linked membranes in modulation. Although genipin concentration and cross-linking time had little effects on the membrane thickness, cross-linking at higher temperatures tended to form relatively thinner membranes.

Microencapsulation is an emerging technology in the development of bioartificial organs for drug, protein, and delivery systems. One of the advancements in establishing an appropriate membrane material for live cell and tissue encapsulation is the incorporation of poly(ethylene glycol) (PEG) to the widely studied alginate microcapsules. The current study investigates the properties of integrating PEG to microcapsules coated with poly-L-lysine (PLL) and chitosan as well as a novel microcapsule membrane which combines both PLL and chitosan. Results show that microcapsules containing PEG can support cell viability and protein secretion. The addition of PEG to PLL and chitosan-coated microcapsules improves the stability of microcapsules when exposed to a hypotonic solution. We also compared the novel microcapsule with two other previously used microcapsules including alginate-chitosan-PEG and alginate-PLL-PEG-alginate. Results show that all three membranes are capable of providing immunoprotection to the cells and have the potential for long-term storage at -80 degrees C. The novel membrane containing PEG, chitosan, and PLL, however, revealed the highest cell viability and mechanical strength when exposed to external rotational force, but it was unable to sustain osmotic pressure. The study revealed the potential of using PEG-incorporated alginate, chitosan, and PLL microcapsules for encapsulating live cells producing proteins and hormones for therapy.

The application of alginate-chitosan (AC) microcapsules to liver cell transplantation has not been previously investigated. In the current in vitro study, we have investigated the potential of AC microcapsules for the encapsulation of liver cells and show that the AC membrane supports the survival, proliferation and protein secretion by entrapped hepatocytes. The AC membrane provides cell immuno-isolation and has the potential for cell cryopreservation. The AC microcapsule has several advantages compared to more widely used alginate-poly-L-lysine (APA) microcapsules for the application of cell therapy.

A graphical method for analyzing enzyme data to obtain kinetic parameters, and to identify the types of inhibition and the enzyme mechanisms, is described. The method consists of plotting experimental data as nu/(V0 - nu) vs 1/(I) at different substrate concentrations. I is the inhibitor concentration; V0 and nu are the rates of enzyme reaction attained by the system in the presence of a fixed amount of substrate, and in the absence and presence of inhibitor, respectively. Complete inhibition gives straight lines that go through the origin; partial inhibition gives straight lines that converge on the 1-I axis, at a point away from the origin. For competitive inhibition, the slopes of the lines increase with increasing-substrate concentration; with noncompetitive inhibition, the slopes are independent of substrate concentration; with uncompetitive inhibition, the slopes of the lines decrease with increasing substrate concentrations. The kinetic parameters, Km, Ki, Ki', and beta (degree of partiality) can best be determined from respective secondary plots of slope and intercept vs substrate concentration, for competitive and noncompetitive inhibition mechanism or slope and intercept vs reciprocal substrate concentration for uncompetitive inhibition mechanism. Functional consequencs of these analyses are represented in terms of specific enzyme-inhibitor systems.