No abstract

No abstract

Herein, we proposed a new peroxymonosulfate (PMS) activation system employing the Fe(III) doped g-CN (CNF) as catalyst. Quite different from traditional sulfate radical-based advanced oxidation processes (SR-AOPs), the PMS/CNF system was capable of selectively degrading phenolic compounds (e.g., p-chlorophenol, 4-CP) in a wide pH range (3-9) via nonradical pathway. The generated singlet oxygen (O) in the PMS/CNF3 (3.46 wt % Fe) system played negligible role in removing 4-CP, and high-valent iron-oxo species fixated in the nitrogen pots of g-CN (≡Fe═O) was proposed as the dominant reactive species by using dimethyl sulfoxide as a probe compound. The mechanism was hypothesized that PMS was first bound to the Fe(III)-N moieties to generate ≡Fe═O, which effectively reacted with 4-CP via electron transfer. GC-MS analysis indicated that 4-chlorocatechol and 1,4-benzoquinone were the major intermediates, which could be further degraded to carboxylates. The kinetic results suggested that the formation of ≡Fe═O was proportional to the dosages of PMS and CNF3 under the experimental conditions. Also, the PMS/CNF3 system exhibited satisfactory removal of 4-CP in the presence of inorganic anions and natural organic matters. We believe that this study will provide a new routine for effective PMS activation by heterogeneous iron-complexed catalysts to efficiently degrade organic contaminants via nonradical pathway.

No abstract

For several decades, the iron-based Fenton-like catalysis has been believed to be mediated by hydroxyl radicals or high-valent iron-oxo species, while only sporadic evidence supported the generation of singlet oxygen (1O2) in the Haber–Weiss cycle. Herein, we report an unprecedented singlet oxygen mediated Fenton-like process catalyzed by ∼2-nm Fe2O3nanoparticles distributed inside multiwalled carbon nanotubes with inner diameter of ∼7 nm. Unlike the traditional Fenton-like processes, this delicately designed system was shown to selectively oxidize the organic dyes that could be adsorbed with oxidation rates linearly proportional to the adsorption affinity. It also exhibited remarkably higher degradation activity (22.5 times faster) toward a model pollutant methylene blue than its nonconfined analog. Strikingly, the unforeseen stability at pH value up to 9.0 greatly expands the use of Fenton-like catalysts in alkaline conditions. This work represents a fundamental breakthrough toward the design and understanding of the Fenton-like system under nanoconfinement, might cause implications in other fields, especially in biological systems.

Adsorption is one of the widely used processes in the chemical industry environmental application. As compared to mathematical models proposed to describe batch adsorption in terms of isotherm and kinetic behavior, insufficient models are available to describe and predict fixed-bed or column adsorption, though the latter one is the main option in practical application. The present review first provides a brief summary on basic concepts and mathematic models to describe the mass transfer and isotherm behavior of batch adsorption, which dominate the column adsorption behavior in nature. Afterwards, the widely used models developed to predict the breakthrough curve, i.e., the general rate models, linear driving force (LDF) model, wave propagation theory model, constant pattern model, Clark model, Thomas model, Bohart-Adams model, Yoon-Nelson model, Wang model, Wolborska model, and modified dose-response model, are briefly introduced from the mechanism and mathematical viewpoint. Their basic characteristics, including the advantages and inherit shortcomings, are also discussed. This review could help those interested in column adsorption to reasonably choose or develop an accurate and convenient model for their study and practical application.

Eutrophication of water bodies is a serious and widespread environmental problem. Achieving low levels of phosphate concentration to prevent eutrophication is one of the important goals of the wastewater engineering and surface water management. Meeting the increasingly stringent standards is feasible in using a phosphate-selective sorption system. This critical review discusses the most fundamental aspects of selective phosphate removal processes and highlights gains from the latest developments of phosphate-selective sorbents. Selective sorption of phosphate over other competing anions can be achieved based on their differences in acid–base properties, geometric shapes, and metal complexing abilities. Correspondingly, interaction mechanisms between the phosphate and sorbent are categorized as hydrogen bonding, shape complementarity, and inner-sphere complexation, and their representative sorbents are organic-functionalized materials, molecularly imprinted polymers, and metal-based materials, respectively. Dominating factors affecting the phosphate sorption performance of these sorbents are critically examined, along with a discussion of some overlooked facts regarding the development of high-performance sorbents for selective phosphate removal from water and wastewater.

No abstract