High-entropy ceramics (HECs) are solid solutions of inorganic compounds with one or more Wyckoff sites shared by equal or near-equal atomic ratios of multi-principal elements. Although in the infant stage, the emerging of this new family of materials has brought new opportunities for material design and property tailoring. Distinct from metals, the diversity in crystal structure and electronic structure of ceramics provides huge space for properties tuning through band structure engineering and phonon engineering. Aside from strengthening, hardening, and low thermal conductivity that have already been found in high-entropy alloys, new properties like colossal dielectric constant, super ionic conductivity, severe anisotropic thermal expansion coefficient, strong electromagnetic wave absorption, etc., have been discovered in HECs. As a response to the rapid development in this nascent field, this article gives a comprehensive review on the structure features, theoretical methods for stability and property prediction, processing routes, novel properties, and prospective applications of HECs. The challenges on processing, characterization, and property predictions are also emphasized. Finally, future directions for new material exploration, novel processing, fundamental understanding, in-depth characterization, and database assessments are given.

In this study, yolk-shell Ni@SnO composites with a designable interspace were successfully prepared by the simple acid etching hydrothermal method. The Ni@void@SnO composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results indicate that interspaces exist between the Ni cores and SnO shells. Moreover, the void can be adjusted by controlling the hydrothermal reaction time. The unique yolk-shell Ni@void@SnO composites show outstanding electromagnetic wave absorption properties. A minimum reflection loss (RL) of -50.2 dB was obtained at 17.4 GHz with absorber thickness of 1.5 mm. In addition, considering the absorber thickness, minimal reflection loss, and effective bandwidth, a novel method to judge the effective microwave absorption properties is proposed. On the basis of this method, the best microwave absorption properties were obtained with a 1.7 mm thick absorber layer (RL= -29.7 dB, bandwidth of 4.8 GHz). The outstanding electromagnetic wave absorption properties stem from the unique yolk-shell structure. These yolk-shell structures can tune the dielectric properties of the Ni@air@SnO composite to achieve good impedance matching. Moreover, the designable interspace can induce interfacial polarization, multiple reflections, and microwave plasma.

The flower-like CuS hollow microspheres exhibit the advantages of strong absorption, thin thickness, wide absorption band width and lightweight.

In this work, amorphous TiO2 and SiO2-coated Ni composite microspheres were successfully prepared by a two-step method. The phase purity, morphology, and structure of composite microspheres are characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). Due to the presence of the insulator SiO2 shell, the core-shell Ni-SiO2 composite microspheres exhibit better antioxidation capability than that of pure Ni microspheres. The core-shell Ni-SiO2 composite microspheres show the best microwave absorption properties than those of pure Ni microspheres and Ni-TiO2 composites. For Ni-SiO2 composite microspheres, an optimal reflection loss (RL) as low as -40.0 dB (99.99% absorption) was observed at 12.6 GHz with an absorber thickness of only 1.5 mm. The effective absorption (below -10 dB, 90% microwave absorption) bandwidth can be adjusted between 3.1 GHz and 14.4 GHz by tuning the absorber thickness in the range of 1.5-4.5 mm. The excellent microwave absorption abilities of Ni-SiO2 composite microspheres are attributed to a higher attenuation constant, Debye relaxation, interface polarization of the core-shell structure and synergistic effects between high dielectric loss and high magnetic loss.

In this work, dendritelike and rodlike NiCu alloys were prepared by a one-pot hydrothermal process at various reaction temperatures (120, 140, and 160 °C). The structure and morphology were analyzed by scanning electron microscopy, energy-dispersive spectrometry, X-ray diffraction, and transmission electron microscopy, which that demonstrate NiCu alloys have core-shell heterostructures with Ni as the shell and Cu as the core. The formation mechanism of the core-shell structures was also discussed. The uniform and perfect dendritelike NiCu alloy obtained at 140 °C shows outstanding electromagnetic-wave absorption properties. The lowest reflection loss (RL) of -31.13 dB was observed at 14.3 GHz, and the effective absorption (below -10 dB, 90% attenuation) bandwidth can be adjusted between 4.4 and 18 GHz with a thin absorber thickness in the range of 1.2-4.0 mm. The outstanding electromagnetic-wave-absorbing properties are ascribed to space-charge polarization arising from the heterogeneous structure of the NiCu alloy, interfacial polarization between the alloy and paraffin, and continuous micronetworks and vibrating microcurrent dissipation originating from the uniform and perfect dendritelike shape of NiCu prepared at 140 °C.

