Diferentes condiciones experimentales fueron empleadas para evaluar el tipo de ácido y el pH adecuados para la extracción de pectina a partir de cáscaras de cacao y su aplicación en la obtención de una biopelicula. Se estudió tipo de ácido: clorhídrico y cítrico, y el pH a niveles 2, 3 y 4 a una temperatura constante de 90°C, las variables respuestas fueron: rendimiento de pectina, % de metoxilo % de esterificación, % de ácido galacturónico y % de acidez. En las extracciones de pectina, se reportó un rendimiento promedio de ácido cítrico para un pH de 2.0 de 2.17%; para un pH 3.0 de 2.56% y el pH de 4.0 de 1.03%; para el ácido clorhídrico se reportó un rendimiento promedio con pH 2.0 de 2.68%; para un pH de 3.0 de 2.13% y para un pH de 4.0 un rendimiento de 0.83%. La pectina fue caracterizada mediante la técnica de Owens para evaluar variables de acidez libre, peso equivalente y grado de esterificación, adicionalmente se realizó un análisis FTIR para conocer los grupos funcionales. Basados en el análisis del diseño experimental utilizado, se seleccionó la pectina de mejores características para la fabricación de la biopelícula mediante la mezcla de pectina con glicerina como agente plastificante. Se sometió la biopelícula a prueba de biodegradabilidad aerobia, según lo expuesto en la norma ISO 17556 de 2019 donde se obtuvo una pérdida de peso del 18,8% y producción de 53 mg de en 5 días, mostrando una buena capacidad de biodegradabilidad.
Introduction: The article is the product of the investigation of the determination of the concentration of particulate matter PM2.5, estimating the influence of temperature and precipitation, developed at the Universidad Libre, Bogotá Headquarters between the years 2018-2019. Problem: Concentrations of particulate matter have increased in recent years in Bogotá, generating a serious environmental problem, concentrations that have been caused by the automotive fleet and industries. Objective: To determine the relationship of the particulate material with the meteorological variables Precipitation and Temperature, and the influence of the contributing sources of PM2.5 in the studied area. Methodology: For the determination of [PM2.5] a WilBur model low volume sampler was used, the meteorological data were obtained from the Bogotá Air Quality Monitoring Network of the Secretary of the Environment. Softwares such as ArcGis, WRPLOT and MiniTab were used for the graphical representation of the results. Results: The average [PM2.5] for dry and wet season was 9.03 and 19.22μg / m3. . For the meteorological variables, a precipitation of 40.4 and 373.6 mm, a temperature of 14.3 and 15.32 ° C, respectively, was obtained. Conclusion: There is a low relationship between meteorological variables and [PM2.5] in both monitoring seasons, however, a behavior of concentrations similar to that found in the literature is evidenced. Originality: PM2.5 sampling in both seasons within the Free University, cataloged as a background area. Limitations: The monitoring time for the year 2018 was in the months of July and August and the year 2019 from March to May.
En este trabajo se determinaron in situ las concentraciones de material particulado (PM10) en dos puntos de la ciudad de Bogotá, uno en la zona centro y el otro en la zona occidental de la misma durante un periodo de muestreo realizado en el segundo semestre del 2018 (30 días válidos de muestreo). Igualmente se evaluó la correlación de las variables meteorológicas y la variable concentración de PM10, de ambos puntos en cuestión mediante el software libre MiniTab. Contrario a la preconcepción que se tenía debido a la presencia del alto desarrollo urbanístico en el punto de la zona centro y a una amplia zona verde en el punto de la zona occidental las concentraciones del contaminante fueron constantemente superiores al occidente de la ciudad. La dirección del viento predominante en la zona centro que genera un arrastre del contaminante hacia la zona occidental de la ciudad y la peatonalización de corredores viales fueron argumentados como las causas plausibles de las diferencias. Un total de 112 y 14 muertes prematuras anuales por cada 100.000 habitantes por causa de la exposición a la concentración del contaminante determinada que fueron estimadas para la zona centro y occidental correspondientemente.
La Industria maderera genera residuos que pueden ser aprovechables energéticamente a través de procesos de conversión térmica, lo cual presenta numerosas ventajas, entre las que se destacan un mayor contenido de energía por volumen, bajo contenido de cenizas y también de compuestos como nitrógeno y sulfuros. Este estudio da a conocer una forma de valorizar los residuos de madera provenientes de actividades industriales obteniendo materiales de mayor valor energético. En esta investigación se pirolizó la biomasa utilizando diferentes tamaños de partícula y niveles de temperatura para evaluar los productos obtenidos a una condición experimental dada, y así evaluar su potencial en la generación de nuevos materiales que pueden ser utilizados como combustibles. Por consiguiente, los residuos de madera fueron tamizados y alimentados a un sistema de pirólisis que consiste en un reactor de lecho fijo y un sistema de condensación donde se llevó a cabo la etapa de pirólisis en atmósfera inerte usando CO2 como gas de arrastre. De este proceso se obtuvieron tres productos: char (material sólido), bioaceite y gases. El char de un tamaño de 850um, temperatura de 500°C y tiempo de residencia de 30 minutos tuvo el poder calorífico más alto, demostrando a su vez la factibilidad de este producto sólido (char) para ser aprovechado energéticamente.
Chemical engineering and complexity, an undissipated structure...yetEngenharia química e complexidade, uma estrutura não dissipada ... ainda
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.