High surface area organic materials featuring both micro- and mesopores were synthesized under ionothermal conditions via the formation of polyaryltriazine networks. While the polytrimerization of nitriles in zinc chloride at 400 degrees C produces microporous polymers, higher reaction temperatures induce the formation of additional spherical mesopores with a narrow dispersity. The nitrogen-rich carbonaceous polymer materials thus obtained present surface areas and porosities up to 3300 m(2) g(-1) and 2.4 cm(3) g(-1), respectively. The key point of this synthesis relies on the occurrence of several high temperature polymerization reactions, where irreversible carbonization reactions coupled with the reversible trimerization of nitriles allow the reorganization of the dynamic triazine network. The ZnCl2 molten salt fulfills the requirement of a high temperature solvent, but is also required as catalyst. Thus, this dynamic polymerization system provides not only highly micro- and mesoporous materials, but also allows controlling the pore structure in amorphous organic materials.
pH-sensitive hydrogels play an important role in controlled drug release applications and have the potential to impact the management of wounds. In this study, we report the fabrication of novel carboxylated agarose/tannic acid hydrogel scaffolds cross-linked with zinc ions for the pH-controlled release of tannic acid. The resulting hydrogels exhibited negligible release of tannic acid at neutral and alkaline pH and sustained release at acidic pH, where they also displayed maximum swelling. The hydrogels also displayed favorable antibacterial and anti-inflammatory properties, and a lack of cytotoxicity toward 3T3 fibroblast cell lines. In simulated wound assays, significantly greater cell migration and proliferation was observed for cells exposed to tannic acid hydrogel extracts. In addition, the tannic acid hydrogels were able to suppress NO production in stimulated human macrophages in a concentration-dependent manner, indicating effective anti-inflammatory activity. Taken together, the cytocompatibility, antibacterial, and anti-inflammatory characteristics of these novel pH-sensitive hydrogels make them promising candidates for wound dressings.
Mechanical aspects of the cellular environment can influence cell function, and in this context hydrogels can serve as an instructive matrix. Here we report that physicochemical properties of hydrogels derived from polysaccharides (agarose, κ-carrageenan) having an α-helical backbone can be tailored by inducing a switch in the secondary structure from α-helix to β-sheet through carboxylation. This enables the gel modulus to be tuned over four orders of magnitude (G′ 6 Pa-3.6 × 10 4 Pa) independently of polymer concentration and molecular weight. Using carboxylated agarose gels as a screening platform, we demonstrate that soft-carboxylated agarose provides a unique environment for the polarization of endothelial cells in the presence of soluble and bound signals, which notably does not occur in fibrin and collagen gels. Furthermore, endothelial cells organize into freestanding lumens over 100 μm in length. The finding that a biomaterial can modulate soluble and bound signals provides impetus for exploring mechanobiology paradigms in regenerative therapies.
With the increasing growth of the algae industry and the development of algae biorefinery, there is a growing need for high-value applications of algae-extracted biopolymers. The utilization of such biopolymers in the biomedical field can be considered as one of the most attractive applications but is challenging to implement. Historically, polysaccharides extracted from seaweed have been used for a long time in biomedical research, for example, agarose gels for electrophoresis and bacterial culture. To overcome the current challenges in polysaccharides and help further the development of high-added-value applications, an overview of the entire polysaccharide journey from seaweed to biomedical applications is needed. This encompasses algae culture, extraction, chemistry, characterization, processing, and an understanding of the interactions of soft matter with living organisms. In this review, we present algae polysaccharides that intrinsically form hydrogels: alginate, carrageenan, ulvan, starch, agarose, porphyran, and (nano)cellulose and classify these by their gelation mechanisms. The focus of this review further lays on the culture and extraction strategies to obtain pure polysaccharides, their structure-properties relationships, the current advances in chemical backbone modifications, and how these modifications can be used to tune the polysaccharide properties. The available techniques to characterize each organization scale of a polysaccharide hydrogel are presented, and the impact on their interactions with biological systems is discussed. Finally, a perspective of the anticipated development of the whole field and how the further utilization of hydrogel-forming polysaccharides extracted from algae can revolutionize the current algae industry are suggested.
