In a power plant unit whose main fuel is coal, there is generally use a belt conveyor installation. This conveyor belt serves to supply coal from the crusher unit to the combustion chamber of the power generation unit. In this study, we discuss a case where the installation of a belt conveyor which was initially only one line was then made a new branch that supplies coal to other power generating units. Equitable capacity distribution and continuity of coal distribution are the main focus of this study. Therefore, a design of automatic control system of coal flow divider on belt conveyor installation was designed. The working principle of this coal flow splitting system is to control the movement of the straight blade plough that directs the flow of coal to each unit at the certain time and continuously. Straight blade plough in the form of steel metal plate with a thickness of about 10 millimeters in which one end is connected to the end of the pneumatic cylinder. Automatic control system of coal flow divider in belt conveyor installation designed using CX-Programmer and CX-Designer applications. CX-Programmer serves to create automatic control logic concepts. While the CX-designer functions to create a Human Machine Interface (HMI), making it easier for operators to control the course of the coal supply process. The results of this study are in the form of control logic lines that can be applied to Programmable Logic Control (PLC) device and Human Machine Interface (HMI) equipment.
The objective of this research is to investigate employee satisfaction in one of Indonesian business firms named BM*. The study also tries to identify different factors influencing on employee satisfaction in the firm and to give appropriate suggestion for performance improvement. Methodology of this research is based on a survey and a questionnaire based on Human Resource Index (HRI) with measure 15 is used for the assessment. The results show that employee satisfaction of BM* was relatively high. However, some of the attributes show the HRI were low. The study gives some insight to improve the customer satisfaction.
Due to its rust resistance properties, the use of stainless steels, especially SUS304 for industrial equipment is increasing. The manufacturing process that is often used is GMAW welding. One of the disadvantages of SUS304 is the occurrence of distortion and sensitization when welded. In this study, the effect of temperature variations of Static Thermal Tensioning on angle distortion and microstructure behavior due to GMAW welding of SUS 304 T-joint plates was studied. Heating by electric heater is given to both parts of the base metal plate SUS 304 5mm thick with temperature variations of 200 oC, 250 oC and 300 oC. Cooling water with a temperature of 24 oC is provided on the back side of the welded track. Welding using filler ER 304 with a diameter of 0.8 mm with welding parameters such as welding current, voltage, gas flow and travel speed controlled at 75 A, 22 V, 10 l/min and 8 mm/s, respectively. Angular distortion of welding results for each treatment temperature variation was measured using a bevel protractor, and perform metallographic test to knowing the microstructural behavior. The results of the measurement of the average angular distortion of three repetitions show that at a temperature of 250 C static thermal tensioning produces the smallest angular distortion of 3ᵒ70', compared to other temperature variations which produce angular distortion 4o45’ at 200 oC and 3o86' at temperature 300 oC. The findings of the largest Cr (carbide) deposits due to sensitization were found at a temperature of 300 oC at 16,49% and the lowest at a temperature of 200 oC at 7,05%
The inconsistency of the wind flow considered as one of the factors which tend to decrease the performance of the wind turbine. This paper proposes a further analysis of the initial rotation characteristic of a hybrid Savonius - Darrieus wind turbine. The addition of the Darrieus blade intends to increase the aerodynamic stability of the overlapping Savonius turbine. This study implements 2D CFD transient analysis using the 6DOF methods in 0<sup>0</sup>, 30<sup>0</sup>, 60<sup>0</sup>, and 90<sup>0</sup> Darrieus blade position along with 2 m/s, 4 m/s, and 6 m/s wind speed variations. The results of the aerodynamic analysis show that the location of the Darrieus 30<sup>0</sup> turbine provides the greatest initial repulsion, especially when the turbine rotation is above 90<sup>0</sup>, the position of the Darrieus blade can provide additional impulse force when the Savonius turbine tends to be passive. This effect occurs more significant at higher wind speeds. Savonius with 3-blade modification has a more stable level of force distribution than the 2-blade modification, although the value is smaller. This shows that the 3-blade Savonius provide a higher stability of angular velocity development.
Almost of kids in the world still bring a lunch box and a bottle of water in their bag when their go to school. His mother always prepares a lunch box complete with a bottle of drinking water, hoping that his son can enjoy his favorite lunch and avoid starvation. Sometimes the mother is very worried when the lunch box has been brought by the child but the water bottle is left behind. Then the mother was willing to take her child's water bottle to her school. This is certainly not expected by either the mother or the child. As a form of concern for the author to this problem, the author proposes a lunch box design with a lunch box lid that also functions as a drinking water bottle. The idea of this design proposal is ones grab, both are food & drink in your hand. The goal is how to make a kids can grab their food and drink easily and practice. So it is proposed to modify a top cover of common foodpack to become a drink bag. The design process begins with analyzing market needs, making sketches, creating 3D design models using the Autodesk Inventor CAD application, material selection, and product evaluation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.