The Finite Element Method (FEM) can be used to analyze very complex geometries, such as the pelvis, and complicated constitutive behaviors, such as the heterogeneous, nonlinear, and anisotropic behavior of bone tissue or the noncompression, nonbending character of ligaments. Here, FEM was used to simulate the mechanical ability of several external and internal fixations that stabilize pelvic ring disruptions. A customized pelvic fracture analysis was performed by computer simulation to determine the best fixation method for each individual treatment. The stability of open-book fractures with external fixations at either the iliac crests or the pelvic equator was similar, and increased greatly when they were used in combination. However, external fixations did not effectively stabilize rotationally and vertically unstable fractures. Adequate stabilization was only achieved using an internal pubis fixation with two sacroiliac screws.
Dislocation is a serious complication in total hip replacement (THR). An inadequate range of movement (ROM) can lead to impingement of the prosthesis neck on the acetabular cup; furthermore, the initiation of subluxation and dislocation may occur. The objective of this study was to generate a parametric three-dimensional finite element (FE) model capable of predicting the dislocation stability for various positions of the prosthetic head, neck, and cup under various activities. Three femoral head sizes (28, 32, and 36 mm) were simulated. Nine acetabular placement positions (abduction angles of 25°, 40° and 60° combined with anteversion angles of 0°, 15° and 25°) were analyzed. The ROM and maximum resisting moment (RM) until dislocation were evaluated based on the stress distribution in the acetabulum component. The analysis allowed for the definition of a “safe zone” of movement for impingement and dislocation avoidance in THR: an abduction angle of 40°–60° and anteversion angle of 15°–25°. It is especially critical that the anteversion angle does not fall to 10°–15°. The sequence of the RM is a valid parameter for describing dislocation stability in FE studies.
The main objective of this work is the evaluation, by means of the finite element method (FEM) of the mechanical stability and long-term microstructural modifications in bone induced to three different kinds of fractures of the distal femur by three types of implants: the Condyle Plate, the less invasive stabilization system plate (LISS) and the distal femur nail (DFN). The displacement and the stress distributions both in bone and implants and the internal bone remodelling process after fracture and fixation are obtained and analysed by computational simulation. The main conclusions of this work are that distal femoral fractures can be treated correctly with the Condyle Plate, the LISS plate and the DFN. The stresses both in LISS and DFN implant are high especially around the screws. When respect to remodelling, the LISS produces an important resorption in the fractured region, while the other two implants do not strongly modify bone tissue microstructure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.