We review two strategies for growing ZnO nanowires from zinc salts in aqueous and organic solvents. Wire arrays with diameters in the nanoscale regime can be grown in an aqueous solution of zinc nitrate and hexamethylenetetramine. With the addition of poly(ethylenimine), the lengths of the wires have been increased to 25 mum with aspect ratios over 125. Additionally, these arrays were made vertical by nucleating the wires from oriented ZnO nanocrystals. ZnO nanowire bundles have been produced by decomposing zinc acetate in trioctylamine. By the addition of a metal salt to the solution, the ZnO wires can be doped with a range of transition metals. Specifically, ZnO nanowires were homogeneously doped with cobalt and showed a marked deviation from paramagnetic behavior. We conclude by highlighting the use of these solution-grown nanowire arrays in dye-sensitized solar cells. The nanowire cells showed an improvement in the charge collection efficiency over traditional nanoparticle cells.

We present an all-oxide solar cell fabricated from vertically oriented zinc oxide nanowires and cuprous oxide nanoparticles. Our solar cell consists of vertically oriented n-type zinc oxide nanowires, surrounded by a film constructed from ptype cuprous oxide nanoparticles. Our solution-based synthesis of inexpensive and environmentally benign oxide materials in a solar cell would allow for the facile production of large-scale photovoltaic devices. We found that the solar cell performance is enhanced with the addition of an intermediate oxide insulating layer between the nanowires and the nanoparticles. This observation of the important dependence of the shunt resistance on the photovoltaic performance is widely applicable to any nanowire solar cell constructed with the nanowire array in direct contact with one electrode.

In nature, nitrogen fixation is one of the most important life processes and occurs primarily in microbial organisms containing enzymes called nitrogenases. These complex proteins contain two distinct subunits with different active sites, with the primary N2 binding site being a FeMoS core cluster that can be reduced by other nearby iron-sulfur clusters. Although nitrogen reduction to ammonia in biology does not require the absorption of light, there is considerable interest in developing catalyst materials that could drive the formation of ammonia from nitrogen photochemically. Here, we report that chalcogels containing FeMoS inorganic clusters are capable of photochemically reducing N2 to NH3 under white light irradiation, in aqueous media, under ambient pressure and room temperature. The chalcogels are composed of [Mo2Fe6S8(SPh)3](3+) and [Sn2S6](4-) clusters in solution and have strong optical absorption, high surface area, and good aqueous stability. Our results demonstrate that light-driven nitrogen conversion to ammonia by MoFe sulfides is a viable process with implications in solar energy utilization and our understanding of primordial processes on earth.