Ternary organic solar cells enjoy both the enhanced light absorption by incorporating multiple organic materials in tandem solar cells and the simplicity of processing conditions that are used in single bulk heterojunction solar cells.

Filterless narrowband response organic photodetectors (OPDs) present a great challenge due to the broad absorption range of organic semiconducting materials. The reported narrowband response OPDs also suffer from low external quantum efficiency (EQE) in the desired response window and low rejection ratio. Here, we report highly narrowband photomultiplication (PM) type OPDs based on P3HT:PCBM (100:1, wt/wt) as active layer without an optical filter. The full width at half-maximum (fwhm) of the PM-type OPDs can be well retained less than 30 nm under different biases. Meanwhile, the champion EQE and rejection ratio approach 53 500% and 2020 at -60 V bias, respectively. The small fwhm should be attributed to the sharp absorption edge of active layer with small amount of PCBM. The PM phenomenon is attributed to hole tunneling injection from the external circuit assisted by trapped electron in PCBM near the Al electrode under light illumination. These highly narrowband PM-type OPDs should have great potential applications in sensitively detecting specific wavelength light and be blind to light outside of the desired response window.

The extraordinary optoelectronic performance of hybrid organic-inorganic perovskites has resulted in extensive efforts to unravel their properties. Recently, observations of ferroic twin domains in methylammonium lead triiodide drew significant attention as a possible explanation for the current-voltage hysteretic behaviour in these materials. However, the properties of the twin domains, their local chemistry and the chemical impact on optoelectronic performance remain unclear. Here, using multimodal chemical and functional imaging methods, we unveil the mechanical origin of the twin domain contrast observed with piezoresponse force microscopy in methylammonium lead triiodide. By combining experimental results with first principles simulations we reveal an inherent coupling between ferroelastic twin domains and chemical segregation. These results reveal an interplay of ferroic properties and chemical segregation on the optoelectronic performance of hybrid organic-inorganic perovskites, and offer an exploratory path to improving functional devices.

Silica nanoparticles grafted with poly(methyl acrylate) (PMA) chains anchored by a maleimide-anthracene cycloadduct were synthesized to demonstrate mechanochemically selective activation of mechanophores at heterogeneous interfaces. By quantifying the anthracene-containing cleaved PMA polymers, which are generated via retro-[4 + 2] cycloaddition reactions, the first-order kinetic coefficient was determined. Activation characteristics of mechanophores anchored to a nanoparticle exhibit behavior similar to mechanophore-linked polymers, e.g., threshold molecular weight and linear increase in rate coefficient with molecular weight above the threshold. This model system is thus valuable as a probe to test stress activation of interfacially bonded mechanophores relevant to the design of fiber-reinforced polymer composites.

No abstract

An epoxy group was successfully attached to the surface of silicon nanoparticle (SiNPs) via a silanization reaction between silanol-enriched SiNPs and functional silanes. The epoxy-functionalized SiNPs showed a much improved cell performance compared with the pristine SiNPs because of the increased stability with electrolyte and the formation of a covalent bond between the epoxy group and the polyacrylic acid binder. Furthermore, the anode laminate made from epoxy-SiNPs showed much enhanced adhesion strength. Post-test analysis shed light on how the epoxy-functional group affects the physical and electrochemical properties of the SiNP anode.

Silicon is a promising anode material for lithium‐ion batteries with its superior capacity. However, the drastic volume changes during lithiation/delithiation cycles hinder the cycling performance, resulting in particle pulverization, conductivity loss, and an unstable electrode–electrolyte interface. Herein, a series of synthetic polymeric binders, poly(acrylic acid‐co‐tetra(ethylene glycol) diacrylate)—featuring a poly(acrylic acid) (PAA) backbone branched via tetra(ethylene glycol) diacrylate (TEGDA)—are developed that edge toward evidencing well‐balanced properties to confront capacity fading in Si‐based electrodes. The incorporation of ether chain not only leads to the branching architecture of the PAA backbone, thus affecting its mechanical properties, but also promotes the conductivity of Li ions. As a result, a synergistic performance improvement is observed in both half and full cells. The best‐performing cell using a branched PAA binder (bPAA) with a feeding molar ratio ([TEGDA]:[acrylic acid(AA)]) of 0.2 results in a 10% increase in initial capacity and a 31% increase in capacity retention over 100 cycles compared to the linear PAA cell. The cross‐sectional microscopic images of the cycled electrodes reveal that bPAA binders can drastically reduce the electrode expansion. This improvement results from the well‐balanced properties of the polymer design, which could guide further development for more advanced binder materials.

Casein is almost insoluble at around pH 4.6, which is its isoelectric point (pI). Grafting copolymer, casein-g-dextran, was prepared through the Amadori rearrangement of the Maillard reaction. The copolymer has a reversible pH sensitive property: micellization at the pI of casein forming a casein core and dextran shell structure and dissociation when pH differs from the pI. The micelles produced at pH 4.6 have a spherical shape and their size is dependent on the Maillard reaction: reaction time, molar ratio of casein to dextran, and molecular weight of dextran used. Typically, the hydrodynamic diameter of the micelles is about 100 nm and the critical micelle concentration is about 10 mg/L. The micelles are very stable in aqueous solution and can be stored as lyophiled powder. The micelles are able to encapsulate hydrophobic compounds such as pyrene.