No abstract

No abstract

Magnetic separatrix configurations have been produced in JET for plasma currents of up to 3 MA. Experimental results obtained with these configurations show that some features can be achieved that are common to divertor tokamaks. In Ohmic discharges, high recycling regimes can be produced. In neutral beam heated discharges, substantial improvement of the energy confinement time is achieved together with the characteristic signatures of an H-mode. These characteristics include improved particle confinement, flatter density profile, and an increase in electron temperature especially at the edge, leading to a characteristic pedestal feature. At higher neutral beam power, higher plasma densities are reached, with deterioration of beam penetration and strong radiation losses in the outer region of the plasma. The global energy confinement time in the H-mode is observed to degrade with additional power. However, results of radial power balance analysis suggest that in the central region, where the radiation is not important, the degradation of confinement is small.

Formation of functional composite materials with desired properties is important for advanced application development. However, formation of a homogenous composite material via conventional mixing methods still remains a challenge due to agglomeration. Therefore, this work reports and demonstrates the formation of a homogeneous poly(methylmethacrylate) (PMMA)-indium tin oxide (ITO) composite with high visible light transparency (up to 90%) with an excellent shielding effect of infra-red (IR) via a facile electrostatic assembly method. This PMMA-ITO composite with good transparency and an IR shielding effect has good potential to be used in the automobile industry for vehicle windscreens as well as in heat preservation or preventive technology. The IR shielding rate is demonstrated to be controllable by changing the amount of ITO nanoparticles additive. This finding would provide a platform for development of IR optical related polymeric composite materials.

This work reports on a novel controlled nanocomposite fabrication technique which is applicable for material design via a micro- and nano-assembly method. The principle is based on the use of electrostatic adsorption of the surface charge-modified particles via layer-by-layer assembly. The polarity and the zeta potential of the surface charge was controlled using polycation and polyanion, while the zeta potential strength was controlled via the number of alternating coating layers which was determined using zeta potential measurement. A systematic study was conducted to demonstrate the feasibility of composite material assembly via electrostatic adsorption using alumina (Al 2 O 3 ) and silica (SiO 2 ) composite as a study model, which was carried out as a function of surface zeta potential, surface coverage percentage, and processing time. The considerable potential of this technique for composite material design is also further demonstrated with controlled assembly involving different materials in various structural forms such as fiber, whisker, nanosheets, and even irregular-shaped foam-like structured urethane. The composite materials designed using this EA method possess good potentials to be utilized for various applications such as mechanical property control, composite ceramic films formation, selective laser sintering, and rechargeable metal-air battery. Electronic supplementary material The online version of this article (10.1186/s11671-019-3129-1) contains supplementary material, which is available to authorized users.

No abstract

No abstract

No abstract