ABSTRAKE glass ber dental adalah ber yang sering digunakan di kedokteran gigi. Ketersediaan E glass ber di Indonesia masih sangat terbatas. Berbagai jenis bahan glass ber non dental banyak ditemukan dipasaran sebagai material engeenering dengan harga yang relatif murah sehingga diharapkan dapat digunakan sebagai alternatif pengganti E glass ber dental. Komposisi glass ber non dental hampir sama dengan E glass ber dental. Komposisi berpengaruh terhadap sifat mekanis dan sifat-sifat kimia ber. Komposisi glass ber seperti Na 2 O dan K 2 O akan meningkatkan ketahanan terhadapap air. Tujuan dari penelitian ini adalah mengetahui pengaruh komposisi glass ber non dental terhadap kelarutan komponen. Bahan yang digunakan dalam penelitian ini adalah E glass ber dental (Fiber-splint, Polydentia SA, Switzerland), glass ber non dental komposisi A (LT, China), komposisi B (CMAX, China), komposisi C (HJ, China), owable komposit (CharmFill Flow, Denkist, Korea) dan silane coupling agent (Monobond S, Ivoclar Vivadent, Liechtenstein). Subjek dibagi dalam 4 kelompok untuk dilakukan uji kelarutan berdasarkan ISO 4049. Hasil yang diperoleh dianalisis menggunakan ANAVA satu jalur (α = 0,05). Hasil penelitian menunjukkan rerata kelarutan komponen (%) yang terendah pada kelompok E-glass ber dental (0,476±0,03) dan hasil tertinggi pada glass ber non dental C (0,600±0,01). Hasil uji Anava satu jalur menunjukkan perbedaan yang bermakna antara komposisi ber pada kelarutan komponen (p<0,05). Kesimpulan penelitian adalah komposisi Na 2 O dan K 2 O serta CaO dan MgO yang rendah dapat menurunkan sifat kelarutan komponen dari ber reinforced composites.Kata kunci: glass ber non dental, kelarutan komponen, komposisi ber ABSTRACT: The effect of composition glass ber non dental on water solubility of ber reinforced composites. E glass ber dental is one of the most used dental bers in several applications in the dental eld. However, the available of E glass ber dental in Indonesia is very limited. A variety of types of non-dental glass ber material is easily found as the materials engineering. The purpose of the study was to evaluate the effect of composition non dental glass ber on the component solubility of FRC. The materials used in the research was E glass ber dental (Fiber splint, Polydentia SA, Switzerland), composition A non-dental glass ber (LT, China), composition B (CMAX, China), composition C (HJ, China), owable composite (Charm ll Flow, Denkist, Korea) and silane coupling agent (Monobond S, Ivoclair Vivadent, Liechtenstein). The subject was divided into 4 groups. Component solubility test was based on the ISO 4049. The result was then analyzed with one way ANOVA (α=0,05). The result of the research showed that on the average percentage of the solubility (%), the lowest was on the group of E glass ber dental (0.476±0.03) and the highest was on the non dental glass ber C (0.600±0.01). The result of the one way ANOVA test showed a signi cant difference between the composi...
Dental and oral health problems, especially dental caries, are a disease that affects almost half of the world's population. The largest proportion of dental health problems in Indonesia is dental caries. The predisposing factors for dental caries are knowledge and behavior. Usaha Kesehatan Gigi Sekolah (UKGS) in elementary schools is needed in an effort to increase knowledge and awareness of dental and oral health. The problems faced by SD/MI Kartasura are that UKGS activities have not been running continuously and the lack of facilities and infrastructure to support dental and oral health programs. Solutions to increase dental and oral health knowledge for little dentists at elementary school the method of implementing activities includes identifying partner problems (surveys), making starter kits for little dentists, making educational media, training little dentists and accompanying teachers, implementing routine programs by little dentists, monitoring and evaluation. This activity is able to increase the knowledge of little dentists in maintaining dental and oral health.
