WprowadzenieDynamiczny rozwój górnictwa węglowego, który rozpoczął się na przełomie XVIII i XIX w., jako jedno z następstw rewolucji przemysłowej, spowodował szereg negatywnych następstw dla środowiska, do których zaliczyć możemy osiadanie znacznych obszarów, a w konsekwencji zwiększenie retencji powierzchniowej i zanieczyszczenie środowiska wodnego. Nie ulega wątpliwości, że działalność górnicza jest głównym czynnikiem powodującym przeobrażenia środowiska na terenie Górnośląskiego Zagłębia Węglowego. Obecnie, ze względu na wyczerpywanie się zasobów oraz utratę rentowności wydobycia, coraz częściej prowadzi się czynności zmierzające do likwidacji kopalń. Wydaje się, iż pomimo konieczności przeznaczania na ten cel znacznych środków finansowych, długiego okresu realizacji tego zamierzenia inwestycyjnego oraz znacznego stopnia skomplikowania tego procesu nie przykłada się dotychczas, szczególnie w naszym kraju, należytej uwagi do rzetelnej i terminowej realizacji tego rodzaju przedsięwzięć.Jednym z narzędzi, które mogą być pomocne w ocenie tego skomplikowanego przedsięwzięcia inwestycyjnego, jest ocena oddziaływania na środowisko, która stanowi podstawowy instrument prawny umożliwiający kompleksową ocenę wpływu zamierzenia inwestycyjnego na środowisko. Konsekwencją właściwie przeprowadzonej likwidacji powinno być trwałe zminimalizowanie negatywnego oddziaływania środowiskowego byłego zakładu górniczego. W pracy analizie poddano dwa odmienne sposoby prowadzenia procesu likwidacyjnego: tradycyjną, polegającą na zalaniu wyrobisk górniczych przez wody kopalniane, i metodę zastosowaną w KWK Abstract Currently, mainly because of depletion of resources and generally losses on the profitability, increasingly activities are carried out leading to the mine closure. One of the tools, which can be helpful in assessing of this complex investment process is the environmental impact assessment. The last mentioned is an essential legal instrument for the comprehensive assessment of the environmental impact of investment projects. The consequence of properly carried out liquidation process should result in limitation of negative environmental impact of closed mine.
ZNAMIONA PROCESÓW KWAŚNEGO DRENAŻU W WARSTWACH KONSTRUKCYJNYCH NAWIERZCHNI DROGOWYCH ZAWIERAJĄCYCH KRUSZYWA NATURALNE Wprowadzenie Kruszywa naturalne stanowią podstawowy składnik mieszanek mineralno-asfaltowych (ok. 95% wag.). W produkcji mieszanek mineralno-asfaltowych przeznaczonych do warstwy ścieralnej, z uwagi na jej szczególną rolę w konstrukcji drogowej, stosuje się najlepszej jakości kruszywa łamane wytwarzane z surowców skalnych o wysokich parametrach mechanicznych. Zaliczają się do nich głównie kruszywa ze skał magmowych (bazalt, gabro) oraz metamorficznych (amfibolit, serpentynit), rzadziej osadowych (dolomit, szarogłaz). Zauważono, że kruszywa z niektórych skał cechuje pewna niejednorodność ziaren w zakresie barwy, a liczebność populacji tych ziaren, zwykle w granicach kilkunastu procent, ma związek z intensywnością występowania brunatnych wykwitów na powierzchni warstw ścieralnych. Jednocześnie badania petrograficzne tych ziaren wykluczyły hipotezę, według której mogły one być zanieczyszczeniem obcym w postaci żużla pohutniczego. W kilku przypadkach stwierdzono ponad wszelką wątpliwość, że obecność zjawiska miała związek z powstaniem lokalnych uszkodzeń nawierzchni, stąd też za główny cel programu badań przyjęto rozpoznanie przyczyn i mechanizmów powstawania wykwitów. Obserwacje terenoweZróżnicowanie barwy ziaren kruszywa było obserwowane na pryzmach kruszyw naturalnych składowanych na wytwórniach mieszanek mineralno-asfaltowych AbstractIn some aggregates used to produce asphalt mixes there were revealed mineral transformations which are typical for acid drainage processes. The main process which was observed in the course of these changes was iron leaching from primary minerals of rocks which are the raw material for production of aggregates. Mineralogical studies allowed also to determine the presence of other, less resistant to weathering, primary minerals which are potential sources of metals such as nickel, copper, zinc and lead. Disclosure of the mechanism of leaching of metals from aggregates used in road construction, in spite of its low intensity, indicates the necessity of more accurate diagnosis of their mineral composition. It is particularly important in case of using them in massive, unbounded layers, potentially available for water, such as base courses.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.