Magnetic stimulation from cortically implantable microcoils can activate neuronal circuits with high selectivity and reliability.

Super-resolution imaging beyond Abbe's diffraction limit can be achieved by utilizing an optical medium or "metamaterial" that can either amplify or transport the decaying near-field evanescent waves that carry subwavelength features of objects. Earlier approaches at optical frequencies mostly utilized the amplification of evanescent waves in thin metallic films or metal-dielectric multilayers, but were restricted to very small thicknesses ͑Ӷ , wavelength͒ and accordingly short object-image distances, due to losses in the material. Here, we present an experimental demonstration of super-resolution imaging by a low-loss three-dimensional metamaterial nanolens consisting of aligned gold nanowires embedded in a porous alumina matrix. This composite medium possesses strongly anisotropic optical properties with negative permittivity in the nanowire axis direction, which enables the transport of both far-field and near-field components with low-loss over significant distances ͑Ͼ6 ͒, and over a broad spectral range. We demonstrate the imaging of large objects, having subwavelength features, with a resolution of at least / 4 at near-infrared wavelengths. The results are in good agreement with a theoretical model of wave propagation in anisotropic media.

The first electromagnetic metamaterials (EM3) produced by microfabrication are reported. They are based on the rod-split-ring-resonator design as proposed by Pendry et al. [IEEE Trans. Microwave Theory Tech. 47, 2075 (1999)] and experimentally confirmed by Smith et al. [Phys. Rev. Lett. 84, 4184 (2000)] in the GHz frequency range. Numerical simulation and experimental results from far infrared (FIR) transmission spectroscopy support the conclusion that the microfabricated composite material is EM3 in the range 1-2.7 THz. This extends the frequency range in which EM3 are available by about 3 orders of magnitude well into the FIR, thereby widely opening up opportunities to verify the unusual physical implications on electromagnetic theory as well as to build novel electromagnetic and optical devices.

Nanoporous oxide coatings, such as anodic aluminum oxide (AAO), are utilized as drug‐release platforms for up to weeks of delivery (see picture for doxorubicin, Dox). A burst‐release phase is followed by sustained release, the kinetics of which is described by an activated surface‐density‐dependent desorption model.

The framework for designing a slow light waveguide structure which operates in the GHz and up to THz frequencies is outlined. The design for the structure consists of a dielectric core layer cladded with negative permeability metamaterials. The parameter space for the metamaterial has been identified for the waveguide to stop light and the negative permeability is achieved by split‐ring resonator (SRR) metallic elements. A prototype structure operating at 8.5 GHz is proposed. Numerical simulations of electromagnetic waves interacting with SRRs have been performed to extract scattering parameters and a parameter retrieval method has been used to verify the designed window for negative permeability. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2705–2709, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24727

We demonstrate experimentally negative refraction by a photonic crystal prism and imaging of a point source by a photonic crystal slab at 1.5 microm wavelength. The photonic crystal structures were nanofabricated in a InGaAsP/InP heterostructure platform, and optical characterization was performed using a near-field scanning optical microscope. By designing a suitable lens surface termination, an image spot size of 0.12lambda2 was achieved, demonstrating superlens imaging with subwavelength resolution well below Abbe's diffraction limit (0.5lambda2).

Presently existing THz electromagnetic metamaterials were mostly produced as planar single layer structures, either deposited on a substrate or embedded in a polymer matrix, and patterned by a primary pattern generator such as an electron beam writer or a laser writer. Some attempts to produce more voluminous structures were made using ultraviolet photolithography and a stacking process. We explore deep x-ray lithography and subsequent stacking of chips to fabricate, with good yield, substantial quantities of rod-split-ring structures that come closer to three dimensions than before. Samples were characterized layer-by-layer using Fourier transform interferometry in the far infrared.

We report an experimental observation of slow-light in the GHz microwave regime utilizing the mechanism of the degeneracy of forward and backward waves in a planar waveguide consisting of a dielectric core cladded by single-negative metamaterial. The metamaterial cladding consists of periodic arrays of metallic split-ring resonators, exhibiting an effective negative permeability. Group delay dispersions obtained from pulsed measurements are in complete agreement with theoretical predictions.