Bu çalışmada farklı enlemlerde seçilen üç farklı Uluslararası GNSS Servisi (IGS) istasyonunun ardışık 15 günlük GPS/Galileo gözlem verileri kullanılmış, elde edilen bu gözlemler, hem geleneksel-PPP hem de PPP-AR teknikleri kullanılarak statik modda değerlendirilmiştir. Kısa ve uzun ölçü süresinin yöntemler üzerindeki etkisini değerlendirmek için, üç farklı istasyondan elde edilen gözlem dosyaları 0.75, 1, 1.5, 2, 3, 4 ve 24 saatlik verilere ayrılmış, Galileo uydu gözlemlerinin GPS uydu gözlemlerine katkısını incelemek için PPP ve PPP-AR yöntemleri sadece-GPS ve GPS/Galileo uydu kombinasyonları açısından da incelenmiştir. Sonuçlar gözlem sürelerinin artması ile PPP yönteminde konum doğruluğunun arttığını ve PPP-AR tekniğinde ise faz başlangıç belirsizliğinin yanlış değere sabitlenme riskini azalttığını göstermiştir. Çalışmanın bulguları, PPP ve PPP-AR tekniklerinde Galileo uydu sisteminin GPS gözlemlerine dahil edilmesiyle konum doğruluğunun geliştiğini, PPP ve PPP-AR yöntemlerinin birbirleriyle karşılaştırıldıklarında ise PPP-AR yönteminin konum doğruluğunun genellikle tüm ölçü sürelerinde PPP yönteminden daha iyi çıktığı açıkça ifade edilmektedir.
Nowadays, with the developments in GNSS (Global Navigation Satellite System) technology, the data storage and data processing capacity of GPS (Global Positioning System) receivers has been gradually increased. This situation is widely used in the detection and monitoring of horizontal and vertical vibrations that occur in the structure when high temporal resolution geodetic GPS receivers are under the influence of dynamic loads such as earth crust motions, wind load, traffic load, which affect man-made engineering structures. In the study, RT DF-PPP (Real Time Dual Frequency-Precise Point Positioning) method was applied together with a GPS sensor with a sampling interval of 20 Hz, using a steel bar mounted on a steel tree model designed as a structure model, and a steel bar on which different sensors can be integrated and can provide simulation of vertical motions in detecting vertical motions occurring in structures. To evaluate the performance of the method used and to test the performance of capturing vertical displacements, the DF-RP (Dual Frequency-Relative Positioning) method was taken as reference and the results were compared with the PP-PPP (Post Process-PPP) method using the IGS-Final (International GNSS Service-Final) product. When the results are compared with the RP and PP-PPP solutions in the frequency domain of vertical motions as a result of harmonic oscillations of the high-rate RT-PPP method, it has been seen that the amplitudes and frequencies are compatible with each other. Therefore, dynamic motions that occur as a result of natural events such as earthquakes, tsunamis, landslides and volcanic eruptions can be instantly and reliably monitored and detected by the high-rate RT-PPP method. When the results were evaluated in the time domain, an improvement was observed in the RMSE (Root Mean Square Error) and maximum values of RT-PPP and PP-PPP methods according to RP after filtering. When the statistical results are examined, vertical harmonic motions of the solutions made by using both RT-PPP and PP-PPP methods can be detected with accuracy below centimeters. These results clearly show that it can detect vertical dynamic motions in engineering structures such as bridges, skyscrapers and viaducts with RT-PPP method to evaluate. Thus, by detecting the effects of dynamic motions occurring in the structure on the health of the structure, a safe environment will be provided by making a rapid hazard assessment for life safety.
Thanks to advances in receiver and software technology, the high-rate GPS (Global Positioning System) technique has become very important in monitoring the dynamic behavior of man-made structures in both real-time and post-missions. Real-time monitoring of the changes in the behavior of structures due to effects such as natural disasters, wind effect, traffic loading is critical in order to take precautions in time. In this study, the performance of the Real-Time Single Frequency Precision Point Positioning (RT SF-PPP) method based on IGS (International GNSS Service) RTS (real-time stream) products to capture the behavior of dynamic motions was evaluated. The performance of the SF RT-PPP method to detect dynamic behaviors was evaluated based on 20 Hz single frequency GPS observations obtained from shake table experiments, including 10 mm amplitude and different oscillation frequencies including 0.1, 0.6, 1.0, 2.0 and 3.0 Hz. RT SF-PPP results were compared with reference LVDT (Linear Variable Differential Transformer) and relative (or double difference) GPS positioning both frequency and time domain. Results show that the high-rate RT SF-PPP method can capture the frequencies and amplitudes of harmonic motions and it is comparable to LVDT and Relative GPS positioning solutions. These results show that the high-rate RT SF-PPP method can monitor earthquake-induced real-time vibration frequencies and amplitudes, which is especially important for early warning systems.
Yeryüzünde meydana gelen dinamik hareketlerin tespit edilmesinde GNSS (Global Navigation Satellite System) sensörüne dayalı birçok konum belirleme yöntemi (Bağıl Kinematik, Gerçek Zamanlı Kinematik (RTK), Hassas Nokta Konumlama (PPP), Gerçek Zamanlı (RT)-PPP vb.) kullanılmıştır. Kullanılan bu yöntemler ikinci bir GNSS alıcısı, internet bağlantısı, uydu yörünge ve saat düzeltme bilgisi gibi harici parametreler gerektirir. Bu çalışmada herhangi bir harici parametreye ihtiyaç duymadan gerçek zamanlı (Real-Time) dinamik hareketleri doğrudan yakalayabilen VADASE (Variometric Approach for Displacement Analysis Stand-Alone Engine) yaklaşımının düşey yönlü dinamik davranışları belirleyebilme yeteneği incelenmiştir. Çoklu-GNSS gözlemlerine dayalı bu yöntem, zaman ve frekans alanında bağıl konum belirleme (RP) yöntemi referans alınarak PPP yöntemi ile karşılaştırılmıştır. Sonuçlara bakıldığında düşey dinamik hareketlerin baskın frekans değerlerinin üç yöntem için de aynı olduğu görülmüştür. Baskın frekansa karşılık gelen genlik değerlerinde ise deneylerde referans alınan RP yöntemine göre RT-VADASE yönteminde 1.6 mm ila 3.2 mm arasında değişmekteyken PPP yönteminde bu farklılık 1.1 mm ila 1.6 mm arasında değişmektedir. Ayrıca zaman alanında tüm deney durumlarına incelendiğinde RT-VADASE yönteminin PP-PPP yöntemine göre KOH değerleri arasında milimetre düzeyinde (1-2mm) küçük farklılık bulunmaktadır. Sonuçlar, RT-VADASE yaklaşımının anlık olarak düşey dinamik hareketleri doğru ve güvenilir bir şekilde tespit edebileceğini göstermektedir. Bununla birlikte, RT-VADASE yöntemi deprem, rüzgâr, trafik yükü gibi dinamik yüklerin, yapıda meydana getirebileceği etkiyi anlık olarak tespit etmek ve yapı sağlığını tehdit edebilecek durumlarda yapının hızlı tehlike değerlendirilmesi yapılarak insan hayatını tehlikeye düşürecek durumlarda erken uyarı sistemine entegre bir sensör olarak kullanılabileceği gösterilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.