No abstract

No abstract

The composite fibrous films were developed from zein and poly(lactic acid) (PLA) by incorporating carvacrol at three different concentrations (5, 10 and 20%) using electrospinning. The morphology and size of fibers obtained from both zein and PLA were affected by the level of the incorporated carvacrol. The Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA) results showed that carvacrol was encapsulated in electrospun zein and PLA fibers. The antioxidant activity of carvacrol loaded zein fibers ranged from 62 to 75%, while antioxidant capacity of PLA fibers varied from 53 to 65% for 5e20% carvacrol content. The composite fibrous films showed a sustained diffusion controlled release behavior. Preliminary studies on whole wheat bread samples showed that carvacrol loaded electrospun zein and PLA fibers are able to preserve bread samples, indicating that they are good candidates for active food packaging applications to extend the shelf life of whole wheat bread.

Barley flour and barley flour-pomace (tomato, grape) blends were extruded through a co-rotating twin-screw extruder. The aim of the present study was to investigate the effects of die temperature, screw speed, and pomace level on water absorption index (WAI), water solubility index (WSI), degree of starch gelatinization, and in vitro starch digestibility using a response surface methodology. The selected extrudate samples were examined further using differential scanning calorimetry (DSC) and polarized light microscopy, respectively. The WAI of barley-pomace extrudates was affected by increasing pomace level. Temperature had significant effect on all types of extrudate but screw speed had significant linear effect only on barley and barley-grape pomace extrudates on degree of starch gelatinization. Although no gelatinization peak was detected, an endotherm was observed on all selected extrudates. In general, extrusion cooking significantly increased in vitro starch digestibility of extrudates. However, increasing level of both tomato and grape pomace led to reduction in starch digestibility.

The aim of this study was to determine the effects of extrusion processing variables on antioxidant activity (AA), total phenolic content (TP) and b-glucan content (BG) of extrudates. Products were prepared by extrusion cooking of barley flour, barley flour-tomato pomace and barley flour-grape pomace blends. Antioxidant activity as measured by the DPPH method was 43.17 ± 0.362, 27.57 ± 0.120 and 82.23 ± 0.785% while TPs, expressed as ferulic acid equivalents, were 5.29 ± 0.126, 4.66 ± 0.023 and 9.15 ± 0.015 mg g )1 dry sample in the extracts obtained from barley flour, tomato and grape pomaces, respectively. Extrusion cooking decreased AA and TP of barley, barley-tomato pomace and barley-grape pomace extrudates. Temperature and screw speed had significant (P < 0.05) effect on BGs of barley flour and barley-grape pomace extrudates. However, BG of tomato pomace blend extrudates had significantly (P < 0.05) influenced from pomace level only. Results indicated that the content of b-glucan is higher in barley flour than in extrudates of barley flour and pomace blends.

The rheological behavior of pomegranate juice (Punica granatum L.), prepared from fresh pomegranates, was studied as a function of solids concentration in the range 17.5–75°Brix at 10–55C, using a controlled stress rheometer. Concentration methods did not influence flow behavior. There were no significant differences (P > 0.05) between viscosity and activation energy values for the pomegranate juices concentrated by different methods. The juices exhibited Newtonian behavior regardless of the concentration method. The effect of temperature was described by an Arrhenius‐type equation with an activation energy in the range 5.34–32.2 kJ/mol depending on concentration. An exponential model described better the effect of the soluble solids on the viscosity and Eavalues. A simple equation was proposed for describing the combined effect of temperature and soluble solids content on the juice viscosity.

BACKGROUND: The nutritional profile of barley places it in a prime position for development of a new extruded-expanded snack food with health benefits. It was therefore the aim to investigate the effect of extrusion processing variables on system parameters (specific mechanical energy, die pressure and die melt temperature) and physical properties (expansion, bulk density, texture and color) of barley flour extrudates and to optimize processing conditions for production of extruded snack food from barley flour by response surface methodology.

No abstract