Control over carrier type and doping levels in semiconductor materials is key for optoelectronic applications. In colloidal quantum dots (CQDs), these properties can be tuned by surface chemistry modification, but this has so far been accomplished at the expense of reduced surface passivation and compromised colloidal solubility; this has precluded the realization of advanced architectures such as CQD bulk homojunction solids. Here we introduce a cascade surface modification scheme that overcomes these limitations. This strategy provides control over doping and solubility and enables n-type and p-type CQD inks that are fully miscible in the same solvent with complete surface passivation. This enables the realization of homogeneous CQD bulk homojunction films that exhibit a 1.5 times increase in carrier diffusion length compared with the previous best CQD films. As a result, we demonstrate the highest power conversion efficiency (13.3%) reported among CQD solar cells.

No abstract

Tandem solar cells involving metal-halide perovskite subcells offer routes to power conversion efficiencies (PCEs) that exceed the single-junction limit; however, reported PCE values for tandems have so far lain below their potential due to inefficient photon harvesting. Here we increase the optical path length in perovskite films by preserving smooth morphology while increasing thickness using a method we term boosted solvent extraction. Carrier collection in these filmsas madeis limited by an insufficient electron diffusion length; however, we further find that adding a Lewis base reduces the trap density and enhances the electron-diffusion length to 2.3 µm, enabling a 19% PCE for 1.63 eV semi-transparent perovskite cells having an average near-infrared transmittance of 85%. The perovskite top cell combined with solution-processed colloidal quantum dot:organic hybrid bottom cell leads to a PCE of 24%; while coupling the perovskite cell with a silicon bottom cell yields a PCE of 28.2%.

The electroreduction of C1 feedgas to high-energy-density fuels provides an attractive avenue to the storage of renewable electricity. Much progress has been made to improve selectivity to C1 and C2 products, however, the selectivity to desirable high-energy-density C3 products remains relatively low. We reason that C3 electrosynthesis relies on a higher-order reaction pathway that requires the formation of multiple carbon-carbon (C-C) bonds, and thus pursue a strategy explicitly designed to couple C2 with C1 intermediates. We develop an approach wherein neighboring copper atoms having distinct electronic structures interact with two adsorbates to catalyze an asymmetric reaction. We achieve a record n-propanol Faradaic efficiency (FE) of (33 ± 1)% with a conversion rate of (4.5 ± 0.1) mA cm−2, and a record n-propanol cathodic energy conversion efficiency (EEcathodic half-cell) of 21%. The FE and EEcathodic half-cell represent a 1.3× improvement relative to previously-published CO-to-n-propanol electroreduction reports.

Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduceddimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m 2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m 2 . By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m 2 .

Multi-junction solar cells based on solution-processed metal halide perovskites offer a route to increased power conversion efficiency (PCE); however, the limited options for infrared (IR)-absorbing back cells have constrained progress.

In thin-film photovoltaic (PV) research and development, it is of interest to determine where the chief losses are occurring within the active layer. Herein, a method is developed and presented by which the spatial distribution of charge collection, operando, is ascertained, and its application in colloidal quantum dot (CQD) solar cells is demonstrated at a wide range of relevant bias conditions. A systematic computational method that relies only on knowledge of measured optical parameters and bias-dependent external quantum efficiency spectra is implemented. It is found that, in CQD PV devices, the region near the thiol-treated hole-transport layer suffers from low collection efficiency, as a result of bad band alignment at this interface. The active layer is not fully depleted at short-circuit conditions, and this accounts for the limited short-circuit current of these CQD solar cells. The high collection efficiency outside of the depleted region agrees with a diffusion length on the order of hundreds of nanometers. The method provides a quantitative tool to study the operating principles and the physical origins of losses in CQD solar cells, and can be deployed in thin-film solar cell device architectures based on perovskites, organics, CQDs, and combinations of these materials.

Monolithically integrated hybrid tandem solar cells (TSCs) that combine solution‐processed colloidal quantum dot (CQD) and organic molecules are a promising device architecture, able to complement the absorption across the visible to the infrared. However, the performance of organic/CQD hybrid TSCs has not yet surpassed that of single‐junction CQD solar cells. Here, a strategic optical structure is devised to overcome the prior performance limit of hybrid TSCs by employing a multibuffer layer and a dual near‐infrared (NIR) absorber. In particular, a multibuffer layer is introduced to solve the problem of the CQD solvent penetrating the underlying organic layer. In addition, the matching current of monolithic TSCs is significantly improved to 15.2 mA cm−2 by using a dual NIR organic absorber that complements the absorption of CQD. The hybrid TSCs reach a power conversion efficiency (PCE) of 13.7%, higher than that of the corresponding individual single‐junction cells, representing the highest efficiency reported to date for CQD‐based hybrid TSCs.