Nowadays in order to meet the increase in power demands and to reduce the global warming, renewable energy sources based system is used. Out of the various renewable energy sources, solar energy is the main alternative. But, compared to other sources, the solar panel system converts only 30–40% of solar irradiation into electrical energy. In order to get maximum output from a PV panel system, an extensive research has been underway for long time so as to access the performance of PV system and to investigate the various issues related to the use of solar PV system effectively. This paper therefore presents different types of PV panel systems, maximum power point tracking control algorithms, power electronic converters usage with control aspects, various controllers, filters to reduce harmonic content, and usage of battery system for PV system. Attempts have been made to highlight the current and future issues involved in the development of PV system with improved performance. A list of 185 research publications on this is appended for reference.

No abstract

No abstract

This paper develops the photovoltaic bidirectional inverter (BI) operated in dual mode for the seamless power transfer to DC and AC loads. Normal photovoltaic (PV) output voltage is fed to boost converter, but in space application, boost converter is not so preferable. To overcome this, buck and boost converters are proposed in this paper. Duty cycle to this converter is provided with the help of the outcome of the maximum power point tracking (MPPT) controller. This can be implemented by using perturbation and observation method. The MPPT will operate the switch between buck and boost modes. When the output voltage of a PV array is close to the dc bus voltage, then the bidirectional inverter can fulfill both rectification and grid connected mode. To control the power flow between dc bus and ac grid, a dc distribution system is used to regulate the dc bus voltage to a convinced level. Moreover, the bidirectional inverter must fulfill grid connection (sell power) and rectification (buy power) with power factor correction (PFC) to control the power flow between dc bus and ac grid. The simulations and hardware experimental results of a 2.5 kVA circuit are presented to validate the performance of the proposed dual-mode seamless power transfer.

No abstract