Fiber reinforced composite (FRC) merupakan kombinasi antara resin komposit dan fiber yang dilapisi silane. Silane coupling agent merupakan bahan dengan dasar silicon-based yang berfungsi membentuk ikatan antara resin komposit dan fiber. Pengaplikasian silane melalui dua proses yaitu hidrolisis dan kondensasi. Mekanisme kerja silane dipengaruhi oleh beberapa faktor salah satunya yaitu volume yang tepat dapat mengurangi penyerapan air yang akan berdampak pada peningkatan adhesi dan kekuatan mekanik salah satunya kekerasan dari material tersebut. Penelitian ini bertujuan untuk mengetahui adanya pengaruh jumlah aplikasi silane terhadap kekerasan FRC. Penelitian ini merupakan penelitian eksperimental murni. Sampel berjumlah 32, kelompok I adalah satu kali aplikasi silane, volume 0,58 µl dan satu kali pengeringan selama 60 detik, kelompok II dua kali aplikasi silane volume 0,29 µl dan dua kali pengeringan selama 30 detik. Sampel berbentuk disk diameter 5 mm x tinggi 2 mm. Pengujian tingkat kekerasan menggunakan Vickers Indenter Microhardness Tester. Uji Independent t-test menunjukkan bahwa terdapat perbedaan bermakna antar kelompok dengan nilai signifikansi p=0,000 (p0,05). Jumlah aplikasi silane berpengaruh terhadap kekerasan FRC dan jumlah aplikasi silane yang paling efektif digunakan adalah dua kali pengaplikasian silane dengan volume 0,29 µl dan dua kali pengeringan selama 30 detik.
Background: Fiber-reinforced composites represent a combination of fiber-reinforced composite materials. The availability of fiber within dentistry in Indonesia is limited and, therefore, requires lengthy advance ordering. The increasing use of fiber derived from natural materials, such as silk, is of greater concern due to its considerable mechanical strength, biocompatibility and wider availability. The application of fiber will increase the mechanical strength of fiber-reinforced composites, including both flexural and compression strength. One factor affecting the mechanical strength of fiber is the laying of fiber or fiber position. Purpose: The purpose of this research is to establish the influence of silkworm fiber position on both the flexural and compression strength of silk fiber-reinforced composites. Methods: Flexural strength and compression strength tests using a universal testing machine involved the division of the research population into three treatment groups: compression side, neutral side and tension side. Results: The results of data analysis indicated that the tension side group possessed the highest flexural strength (121.42 MPa), while the compression side group demonstrated the highest compression strength (337.65 MPa). A one-way ANOVA analysis test produced a significant result of p = 0.000 (<0.05) both for silkworm fiber position effect and compression strength of silk fiber reinforced composites. Conclusion: The position of silkworm fiber will affect its flexural strength as well as that of the compression of silk fiber-reinforced composites.
