The co-mining of coal and gas is the inevitable future direction of the mining of coal resources. Taking coal mining and gas extraction as the two subsystems of the coal and gas co-mining system, to reveal the mechanism of action between coal mining and gas extraction is the premise of orderly co-mining. On the basis of a similar simulation experiment of coal and gas co-mining, by obtaining the gas migration law during the mining process and collecting a large amount of data on the coal production and gas extraction, it is found that the two subsystems of coal extraction and gas extraction in the coal and gas co-mining system promote and restrict each other. The control parameters for coal mining and gas extraction that affect co-mining are identified. To coordinate the process connection between coal mining and gas extraction, the optimal synergistic relationship of co-mining should be found. The recovery rate and economic benefit of coal and gas resources are taken as the optimization objective function of coal and gas co-mining. Taking the safety production laws, regulations, and production technology-level restrictions of coal mining and gas drainage as constraints, by constituting a nonlinear model for the collaborative optimization of coal and gas co-mining, the method of determining the optimal advancing speed and optimal gas drainage volume of the working face is proposed. By optimizing variables, such as coal mining advancement, coal mining time, gas extraction time, and gas extraction volume, the co-mining of coal and gas is ensured to be safe and efficient, and the output of coal and gas resources is optimized. The time connection and the process succession of the two subsystems are attained. An overall orderly structure is formed between the coal mining system and the gas extraction system, and the mechanism of the cooperative co-mining of coal and gas is revealed. This research has important significance with regard to improving the basic theoretical system of coal and gas co-mining. The control variables of the co-mining working face in the Shaqu mine are optimized. After optimization, the profit is increased by 16.3%, and the gas extraction rate is increased by 2.6%. The drilling spacing is optimized according to the optimization results. The simulation shows that 7 m is the optimal drilling spacing of the working face.
In order to quantitatively evaluate the degree of protection in protective layer mining and provide guidance for the design of a secondary outburst elimination scheme, a variable weight-projection gray target dynamic evaluation model for the effectiveness of protective layer mining is established. The improved order relation analysis method was used to determine the subjective weight of each index toward the decision-making goal based on numerical diversity characteristics, and the initial fixed-weight calculation for mixed multi-attribute metrics was processed through the degree of index action. The variable weight function was used to dynamically adjust the fixed weight through the penalty and incentive index methods. Four indexes (gas content, gas pressure, coal seam permeability coefficient, and expansion deformation) were selected, the outburst elimination and anti-reflection were taken as the guide, and the critical value of each index for eliminating burst and the critical value of pressure relief were taken as the positive and negative bullseyes. Based on the variable weight-projection gray target decision model, the distance between the two target centers of each scheme was calculated; at the same time, the variable weight vector changed dynamically with the evaluation scheme to achieve the dynamic quantitative evaluation of the degree of protection. Additionally, compared with the calculation results of fixed weights, it was found that the variable weight-projection bullseye distance can more accurately reflect the dynamic control effect of differences in numerical combinations of multi-attribute indexes in different decision schemes based on the degree of protection of protective layer mining. Taking a mine in PingMei as the engineering background, Ding protected the Wu area, and the degree of protection in the Wu group coal seam reached 116.29%, eliminating the outburst risk of the coal seam. The Wu protected the Ji group coal seam, with the degree of outburst risk in the Ji group being reduced by 14.27, and the Ding+Wu group protected the Ji group coal seam, with the degree of outburst risk of the Ji group being reduced by 20.71%, but not eliminated. The evaluation model quantifies the degree of protection of protective layer mining, and provides a theoretical basis for further assessing whether the working face should strengthen the enhancing permeability or whether it needs to be used in tandem with high-strength outburst elimination methods.
In order to obtain the minimum mining height that can play an effective protective role in the mining of the non-full coal protective layer in the Hongyang No. 3 coal mine and improve its economic benefits, the relationship between the mining height and the pressure relief of the protected layer is studied. Theoretical analysis is used to establish a calculation model of the goaf stress distribution law, with the mining height as a variable. The calculation model research results show that the mining height adjusts the goaf stress distribution by adjusting the range of the “three zones”. The force of the falling zone and the frustration zone on the goaf is approximately trapezoidal geostatic stress, and the roof stress in the vertical projection area of the trapezoidal waistline is not transmitted to the goaf. The development heights of the “two zones” are different at different mining heights, and the corresponding pressure-relief ranges are different from the waistline vertical projection. The curved subsidence zone transmits stress to the goaf through the fissure zone and the caving zone below, which can be calculated by the elastic foundation beam model. The falling zone is the elastic foundation, and different mining heights have different foundation coefficients. With the increase in mining heights, the foundation coefficients first decrease and then tend to be stable. The pressure-relief range of the stress transmitted from the curved subsidence zone to the goaf first increases and then tends to be stable. According to the calculation model, the minimum mining height for effective pressure relief of the upper protective layer of thin coal in the Hongyang No. 3 coal mine is 2.5 m, which can effectively relieve the pressure of the protected layer with the floor layer spacing of 48 m.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.