No abstract

The present work deals with the fabrication of novel poly(vinylidene fluoride) (PVDF)/Multi-wall Carbon Nanotubes (MWCNT)/Polypyrrole (PPy) ultrafiltration membrane by phase inversion technique for the removal of crude oil from refinery wastewater. In situ polymerization of pyrrole with different concentrations of MWCNT ranging from 0.025 wt.% to 0.3 wt.% in PVDF prepared solutions. Measurement of permeability, porosity, contact angle, tensile strength, zeta potential, rejection studies and morphological characterization by scanning electron microscopy (SEM) were conducted. The results showed that membrane with (0.05% MWCNT) concentration had the highest permeability flux (850 LMH/bar), about 17 folds improvement of permeability compared to pristine PVDF membrane. Moreover, membrane rejection of crude oil reached about 99.9%. The excellent performance of this nanocomposite membrane suggests that novel PVDF modification with polypyrrole had a considerable effect on permeability with high potential for use in the treatment of oily wastewater in the refinery industry.

The objective of this work is to study the separation performance of a tubular TiO2 ceramic nanofiltration membrane operate at low pressures (2 bar), and the parameters that would affect the membrane rejection behavior, such as the ions valences, ions type, transmembrane pressure (TMP) values, and membrane zeta-potential. The membrane was used to desalinate water samples containing NaCl, NaNO3, and Na2SO4 in single and tertiary salts solution. The rejection of ions solutions took the following trend: R of sulphate (SO4 2- ) > R of nitrate (NO3 1- )>R of chloride (Cl1- )>R of sodium (Na1+). The highest SO4 2- rejection was about 62%, the highest NO3 1- rejection was about 51%, the highest Cl1- rejection was about 42%, and highest Na1+ rejection was about 37%.

No abstract

The main goal of this review is to collect and analyze the recently published research concerning the conventional and sustainable treatment processes for olive mill wastewater (OMW). In the conventional treatment processes, it is noticed that the main objective is to meet the environmental regulations for remediated wastewater without considering the economical values of its valuable constituents such as polyphenols. These substances have many important environmental values and could be used in many vital applications. Conversely, sustainable treatment processes aim to recover the valuable constituents through different processes and then treat the residual wastewater. Both approaches’ operational and design parameters were analyzed to generalize their advantages and possible applications. A valorization-treatment approach for OMW is expected to make it a sustainable resource for ingredients of high economical value that could lead to a profitable business. In addition, inclusion of a recovery process will detoxify the residual OMW, simplify its management treatment, and allow the possible reuse of the vast amounts of processed water. In a nutshell, the proposed approach led to zero waste with a closed water cycle development.

Background and Objectives: On March 11, the World Health Organization stated coronavirus disease 2019 (COVID-19) was a global pandemic; the rapid and extended spread of the COVID-19 pandemic has become a significant cause of concern for face-to-face university study. This study investigated the knowledge and awareness of chemical engineering students in Al-Balqa Applied University (BAU) in Jordan about respiratory protective measures against COVID-19.Materials and Methods: A cross-sectional study was developed using a multi-stage random sampling technique conducted from April 21–28, 2020. The data were collected through an online questionnaire distributed to BAU's chemical engineering students, with 179 responders completed the survey correctly. The data were analyzed statistically using the SPSS program. The questionnaire consisted of two parts: the first measured the student's general knowledge about the COVID-19 pandemic, while the second focused on the respiratory protection methods against COVID-19; it was structured to assess the student's knowledge about the suitable types of masks and respirators used in COVID-19 prevention, their detailed mechanism of action and filtration process type, their production materials, and finally how the student's knowledge affects choosing a proper preventive method.Results: The study found moderate awareness among engineering students about COVID-19 causative agent, effective preventive masks/respirators used, and the mask's viral blockage mechanisms. A total of 89 respondents (49.7%) pointed to the correct best protective mask, i.e., N95 mask. On the other hand, 119 respondents (66.5%) believed that a surgical mask is the best protective mask. The study also showed differences in knowledge between different academic years; the knowledge about respirators, masks, and their action mechanism among senior students in the last three academic years was better than the younger students with a P-value of 0.047 for knowledge about respirator used for protection against coronavirus disease and the P-value of 0.028 for knowledge of the comparisons between the N95 and surgical mask. On the other hand, the study showed a lack of awareness of the most suitable mask types used in pandemics and the appropriate use method.Conclusions: The study found that chemical engineering students in Al-Balqa university were moderately knowledgeable regarding COVID-19 respiratory preventive methods; these results provided an overview of each student's community's knowledge level. Therefore, efforts are needed to improve public awareness through comprehensive educational campaigns to increase students' knowledge, attitude, and practice.

No abstract

In this study, the potential of a low-cost bio-adsorbent, taken directly from Date Palm Trunk Fibers (DPTF) agricultural wastes, for cadmium ions removal from wastewaters is examined. The performances of this adsorbent are evaluated by building breakthrough curves at different bed heights and flow rates while keeping other parameters, such as the initial feed concentration, pH, and particle size, constant. The results indicate that the maximum cadmium adsorption capacity of DTPF can be obtained from the Thomas model as 51.5 mg/g with the most extended mass transfer zone of 83 min at the lowest flow rate at 5 ml/min. The saturation concentrations (N O ) and the rate constant (k ab ) obtained from the BDST (bed depth service time) model are 7022.16 mg/l and 0.0536 l/mg.min, respectively. Using the Yon-Nelsen Model, it is found that operating at a lower flow rate leads to a larger value of the elapsed needed time to reach a 50% breakthrough. The Wolborska model indicates that the bed capacity increases with decreasing the flow rate, and the adsorbent can achieve a greater external mass transfer kinetic coefficient (2.271/min) at a higher flow rate.