No abstract

No abstract

The study focuses on the synthesis of a novel polymeric scaffold having good porosity and mechanical characteristics synthesized by using natural polymers and their optimization for application in cartilage tissue engineering. The scaffolds were synthesized via cryogelation technology using an optimized ratio of the polymer solutions (chitosan, agarose and gelatin) and cross-linker followed by the incubation at sub-zero temperature (2128C). Microstructure examination of the chitosan -agarose -gelatine (CAG) cryogels was done using scanning electron microscopy (SEM) and fluorescent microscopy. Mechanical analysis, such as the unconfined compression test, demonstrated that cryogels with varying chitosan concentrations, i.e. 0.5 -1% have a high compression modulus. In addition, fatigue tests revealed that scaffolds are suitable for bioreactor studies where gels are subjected to continuous cyclic strain. In order to confirm the stability, cryogels were subjected to high frequency (5 Hz) with 30 per cent compression of their original length up to 1 Â 10 5 cycles, gels did not show any significant changes in their mass and dimensions during the experiment. These cryogels have exhibited degradation capacity under aseptic conditions. CAG cryogels showed good cell adhesion of primary goat chondrocytes examined by SEM. Cytotoxicity of the material was checked by MTT assay and results confirmed the biocompatibility of the material. In vivo biocompatibility of the scaffolds was checked by the implantation of the scaffolds in laboratory animals. These results suggest the potential of CAG cryogels as a good three-dimensional scaffold for cartilage tissue engineering.

Tissue-engineered skin is a significant advance in the field of wound healing. It has mainly been developed because of limitations associated with the use of autografts and allografts where the donor site suffers from pain, infection, and scarring. Recently, tissue-engineered skin replacements have been finding widespread application, especially in the case of burns, where the major limiting factor is the availability of autologous skin. The development of a bioartificial skin facilitates the treatment of patients with deep burns and various skin-related disorders. The present review gives a comprehensive overview of the developments and future prospects of scaffolds as skin substitutes for tissue repair and regeneration.

No abstract

The aim of this study was to synthesize and characterize a nano-hydroxyapatite (nHAP) and calcium sulfate bone substitute (NC) for cranioplasty. The NC was functionalized with low concentrations of bone morphogenetic protein-2 (BMP-2) and zoledronic acid (ZA) and characterized both in vitro and in vivo. In vitro studies included MTT, ALP assays, and fluorescent staining of Saos-2 (human osteoblasts) and MC3T3-E1 (murine preosteoblasts) cells cultured on NC. An in vivo study divided 20 male Wistar rats into four groups: control (defect only), NC, NC + ZA, and NC + ZA + rhBMP-2. The materials were implanted in an 8.5 mm critical size defect in the calvarium for 12 weeks. Micro-CT quantitative analysis was carried out in vivo at 8 weeks and ex vivo after 12 weeks. Mineralization was highest in the NC + ZA + rhBMP-2 group (13.0 ± 2.8 mm) compared to the NC + ZA group (9.0 ± 3.2 mm), NC group (6.4 ± 1.9 mm), and control group (3.4 ± 1.0 mm) after 12 weeks. Histological and spectroscopic analysis of the defect site provided a qualitative confirmation of neo-bone, which was in agreement with the micro-CT results. In conclusion, NC can be used as a carrier for bioactive molecules, and functionalization with rhBMP-2 and ZA in low doses enhances bone regeneration.

With the advancement in biomaterial sciences, tissue-engineered scaffolds are developing as a promising strategy for the regeneration of damaged tissues. However, only a few of these scaffolds have been translated into clinical applications. One of the primary drawbacks of the existing scaffolds is the lack of adequate oxygen supply within the scaffolds. Oxygen-producing biomaterials have been developed as an alternate strategy but are faced with two major concerns. One is the control of the rate of oxygen generation, and the other is the production of reactive oxygen species (ROS). To address these concerns, here, we report the development of an oxygen-releasing antioxidant polymeric cryogel scaffold (PUAO-CPO) for sustained oxygen delivery. PUAO-CPO scaffold was fabricated using the cryogelation technique by the incorporation of calcium peroxide (CPO) in the antioxidant polyurethane (PUAO) scaffolds. The PUAO-CPO cryogels attenuated the ROS and showed a sustained release of oxygen over a period of 10 days. An in vitro analysis of the PUAO-CPO cryogels showed their ability to sustain H9C2 cardiomyoblast cells under hypoxic conditions, with cell viability being significantly better than the normal polyurethane (PU) scaffolds. Furthermore, in vivo studies using an ischemic flap model showed the ability of the oxygen-releasing cryogel scaffolds to prevent tissue necrosis upto 9 days. Histological examination indicated the maintenance of tissue architecture and collagen content, whereas immunostaining for proliferating cell nuclear antigen confirmed the viability of the ischemic tissue with oxygen delivery. Our study demonstrated an advanced approach for the development of oxygen-releasing biomaterials with sustained oxygen delivery as well as attenuated production of residual ROS and free radicals because of ischemia or oxygen generation. Hence, the oxygen-releasing PUAO-CPO cryogel scaffolds may be used with cell-based therapeutic approaches for the regeneration of damaged tissue, particularly with ischemic conditions such as myocardial infarction and chronic wound healing.

No abstract