No abstract

Mott-Schottky plots and photoelectrochemical measurements were made on films formed at different potentials on AISI 304 stainless steel in a borate/boric acid solution, pH 9.2. The results allowed the determination of the semiconductive properties and band structure of the films, which account for the existence of two kinds of films depending on the formation potential. For potentials below 0 V (SCE), the results point out for a film with an inverse spinel structure constituted by Cr-substituted magnetite with two donor levels. Above 0 V only one donor level is detected, which should be Fe 2 § on tetrahedral sites.

Synopsis Although aqueous dispersions of lipids in the form of particles having a lamellar structure (liposomes) are already known as excellent vehicles for pharmaceutical substances, their usefulness in cosmetic formulations has not been demonstrated. The present work shows the advantages obtained by application of such systems to the skin, and in particular the use of non-ionic lipids in aqueous dispersions. Thus, in comparison with classical formulations such as emulsions, these systems exhibit lower toxicity and permit closer control of the availability of active substances at the stratum corneum. As examples, compositions suitable for skin moisturising and for tanning products are presented.

Adhesion of microorganisms to surfaces in marine environments leads to biofouling. The deleterious effects of biofilm growth in the marine environment are numerous and include energy losses due to increased fluid frictional resistance or to increased heat transfer resistance, the risk of corrosion induced by microorganisms, loss of optical properties, and quality control and safety problems. Antifouling agents are generally used to protect surfaces from such a biofilm. These agents are toxic and can be persistent, causing harmful environmental and ecological effects. Moreover, the use of biocides and regular cleaning considerably increase the maintenance costs of marine industries. An improved knowledge of biofilm adhesion mechanisms is needed for the development of an alternative approach to the currently used antifouling agents. The aim of this study is to characterise the chemical composition of the molecules first interacting with stainless steel during the period immediately following immersion in natural seawater and to elucidate the kinetics of the adsorbtion process. Proteins are shown to adhere very rapidly, closely followed by carbohydrates. The distribution on the surface of organic molecules is also examined. The adsorbate on the surface is not a continuous film but a heterogeneous deposit, whose average thickness varies widely. The cleaning procedures used affect the adsorption kinetics. In particular, cleaning with hexane results in slower adsorption of nitrogen-containing species than does cleaning in acetone.

No abstract

No abstract

No abstract

No abstract