Measurements of beam stability for mid-infrared (IR)-emitting quantum cascade lasers (QCLs) are important for applications that require the beam to travel through air to remote targets, such as free-space communication links. We report beam-quality measurement results of narrow-ridge, 4.6 µm-emitting buried-heterostructure (BH) QCLs fabricated using ICP etching and HVPE regrowth. Beam-quality measurements under QCW operation exhibit M2 < 1.2 up to 1 W for ∼5 µm-wide ridges. 5 µm-wide devices display some small degree of centroid motion with increasing output power (< 0.125 mrad), which corresponds to a targeting error of ∼1.25 cm over a distance of 100 m.
Thermal profiles of a single-element quantum cascade laser (QCL) and a five-element QCL array at different bias currents, under quasi-continuous-wave (QCW) conditions, are obtained using the charge-coupled device (CCD)-based thermoreflectance imaging technique. Peak temperature changes of 55 K and 105 K are measured on the single-element QCL (operating at 1.2 A) and the central element of the QCL array (operating at 4.2 A), respectively. The average facet temperature of the single QCL device shows a linear relationship with the dissipated power, indicating an effective thermal resistance of Rth = 3.0 ± 0.2 K/W (7%) for the device. The thermal transient behavior of the single QCL device, in response to a 35 μs-wide heating pulse, is also measured. From the transient curve, an effective thermal time constant of τth = 9.5 ± 0.4 μs (4%) is obtained. Experimental results are compared to the results obtained from heat-transfer models for both the single-element and array devices. Thermal profiles show a thermal lensing effect at the facet of the single-element QCL. In the array device, a more pronounced heating is observed at the center of the device while the temperature gradually decreases away from the central element.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.