No abstract

Polyacrylonitrile (PAN) nanofiber mats are typical precursors for carbon nanofibers. They can be fixed or even elongated during stabilization and subsequent carbonization to gain straight, mechanically robust carbon nanofibers. These processes necessitate additional equipment or are—if the nanofiber mats are just fixed at the edges—prone to resulting in the specimens breaking, due to an uneven force distribution. Hence, we showed in a previous study that electrospinning PAN on aluminum foils and stabilizing them fixed on these substrates, is a suitable solution to keep the desired morphology after stabilization and incipient carbonization. Here, we report on the influence of different metallic and semiconductor substrates on the physical and chemical properties of the nanofiber mats after stabilization and carbonization at temperatures up to 1200 °C. For stabilization on a metal substrate, an optimum stabilization temperature of slightly above 240 °C was found, approached with a heating rate of 0.25 K/min. Independent from the substrate material, SEM images revealed less defect fibers in the nanofiber mats stabilized and incipiently carbonized on a metal foil. Finally, high-temperature carbonization on different substrates is shown to allow for producing metal/carbon nano-composites.

New ecological trends and changes in consumer behavior are known to favor biofilm formation in household appliances, increasing the need for new antimicrobial materials and surfaces. Their development requires laboratory-cultivated biofilms, or biofilm model systems (BMS), which allow for accelerated growth and offer better understanding of the underlying formation mechanisms. Here, we identified bacterial strains in wildtype biofilms from a variety of materials from domestic appliances using matrix-assisted laser desorption/ionization-time of flight mass spectroscopy (MALDI-TOF-MS). Staphylococci and pseudomonads were identified by MALDI-TOF-MS as the main genera in the habitats and were analyzed for biofilm formation using various in vitro methods. Standard quantitative biofilm assays were combined with scanning electron microscopy (SEM) to characterize biofilm formation. While Pseudomonas putida, a published lead germ, was not identified in any of the collected samples, Pseudomonas aeruginosa was found to be the most dominant biofilm producer. Water-born Pseudomonads were dominantly found in compartments with water contact only, such as in detergent compartment and detergent enemata. Furthermore, materials in contact with the washing load are predominantly colonized with bacteria from the human.

Terpenoids are natural plant-derived products that are applied to treat a broad range of human diseases, such as airway infections and inflammation. However, pharmaceutical applications of terpenoids against bacterial infection remain challenging due to their poor water solubility. Here, we produce invasomes encapsulating thymol, menthol, camphor and 1,8-cineol, characterize them via cryo transmission electron microscopy and assess their bactericidal properties. While control- and cineol-invasomes are similarly distributed between unilamellar and bilamellar vesicles, a shift towards unilamellar invasomes is observable after encapsulation of thymol, menthol or camphor. Thymol- and camphor-invasomes show a size reduction, whereas menthol-invasomes are enlarged and cineol-invasomes remain unchanged compared to control. While thymol-invasomes lead to the strongest growth inhibition of S. aureus, camphor- or cineol-invasomes mediate cell death and S. aureus growth is not affected by menthol-invasomes. Flow cytometric analysis validate that invasomes comprising thymol are highly bactericidal to S. aureus. Notably, treatment with thymol-invasomes does not affect survival of Gram-negative E. coli. In summary, we successfully produce terpenoid-invasomes and demonstrate that particularly thymol-invasomes show a strong selective activity against Gram-positive bacteria. Our findings provide a promising approach to increase the bioavailability of terpenoid-based drugs and may be directly applicable for treating severe bacterial infections such as methicillin-resistant S. aureus.

During electrospinning, the flying nanofibers can be attracted by conductive areas such as copper tape on a nonconductive substrate, especially in case of magnetic nanofibers. The question arises, however, whether the conductivity or any other physical properties of these areas are responsible for this effect. Here, electrospinning polyacrylonitrile (PAN) on nonconductive polypropylene (PP) substrates is reported, modified with conductive copper tape as well as with diverse coatings with varying dielectric constants. The results show that in case of non‐magnetic PAN fibers, especially BaTiO3 with its high dielectric constant strongly, attracts the fibers formed during electrospinning, which can be explained by local modification of the electric field due to the introduced dielectric. This process can be used to tailor the nanofiber mat thickness depending on the position.