Composite resin is the most widely used restorative material due to its aesthetic properties, however, it has a drawback, namely edge leakage either by the polymerization process or by the release of components during the usage process. Therefore, composite resins containing fluorine has been developed as an effort to increase the success of restorative treatment by minimizing the occurrence of secondary caries or recurrent caries around the edges of the restoration. Composite resin releasing fluorine does not show a burst effect like the glass ionomer cement, but the pattern of fluorine release is low and constant. This was a pure laboratory experimental study. Samples were 25 maxillary 1st premolars prepared by class 1 cavity and filled with fluorine composite resin Tetric N-Ceram (Ivoclar Vivadent, Liechtenstein). Samples were divided into five groups that were immersed in sterile distilled water for 1, 7, 14, 21, 28 days, followed by 5% methylene blue for 4 hours. Edge leakage test using USB Digital Stereo Microscope used dye penetration method. Edge leakage was measured at the penetration depth of 5% methylene blue which was evaluated along the mesial and distal side of the restoration wall, then the side with the deepest color penetration was selected. The LSD test result showed that there was a significant difference between group A and the other four groups. In addition, there was no significant difference among the four groups (B, C, D and E). In conclusion, marginal leakage of the composite resin showed a constant value in each group according to a constant rate of fluorine release as well. Keywords: fluorine release rate; fluorine composite resin; restoration; secondary caries Abstrak: Resin komposit merupakan bahan restorasi yang memiliki kekurangan yaitu kebocoran tepi oleh proses polimerisasi maupun terlepasnya komponen. Resin komposit dengan kandungan fluor dikembangkan sebagai upaya untuk meningkatkan keberhasilan restoratif dengan meminimalkan terjadinya karies sekunder di tepi restorasi, dimana pelepasan fluornya tidak menunjukkan burst effect, melainkan pola pelepasan fluor rendah dan konstan. Penelitian ini bertujuan untuk mengetahui pengaruh laju pelepasan fluor pada resin komposit berfluor terhadap kebocoran tepi. Jenis penelitian ialah eksperimental murni laboratorik. Sampel berupa gigi premolar 1 rahang atas yang dipreparasi kavitas kelas 1 dan ditumpat menggunakan resin komposit berfluor sejumlah 25 buah. Sampel dibagi atas lima kelompok (A – E) untuk dilakukan perendaman dalam akuades steril selama 1, 7, 14, 21, dan 28 hari, dilanjutkan dengan methylene blue 5% selama 4 jam. Uji kebocoran tepi menggunakan USB Digital Mikroskop Stereo dengan metode penetrasi zat warna. Kebocoran tepi diukur pada kedalaman penetrasi methylene blue 5% dievaluasi sepanjang dinding restorasi sisi mesial dan distal, kemudian dipilih sisi dengan penetrasi warna terdalam. Hasil uji LSD menunjukkan terdapat perbedaan bermakna antara kelompok A dengan empat kelompok lainnya, dan tidak terdapat perbedaan bermakna antara keempat kelompok yaitu B, C, D dan E. Simpulan penelitian ialah kebocoran tepi resin komposit menunjukkan nilai konstan pada setiap kelompok sesuai dengan laju pelepasan fluor yang konstan juga. Kata kunci: laju pelepasan fluor; resin komposit berfluor; restorasi; karies sekunder
Pendahuluan: Gingivitis merupakan suatu inflamasi yang melibatkan jaringan lunak di sekitar gigi yaitu jaringan gingiva.Gingivitis ditandai dengan perubahan warna, perdarahan, adanya pembengkakan, dan lesi pada gingiva. Perawatan pada penyakit periodontal merupakan tindakan yang dilakukan untuk menghilangkan penyakit yang ada dan untuk mencegah kembalinya penyakit tersebut. KASUS :Seorang perempuan berusia 21 tahun datang ke Rumah Sakit Fakultas Kedokteran Gigi Universitas Muhammadiyah Surakarta mengeluhkan bau mulut dan gusi berdarah saat menyikat gigi. Pemeriksaan obyektif didapatkan skor OHI 7,4 dan plak indeks 87% dan gingivitis pada gingiva region anterior. Dilakukan perawatan scalling dan root planning, satu minggu pasca tindakan dilakukan control. Pada saat dilakukan control didapatkan gingiva pada region gigi 13 masih kemerahan dan masih berdarah saat pasien menyikat gigi pada hari yang sama dilakukan perawatan lanjutan berupa perawatan kuretase gingiva pada region gigi 13 menggunakan teknik kuretase tertutup menggunakan kuret gracey. Satu minggu pasca kuretase dilakukan control dan didapatkan kedalaman poket sudah berkurang sekitar 2 mm dan sudah tidak terdapat keluhan gusi berdarah saat menyikat gigi. Kesimpulan: Perawatan kuretase pada kasus ini menggunakan metode kuretase gingiva dengan kuret gracey dikatakan berhasil karena satu minggu setelah perawatan dilakukan control. Pasien sudah tidak merasakan keluhan gusi berdarah dan kedalaman pocket periodontal sudah berkurang.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.