In this study, we fabricated conductive poly(vinylidene fluoride) (PVDF)/carbon composites simply by dispersing multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets into a PVDF solution. The electrical conductivity and the electromagnetic interference (EMI) shielding of the PVDF/carbon composites were increased by increasing the conductive carbon filler amounts. Moreover, we also found that the EMI shielding properties of the PVDF/CNT/graphene composites were higher than those of PVDF/CNT and PVDF/graphene composites. The mean EMI shielding values of PVDF/5 wt %-CNT, PVDF/10 wt %-graphene, and PVDF/CNT/graphene composite films with a thickness of 0.1 mm were 22.41, 18.70, and 27.58 dB, respectively. An analysis of the shielding mechanism showed that the main contribution to the EMI shielding came from the absorption mechanism, and that the EMI shielding could be tuned by controlling the films' thickness. The total shielding of the PVDF/CNT/graphene films increased from 21.90 to 36.46 dB as the thickness was increased from 0.06 mm to 0.25 mm. In particular, the PVDF/carbon composite films, with a thickness of 0.1 mm, achieved the highest specific shielding values of 1 310 dB cm/g for the PVDF/5 wt %-CNT composite and 1 557 dB cm/g for the PVDF/CNT/graphene composite, respectively. This was due to the ultrathin thickness. Our study provides the groundwork for an effective way to design flexible, ultrathin conductive polymer composite film for application in miniaturized electronic devices.

Two-dimensional materials, especially the newly emerging MXene, have attracted numerous interests in the fields of energy conversion/storage and electromagnetic shielding/absorption. However, the inherently inevitable aggregation and absence of magnetic loss of MXene considerably limit its electromagnetic absorption application. The introduction of magnetic component and favorable structural engineering are the alternatives to improve the microwave absorption (MA) performance. Herein, we report a spheroidization strategy to assemble double-shell MXene@Ni microspheres, where the commonly lamellar MXene are reshaped into three-dimensional microspheres that provide the substrate for oriented growth of Ni nanospikes. Whereas this structural feature offers massive accessible active surfaces that effectively promote the dielectric loss ability, the introduction of magnetic Ni nanospikes enables the additional magnetic loss capacity. Benefiting from these merits, the synthesized 3D MXene@Ni microspheres exhibit superior MA performance with the minimum reflection loss value of −59.6 dB at an ultrathin thickness (∼1.5 mm) and effective absorption bandwidth of 4.48 GHz. Moreover, the electron holography results reveal that the high-density anisotropy magnetism plays an important role in the improvement of MA performance, which provides an insight for the design of MXene-based materials as high-efficient microwave absorbers.

Electromagnetic (EM) pollution affecting people's normal lives and health has attracted considerable attention in the current society. In this work, a promising EM wave absorption and shielding material, MXene/Ni hybrid, composed of one-dimensional Ni nanochains and two-dimensional Ti 3 C 2 T x nanosheets (MXene), is successfully designed and developed. As expected, excellent EM wave absorption and shielding properties are obtained and controlled by only adjusting the MXene content in the hybrid. A minimum reflection loss of −49.9 dB is obtained only with a thickness of 1.75 mm at 11.9 GHz when the MXene content is 10 wt %. Upon further increasing the MXene content to 50 wt %, the optimal EM shielding effectiveness (SE) reaches 66.4 dB with an absorption effectiveness (SE A ) of 59.9 dB. Mechanism analysis reveals that the excellent EM wave absorption and shielding performances of the hybrid are contributed to the synergistic effect of conductive MXene and magnetic Ni chains, by which, the dielectric properties and electromagnetic loss can be easily controlled to obtain appropriate impedance matching conditions and good EM wave dissipation ability. This work provides a simple but effective route to develop MXene-based EM wave absorption and shielding materials. A universal guideline for designing the absorbing and shielding materials for the future is also proposed.