COMMUNICATION (1 of 7)© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Mechanically Tunable Bioink for 3D Bioprinting of Human CellsAurelien Forget, Andreas Blaeser, Florian Miessmer, Marius Köpf, Daniela F. Duarte Campos, Nicolas H. Voelcker, Anton Blencowe, Horst Fischer,* and V. Prasad Shastri* DOI: 10.1002/adhm.201700255 medium-the bioink. [5] The former approach offers the advantage that the 3D scaffold does not have to be fabricated under cytocompatible conditions. Therefore, a broader range of materials can be employed, for example, thermoplasts, such as poly(caprolactone), [6] and additionally, other alternative scaffold fabrication techniques, such as electrospinning, or pressurized gyration can be combined with subsequent functionalization of the scaffold with proteins. [7] In contrast, the latter approach, that is, direct fabrication of cellloaded constructs by hydrogel molding or 3D printing, places high demands on the cytocompatibility of the material and the fabrication process and the resolution is limited by the size of the extrusion nozzle utilized in the fabrication process. [8] However, the advantage of direct fabrication techniques, especially of 3D bioprinting, is its ability to generate constructs with spatially defined cell and material composition. Moreover, biomaterials that are conventionally used in cell culture such as alginate, [9] Pluronic, [10] gelatin, [11] nanocellulose, [12] self-assembling peptides, [13] and agarose [14] are highly advantageous for direct cell printing as they are soluble in water and hence can be formulated as a cell carrier. There has been extensive effort to build on and improve the properties of watersoluble polymers as bioinks. [15,16] For example, to overcome the limitation of the solubilization of Pluronic and its limited diversity of mechanical properties, blending of Pluronic with alginate [17] and crosslinking using acrylate-modified Pluronic have been explored. [10] Notwithstanding these advances that utilize chemical crosslinking to control the mechanical properties of the bioinks, controlling the shear behavior and mechanical This study introduces a thermogelling bioink based on carboxylated agarose (CA) for bioprinting of mechanically defined microenvironments mimicking natural tissues. In CA system, by adjusting the degree of carboxylation, the elastic modulus of printed gels can be tuned over several orders of magnitudes (5-230 Pa) while ensuring almost no change to the shear viscosity (10-17 mPa) of the bioink solution; thus enabling the fabrication of 3D structures made of different mechanical domains under identical printing parameters and low nozzle shear stress. Human mesenchymal stem cells printed using CA as a bioink show significantly higher survival (95%) in comparison to when printed using native agarose (62%), a commonly used thermogelling hydrogel for 3D-bioprinting applications. This work paves the way toward the printing of complex tissue-like structures composed of a range of mechanically discrete microdomains that could potent...
One of the challenges in 3D-bioprinting is the realization of complex, volumetrically defined structures, that are also anatomically accurate and relevant. Towards this end, in this study we report the development and validation of a carboxylated agarose (CA)-based bioink that is amenable to 3D printing of free-standing structures with high stiffness at physiological temperature using microextrusion printing without the need for a fugitive phase or post-processing or support material (FRESH). By blending CA with negligible amounts of native agarose (NA) a bioink formulation (CANA) which is suitable for printing with nozzles of varying internal diameters under ideal pneumatic pressure was developed. The ability of the CANA ink to exhibit reproducible sol-gel transition at physiological temperature of 37 °C was established through rigorous characterization of the thermal behavior, and rheological properties. Using a customized bioprinter equipped with temperature-controlled nozzle and print bed, high-aspect ratio objects possessing anatomically-relevant curvature and architecture have been printed with high print reproducibility and dimension fidelity. Objects printed with CANA bioink were found to be structurally stable over a wide temperature range of 4 °C to 37 °C, and exhibited robust layer-to-layer bonding and integration, with evenly stratified structures, and a porous interior that is conducive to fluid transport. This exceptional layer-to-layer fusion (bonding) afforded by the CANA bioink during the print obviated the need for post-processing to stabilize printed structures. As a result, this novel CANA bioink is capable of yielding large (5–10 mm tall) free-standing objects ranging from simple tall cylinders, hemispheres, bifurcated ‘Y’-shaped and ‘S’-shaped hollow tubes, and cylinders with compartments without the need for support and/or a fugitive phase. Studies with human nasal chondrocytes showed that the CANA bioink is amenable to the incorporation of high density of cells (30 million/mL) without impact on printability. Furthermore, printed cells showed high viability and underwent mitosis which is necessary for promoting remodeling processes. The ability to print complex structures with high cell densities, combined with excellent cell and tissue biocompatibility of CA bodes well for the exploitation of CANA bioinks as a versatile 3D-bioprinting platform for the clinical translation of regenerative paradigms.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.