The saw-tooth chip formation is one of the main machining characteristics in cutting of titanium alloys. The numerical simulation of saw-tooth chip formation, however, is still not accurate, since most of these numerical simulation models are based on traditional finite element method, which have difficulties in handling extremely large deformation that always occurs in the cutting process. Furthermore, these models adopt the Johnson–Cook damage constitutive law that is implemented in commercial codes such as ABAQUS® and LS-DYNA® to describe the dynamic mechanical properties of material, but Johnson–Cook damage constitutive law cannot account for the material of behavior due to strain softening and the dynamic recrystallization mechanism that occurs in the cutting process of Ti–6Al–4. Therefore, this work introduces a material constitutive model named hyperbolic tangent (TANH) and an improved smooth particle hydrodynamics method, and then develops an improved cutting model for Ti–6Al–4V titanium alloy through our in-house code to predict saw-tooth chip morphology and cutting forces. When compared to the experiments and Johnson–Cook damage model, the improved cutting model better explains and predicts the shear localized saw-tooth chip deformation as well as cutting forces.
Laser powder bed fusion (LPBF) has been increasingly used in the fabrication of dense metallic structures. However, the corrosion related properties of LPBF alloys, in particular environment-assisted cracking, such as corrosion fatigue properties, are not well understood. In this study, the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution have been investigated using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing. The LPBF 316L SSs demonstrated significantly improved corrosion properties compared to conventionally manufactured 316L, as reflected by the increased pitting and repassivation potentials, as well as retarded crack initiation. However, the printing parameters did not strongly affect the pitting potentials. LPBF samples also demonstrated enhanced capabilities of repassivation during the fatigue crack propagation. The unique microstructural features introduced during the printing process are discussed. The improved corrosion and corrosion fatigue properties are attributed to the presence of columnar/cellular subgrains formed by dislocation networks that serve as high diffusion paths to transport anti-corrosion elements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.