Recent researches on advanced driver-assistance systems indicate great advances in terms of safety and comfort in automated driving. Advanced driver-assistance systems use control systems to perform most of the maneuvers as performed by the driver in the past. One of the useful advanced driver-assistance systems is automatic lane change system in order to avoid accidents. This study designs the controller of an automatic lane change system for an autonomous vehicle. The control law in this study is adaptive sliding mode control. To avoid chattering in adaptive sliding mode control, fuzzy boundary layer is used. Also, adaptive law is used for sliding-based switching gain. This adaptive controlling law is used to avoid the calculation of upper bound of system uncertainties. In this study, based on the boundary conditions, the vehicle lane change path planning and different maneuver periods are evaluated. To simulate the designed controller, CarSim-Simulink joint simulation model is used. This linkage leads to a full non-linear vehicle model. The results of simulation show excellent tracking for dry road conditions and acceptable tracking in icy and wet roads in some maneuvers of above 4-s long.

In this paper, a novel Lyapunov-based robust controller by using meta-heuristic optimization algorithm has been proposed for lateral control of an autonomous vehicle. In the first step, double lane change path has been designed using a fifth-degree polynomial (quantic) function and dynamic constraints. A lane changing path planning method has been used to design the double lane change manoeuvre. In the next step, position and orientation errors have been extracted based on the two-degree-of-freedom vehicle bicycle model. A combination of sliding mode and backstepping controllers has been used to control the steering in this paper. Overall stability of the combined controller has been analytically proved by defining a Lyapunov function and based on Lyapunov stability theorem. The proposed controller includes some constant parameters which have effects on controller performance; therefore, particle swarm optimization algorithm has been used for finding optimum values of these parameters. The comparing result of the proposed controller with backstepping controller illustrated the better performance of the proposed controller, especially in the low road frictions. Simulation of designed controllers has been conducted by linking CarSim software with Matlab/Simulink which provides a nonlinear full vehicle model. The simulation was performed for manoeuvres with different durations and road frictions. The proposed controller has outperformed the backstepping controller, especially in low frictions.

A correlation-based model order reduction algorithm is developed using support vector machine to model [Formula: see text] emission and break mean effective pressure of a medium-duty diesel engine. The support vector machine–based model order reduction algorithm is used to reduce the number of features of a 34-feature full-order model by evaluating the regression performance of the support vector machine–based model. Then, the support vector machine–based model order reduction algorithm is used to reduce the number of features of the full-order model. Two models for [Formula: see text] emission and break mean effective pressure are developed via model order reduction, one complex model with high accuracy, called high-order model, and the other with an acceptable accuracy and a simple structure, called low-order model. The high-order model has 29 features for [Formula: see text] and 20 features for break mean effective pressure, while the low-order model has nine features for [Formula: see text] and six features for break mean effective pressure. Then, the steady-state low-order model and high-order model are implemented in a nonlinear control-oriented model. To verify the accuracy of nonlinear control-oriented model, a fast response electrochemical [Formula: see text] sensor is used to experimentally study the engine transient [Formula: see text] emissions. The high-order model and low-order model support vector machine models of [Formula: see text] and break mean effective pressure are compared to a conventional artificial neural network with one hidden layer. The results illustrate that the developed support vector machine model has shorter training times (5–14 times faster) and higher accuracy especially for test data compared to the artificial neural network model. A control-oriented model is then developed to predict the dynamic behavior of the system. Finally, the performance of the low-order model and high-order model is evaluated for different rising and falling input transients at four different engine speeds. The transient test results validate the high accuracy of the high-order model and the acceptable accuracy of low-order model for both [Formula: see text] and break mean effective pressure. The high-order model is proposed as an accurate virtual plant while the low-order model is suitable for model-based controller design.

An internal combustion engine (ICE) is a highly nonlinear dynamic and complex engineering system whose operation is constrained by operational limits, including emissions, noise, peak in-cylinder pressure, combustion stability, and actuator constraints. To optimize today’s ICEs, seven to ten control actuators and 10–20 feedback sensors are often used, depending on the engine applications and target emission regulations. This requires extensive engine experimentation to calibrate the engine control module (ECM), which is both cumbersome and costly. Despite these efforts, optimal operation, particularly during engine transients and to meet real driving emission (RDE) targets for broad engine speed and load conditions, has still not been obtained. Methods of model predictive control (MPC) have shown promising results for real-time multi-objective optimal control of constrained multi-variable nonlinear systems, including ICEs. This paper reviews the application of MPC for ICEs and analyzes the recent developments in MPC that can be utilized in ECMs. ICE control and calibration can be enhanced by taking advantage of the recent developments in the field of Artificial Intelligence (AI) in applying Machine Learning (ML) to large-scale engine data. Recent developments in the field of ML-MPC are investigated, and promising methods for ICE control applications are identified in this paper.

No abstract