In this research work, copper and CNTs have been processed using high energy milling in different milling times (5, 10 and 15 hours). FESEM and XRD have been used to characterize the milled powders. The FESEM micrographs of the milled powders indicated that the morphology of powders changed from spherical shape to flake as milling time increased. The effect of sintering temperature as well as CNTs content on the properties of Cu-CNTs nanocomposite has been investigated. The optimum sintering temperature to produce Cu-CNTs nanocomposites is determined to be 900 o C. The microstructure and phase analysis of Cu-CNTs nanocomposites were studied by field emission scanning electron microscopy and X-ray diffraction. Mechanical properties of nanocomposite samples at various sintering temperatures were investigated. Cu-CNTs nanocomposite with 4 vol.% CNTs fabricated by powder metallurgy method indicated the highest value of the microhardness and bending strength as compared to pure copper.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.