In this study, electrical characteristics of MoTe2 field-effect transistors (FETs) are investigated as a function of channel thickness. The conductivity type in FETs, fabricated from exfoliated MoTe2 crystals, switched from p-type to ambipolar to n-type conduction with increasing MoTe2 channel thickness from 10.6 nm to 56.7 nm. This change in flake-thickness-dependent conducting behavior of MoTe2 FETs can be attributed to modulation of the Schottky barrier height and related bandgap alignment. Change in polarity as a function of channel thickness variation is also used for ammonia (NH3) sensing, which confirms the p- and n-type behavior of MoTe2 devices.

The need for low-cost high-performance broadband photon detection with sensitivity in the near infrared (NIR) has driven interest in new materials that combine high absorption with traditional electronic infrastructure (CMOS) compatibility. Here, we demonstrate a facile, low-cost and scalable, catalyst-free one-step solution-processed approach to grow one-dimensional Sb2Se3 nanostructures directly on flexible substrates for high-performance NIR photodetectors. Structural characterization and compositional analyses reveal high-quality single-crystalline material with orthorhombic crystal structure and a near-stoichiometric Sb/Se atomic ratio. We measure a direct band gap of 1.12 eV, which is consistent with predictions from theoretical simulations, indicating strong NIR potential. The fabricated metal-semiconductor-metal photodetectors exhibit fast response (on the order of milliseconds) and high performance (responsivity ~ 0.27 A/W) as well as excellent mechanical flexibility and durability. The results demonstrate the potential of molecular-ink-based Sb2Se3 nanostructures for flexible electronic and broadband optoelectronic device applications.

Doping is a key process by which the concentration and type of majority carriers can be tuned to achieve desired conduction properties. The common way of doping is via bulk impurities, as in the case of silicon. For van der Waals bonded semiconductors, control over bulk impurities is not as well developed, because they may either migrate between the layers or bond with the surfaces or interfaces becoming undesired scattering centers for carriers. Herein, we investigate by means of Kelvin probe force microscopy (KPFM) and density functional theory calculations (DFT) the doping of MoTe2 via surface charge transfer occurring in air. Using DFT, we show that oxygen molecules physisorb on the surface and increase its work function (compared to pristine surfaces) toward p-type behavior, which is consistent with our KPFM measurements. The surface charge transfer doping (SCTD) driven by adsorbed oxygen molecules can be easily controlled or reversed through thermal annealing of the entire sample. Furthermore, we also demonstrate local control of the doping by contact electrification. As a reversible and controllable nanoscale physisorption process, SCTD can thus open new avenues for the emerging field of 2D electronics.