Adhesion of microorganisms to surfaces in marine environments leads to biofouling. The deleterious effects of biofilm growth in the marine environment are numerous and include energy losses due to increased fluid frictional resistance or to increased heat transfer resistance, the risk of corrosion induced by microorganisms, loss of optical properties, and quality control and safety problems. Antifouling agents are generally used to protect surfaces from such a biofilm. These agents are toxic and can be persistent, causing harmful environmental and ecological effects. Moreover, the use of biocides and regular cleaning considerably increase the maintenance costs of marine industries. An improved knowledge of biofilm adhesion mechanisms is needed for the development of an alternative approach to the currently used antifouling agents. The aim of this study is to characterise the chemical composition of the molecules first interacting with stainless steel during the period immediately following immersion in natural seawater and to elucidate the kinetics of the adsorbtion process. Proteins are shown to adhere very rapidly, closely followed by carbohydrates. The distribution on the surface of organic molecules is also examined. The adsorbate on the surface is not a continuous film but a heterogeneous deposit, whose average thickness varies widely. The cleaning procedures used affect the adsorption kinetics. In particular, cleaning with hexane results in slower adsorption of nitrogen-containing species than does cleaning in acetone.
The conidiospores of the white rot basidiomycete Phanerochaete chrysosporium tend to aggregate during swelling and germination in agitated liquid medium; as time passes, the initial aggregates tend to associate together and to capture conidiospores that remain isolated. The surface chemical compositions of the conidiospores and of developed hyphae were analyzed by X-ray photoelectron spectroscopy. The data were interpreted by modelling the surface in terms of proteins, polysaccharides and hydrocarbonlike compounds. The surface molecular composition of the dormant conidiospores was estimated to be about 45% proteins, 20% carbohydrates, and 35% hydrocarbonlike compounds. There was an increase in the polysaccharide content during germination. Later, when the hyphae were developed, the polysaccharide content became still higher, and the protein content dropped. The initial step of aggregation is attributed to polysaccharide bridging; its occurrence cannot be explained by a change of the overall hydrophobicity or electrical properties of the conidiospores.
Four different thermodynamic approaches were compared on their usefulness to predict correctly the adhesion of two fouling microogranisms from dairy processing to various solid substrata. The surface free energies of the interacting surfaces were derived from measured contact angles according to: 1. The equation of state; 2. The geometric-mean equation using dispersion and polar components neglecting spreading pressures; 3. The geometric-mean equation using dispersion and polar components while accounting for spreading pressures; and 4. The Lifshitz-van der Waals/Acid-Base approach. All approaches yielded similar surface free energies for the low energy surfaces. Application of approach 1 with different liquids did not give consistent values for the high surface free energy substrata. The dispersion or Lifshiftz-van der Waals components were nearly equal for approaches 2, 3, and 4; however, the polar or acid-base components differed greatly according to the approach followed. Approaches 1 and 2 correctly predicted that adhesion should occur, although the trend with respect to the various solid substrata was opposite the one experimentally observed, as was also the trend predicted by approach 4. Only approach 3 correctly predicted the observed bacterial adhesion with respect to the various solid substrata. In approach 3 and 4, adhesion was frequently found, despite a positive free energy of adhesion. This was attributed to either possible local attractive electrostatic interactions, inadequate weighing of surface free energy components in the calculation of free energies of adhesion, or to additional forces arising from structured interfacial water.
Immobilization of conidiospores of Phanerochaete chrysosporium by adhesion was investigated in static and flow conditions on flat and on porous supports. Reducing the electrostatic repulsion between the spores and the support by adsorption of polycations on the support allows a better adhesion efficiency and a higher density of adhering spores and does not affect germination and growth. Formation of spore aggregates either in the suspension (high ionic strength) or on the support tends to decrease the surface coverage and to give an inhomogeneous distribution of adhering spores due to detachment of aggregates. The density of spores adhering from a flowing suspension is lower as compared with static conditions and does not exceed about 2% of surface coverage; this is due to the influence of tangential forces, to the short contact time with the surface, and to perturbation of the hydrodynamics along the surface by the previously immobilized spores. Obtaining a high coverage of the support by immobilized spores requires the absence of a tangential motion. (c) 1995 John Wiley & Sons, Inc.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.