To satisfy the smart grid electrical network, communication systems in high-voltage substations have to be installed in order to control equipments. Considering that those substations were not necessarily designed for adding communication networks, one of the most appropriate solutions is to use wireless sensor network (WSN). However, the high voltage transported through the station generates a strong and specific radio noise. In order to prepare for such a network, the electromagnetic environment has to be characterized and tests in laboratories have to be performed to estimate the communication performances. This paper presents a method for measuring the noise due to high voltage and more particularly the impulsive noise. In the laboratory, we generate the impulsive noise using two specimens, and we show that these laboratory measurements validate the field measurements of Pakala et al. For the two specimens, it aims to link the noise characteristics (magnitude and frequency) with the specimen parameters (power supply and geometric dimensions) to predict the environments where wireless communications can be troublesome. By using different sets of this measured noise, we show that the statistical model of Middleton Class A can be used to model the impulsive noise in high-voltage substations better than the Gaussian model. We consider a cooperative multiple-input-multiple-output (MIMO) system to achieve the wireless sensor communication. This system uses recent MIMO techniques based on precoding like max-d min and P-OSM precoders. The MIMO precoder-based cooperative system is a potential candidate for energy saving in WSN since energy efficiency optimization is a very important critical issue. Since MIMO precoders are with Gaussian noise assumption, we evaluate the performance of several MIMO precoders in the presence of impulsive noise using estimated parameters from the measured noise.
Abstract-The installation of wireless technologies in power substations requires characterizing the impulsive noise produced by the high-voltage equipment. Substation impulsive noise might interfere with classic wireless communications and none of the existing models can reliably represent this noise in wide band. Previous studies have shown that impulsive noise is characterized by series of damped oscillations with the amplitude, the duration and the occurrence times of the impulses that are random. All these characteristics make this noise time-correlated and the partitioned Markov chain remains an efficient model that can ensure the correlation between the samples. In this study, we propose to design a partitioned Markov chain to generate an impulsive noise that is similar to the noise measured in existing substations, in time and frequency domains. We configure our Markov chain to produce the impulses with the damped oscillation effect, then, we determine the probability transition matrix and the distribution of each state of the Markov chain. Finally, we generate noise samples and we study the distribution of the impulsive noise characteristics. Our Markov chain model can replicate the correlation between the measured noise samples; also the distributions of the noise characteristics are similar in the simulations and the measurements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.