The effect of heteroatoms on hydrogen adsorption properties of activated and hybrid carbon materials is critically described. For that purpose, olive stones were activated chemically with KOH, and subsequently washed or not, and oxidised with ozone or not. Olive stones were also activated physically with CO 2 . A series of activated carbons prepared by chemical activation of sucrose was also investigated for comparison. As a result, many activated carbons with different pore-size distributions, surface areas, average micropore widths, oxygen contents and amounts of mineral matter could be compared. All were thoroughly characterised by adsorption of N 2 , CO 2 and H 2 O, elemental analysis, XPS, thermogravimetry, and adsorption of H 2 at different pressures. Many correlations between textural parameters, composition and adsorption properties could be evidenced, and were critically discussed. We show that the hydrogen uptake at 77 K is controlled by the following parameters, listed by decreasing order of importance: specific surface area, average micropore size, surface chemistry and shape of the pore size distribution. At room temperature (i.e., at 298 K), the adsorbed hydrogen uptake was in the range of 0.19 to 0.42 wt. %; the presence of large amounts of alkali metals can further improve the hydrogen adsorption properties, but surface chemistry still has a major influence, especially through the acidic surface functions.

Olive stones (OS) were submitted to hydrothermal carbonisation (HTC) in order to evaluate the possibility of producing high added-value products, mainly furfural (FU) and 5-hydroxymethylfurfural (5-HMF) on one hand and hydrochars and carbons on the other hand. Temperature (160-240 °C), residence time (1-8 h), initial pH (1-5.5) and liquid/solid ratio (4-48 w/w) were systematically varied in order to study the main products and to optimise FU production. FU production yield up to 19.9 %, based on the hemicellulose content, was obtained. Other minor, but valuable, compounds such as 5-methylfurfural (5-MF) and some phenolic compounds were also produced. The hydrochar was carbonised at 900 °C, and the resultant carbon material was highly ultramicroporous with a peak of pore size distribution centred on 0.5 nm and a surface area as high as 1065 m g, typical of most carbon molecular sieves.