Nanocomposite assemblies of poly(3,4-ethylenedioxythiophene) (PEDOT), embedded with (a) fluoro alkyl phosphate based ionic liquid functionalized graphene (ILFG) and (b) reduced graphene oxide (RGO) prepared from a modified Hummers' method, have been synthesized. Defect free graphene nanosheets within the size of a few nanometers were achieved in the PEDOT-ILFG nanocomposite. In contrast, structures comprising graphene oxide wrinkles interspersed with the amorphous polymer were obtained in the PEDOT-RGO nanocomposite. X-ray photoelectron spectroscopy showed that neat ILFG was considerably less oxidized as compared to the neat RGO, which ratified the superiority of the ionic liquid functionalization strategy over the conventional chemical approach, for exfoliating graphite. Substantially higher electrochemical activity, improved ionic/electronic conductivity, much faster switching rates, and an almost ballistic enhancement in the electrochromic coloration efficiency attained for the PEDOT-ILFG nanocomposite in comparison to PEDOT-RGO film were irrefutable proofs that demonstrated the ability of the ionic liquid to not only fortify the structure of graphene but also facilitate charge transport through the bulk of the film, by providing less impeded pathways. Since PEDOT-ILFG/-RGO nanocomposites of good uniformity have been achieved, this, to some extent, addresses the challenge associated with the processing of graphene based high performance materials for practical applications.

Graphene nanosheets were prepared using a modified Hummer's method, and Au-graphene nanocomposites were fabricated by in situ reduction of a gold salt. The as-produced graphene was characterized by X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy (HR-TEM). In particular, the HR-TEM demonstrated the layered crystallites of graphene with fringe spacing of about 0.32 nm in individual sheets and the ultrafine facetted structure of about 20 to 50 nm of Au particles in graphene composite. Scanning helium ion microscopy (HIM) technique was employed to demonstrate direct write deposition on graphene by lettering with gaps down to 7 nm within the chamber of the microscope. Bare graphene and graphene-gold nanocomposites were further characterized in terms of their composition and optical and electrical properties.

No abstract

No abstract

No abstract