It is now more popular to use basalt fibers in the engineering programs to reinforce the crack resistance of asphalt mixtures. However, research concerning the impact of the basalt fiber diameter on the macro performance of AC-13 mixtures is very limited. Therefore, in this paper, basalt fibers with three diameters, including 7, 13 and 25 μm, were selected to research the influences of fiber diameter on the crack resistance of asphalt mixtures. Different types of crack tests, such as the low temperature trabecular bending test (LTTB), the indirect tensile asphalt cracking test (IDEAL-CT), and the semi-circular bend test (SCB), were conducted to reveal the crack resistance of AC-13 mixtures. The entire cracking process was recorded through the digital image correlation (DIC) technique, and the displacement cloud pictures, strain, average crack propagation rate (V) and fracture toughness (FT) indicators were used to evaluate the crack inhibition action of the fiber diameter on the mixture. The results showed that the incorporation of basalt fiber substantially improved the crack resistance, slowed down the increase of the displacement, and delayed the fracture time. Basalt fiber with a diameter of 7 μm presented the best enhancement capability on the crack resistance of the AC-13 mixture. The flexibility index (FI) of the SCB test showed a good correlation with V and FT values of DIC test results, respectively. These findings provide theoretical advice for the popularization and engineering application of basalt fibers in asphalt pavement.
To clarify the influence of fiber type on the long-term performance of stone mastic asphalt (SMA), this paper used basalt fiber (BF) and lignin fiber (LF) to modify SMA-13 (SMA with aggregate nominal maximum particle size of 13.2 mm) asphalt mixture. The pavement performances (high-temperature performance, cracking resistance at low and medium temperature, and water stability) of the two kinds of fiber-reinforced SMA-13 were checked under different aging degrees (unaged, short-term aged and long-term aged), scanning electron microscope (SEM) test was conducted to explain the strengthening mechanism of the fibers. Fourier transform infrared spectrometry (FTIR) was used to analyze the changes in the chemical composition of asphalt after aging. The results of the wheel tracking test and uniaxial penetration test showed that the high-temperature performance of the BFSMA-13 (defined as the SMA-13 containing BF) is better than that of the LFSMA-13 (defined as the SMA-13 containing LF) at different aging degrees. The high-temperature performance of BFSMA-13 increases with the increase of the aging degree, while the aging process decreases the high-temperature property of LFSMA-13. The results of the three-point bending test and semi-circular bending (SCB) proved that BFSMA-13 is more capable of deformation and less prone to cracking at low and medium temperatures. The results of the immersion Marshal test indicated that BF can better improve the strength and the water stability of the SMA-13 mixture than LF. The SEM images showed that basalt fibers form a solid three-dimensional network structure in the mixture which could contribute to the strengthening of the mixture. The results of infrared spectroscopy analysis showed that styrene–butadiene–styrene (SBS) degrades during asphalt mixture aging, and that the chemical composition of asphalt changes more after aging in LFSMA-13 than in BFSMA-13. The conclusions of this study help toward further understanding of the performance changes of the SMA-13 mixture during its service life and to guide the selection of fiber additives for SMA-13 mixtures.
The paper aims to investigate the influence of basalt fiber (BF) on the crack resistance of the asphalt mixture and conduct a mechanical analysis. First, two typical asphalt mixtures, namely AC-13 and SMA-13, were designed. The impact of BF on the mixture design results was analyzed. Then, several macroscopic tests, namely the four-point bending test, indirect tensile test, and semicircular bending test (SCB), were conducted to assess the effect of BF on the cracking resistance of asphalt mixtures. Finally, the influence of BF on the cracking resistance of asphalt mixtures was analyzed based on an environmental scanning electron microscope (ESEM) observation. The results show that: (1) BF increases the optimal asphalt content of AC13 and decreases the optimal asphalt content of SMA-13, which is caused by the different asphalt-absorption capacity of BF and lignin fiber (LF). (2) BF enhances both the fatigue crack resistance and temperature crack resistance of asphalt mixtures. The enhancement on the SMA-13 is more significant, indicating that the enhancement of BF on asphalt mixtures is related to the type of aggregate gradation. (3) BFs in the asphalt mixture lap each other to form a spatial network structure. Such structure can effectively improve the crack resistance of the mixture by dispersing the load stress and preventing the flow of asphalt mastic. The study results provide an effective method to design crack-resistant asphalt mixtures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.