AbstrakPenyakit tanaman akan terus menjadi faktor pembatas tercapainya produksi pertanian yang optimal. Hal ini menuntut para fitopatologis terus melakukan riset untuk mencari berbagai taktik pengendaliannya. Pestisida sintetis sebaiknya tidak menjadi pengendali utama karena banyaknya efek negatif. Pemanfaatan pestisida nabati menjadi alternatif dalam pengendalian penyakit.Pestisida nabati memiliki keunggulan diantaranya ramah lingkungan, mudah terdegradasi, sumber daya lokal melimpah,murah, serta sejalan dengan konsep pertanian berkelanjutan. Artikel ini memberikan informasi mengenai jenis metabolit sekunder tanaman dan jalur pembentukannya, serta prospek pemanfaatan metabolit tersebut sebagai pestisida nabati untuk mengendalikan penyakit pada tanaman karet. Besarnya keanekaragaman hayati tumbuhan menghasilkan aneka jenis metabolit sekunder yang berpotensi sebagai pestisida nabati. Total ratusan ribu jenis tumbuhan yang sudah dikenal memiliki efek medisinal, banyak yang diteliti dan dimanfaatkan sebagai pestisida nabati. Produk pestisida nabati untuk tanaman hortikultura mulai banyak dikomersialkan. Pada tanaman karet, pemanfaatan pestisida nabati masih pada tahap penelitian,dan belum sampai tahap formulasi produk komersial. Oleh karena itu diperlukan langkah strategis dan arah yang jelas terkait penelitian pestisida nabati pada tanaman karet diantaranya berupa eksplorasi dan pendataan pestisida nabati potensial, isolasi dan pemurnian bahan aktif pestisida nabati serta studi mekanisme kerja pestisida nabati.
Susut bobot slab dan lump merupakan faktor penting dalam penjualan bahan olah karet (bokar). Penentuan susut bobot yang tidak tepat akan merugikan salah satu pihak dalam penjualan bokar. Informasi susut bobot juga dapat dijadikan sebagai sarana pengawasan internal terhadap kemungkinan kehilangan saat pengiriman bokar menuju pabrik. Susut bobot juga berkaitan dengan biaya transportasi dari kebun menuju pabrik. Penelitian ini bertujuan untuk mengetahuipengaruh dari kadar karet kering (KKK) lateks terhadapsusut bobot slab dan lump, pola penyusutannya serta kaitannya dengan biaya transportasi. Penelitian menggunakan lateks kebun dengan lima variasi KKK (20%, 21%, 23%, 27%, dan 31%) serta lump mangkok, masing-masing dengan empat ulangan. Penimbangan bobot slab dan lump dilakukan selama 21 hari. Hasil penelitian menunjukkan bahwa rata-rata susut harian tertinggi (6,31%) diperoleh pada slab yang berasal dari lateks dengan KKK paling encer yaitu 20%. Sebaliknya, rata-rata susut harian terendah (2,41%) diperoleh dari sampel lump mangkok dengan KKK awal 56%. Semakin tinggi KKK lateks maka slab yang dihasilkan mempunyai susut bobot yang semakin rendah. Slab dan lump mengalami susut bobot yang tinggi pada 1 – 2 hari pertama masa simpan, dan cenderung menurun secara fluktuatif pada hari-hari berikutnya hingga mendekati bobot tetap. Perhitungan biaya transportasi menunjukkan bahwa, dari tiga kelompok lump, maka kelompok lump dengan masa simpan paling lama (11 – 25 hari) mempunyai biaya transportasi paling rendah sebesar Rp. 448,80 per kg karet kering. Hal yang serupa juga terjadi pada kelompok slab. Semakin lama masa simpan slab dan lump, maka biaya transportasi ke pabrik semakin rendah.
Most of field latex for raw rubber is AbstrakHampir seluruh lateks kebun untuk produk karet ekspor harus digumpalkan sebelum diproses lanjut. Bahan penggumpal lateks yang selama ini dianjurkan adalah asam format. Dengan alasan harga yang relatif mahal dan ketersediaan yang sulit diperoleh, sebagian besar petani karet jarang menggunakan asam format dan lebih memilih menggunakan penggumpal yang tidak dianjurkan seperti pupuk SP dan TSP. Ini berakibat menurunkan kualitas karet. Penelitian ini bertujuan untuk melakukan pengujian terhadap kualitas Kritex SP (penggumpal alternatif berbahan aktif asam anorganik) dalam menggumpalkan lateks dan membandingkannya dengan asam format sebagai kontrol. Percobaan dilakukan pada skala laboratorium untuk mengetahui mutu krep, dan pada skala pabrik untuk mengetahui pengolahan RSS menggunakan penggumpal Kritex SP. Parameter yang d i a m a t i m e l i p u t i w a k t u k o a g u l a s i , spesifikasi teknis, dan sifat fisika vulkanisat krep maupun RSS. Hasil percobaan menunjukkan bahwa lama penggumpalan lateks kebun dengan larutan 2,50% Kritex SP (25 menit) berbeda nyata dengan lama penggumpalan larutan 7,50% Kritex SP (18 menit), tetapi tidak berbeda secara signifikan dibandingkan dengan lama penggumpalan larutan 5% Kritex SP (20,33 menit) dan larutan kontrol (22,33 menit). Koagulum yang dihasilkan dengan penggumpal Kritex SP bersifat lebih lembut dan lunak dibandingkan koagulum dari asam format. Spesifikasi teknis dan sifat fisika vulkanisat krep dari Kritex SP tidak berbeda nyata dengan krep dari asam format. Dosis Kritex SP yang diperlukan dalam pengolahan RSS (2,35 ml/liter lateks) lebih tinggi dibandingkan dosis asam format (1,90 ml/liter lateks). Lembaran sit basah hasil penggumpalan Kritex SP berukuran lebih panjang, lebih tipis dan kurang lebar dibandingkan sit
This study compared the total solid content and compound properties of Hevea rubber latex produced from material collected during different periods. Samples were collected from five trees, with the collection replicated three times with tapping task as replication. Observed parameters included total solid content, vulcanization characteristics, technical and physical properties. The results exhibited that the longer latex flowed, the more total solid content tended to decrease. Results indicate that compound of latex collected 20 minutes (C20), 60 minutes (C60), and 300 minutes (C300) after tapping qualified for SIR 20. Other parameters did not show a significant difference among the three tested compounds. Considering the products requiring high dry rubber content, it is suggested not to blend the late collection with main collected latex.
Fenomena gugur daun sekunder dialami kebun-kebun di wilayah Sumatera pada tahun 2017. Studi ini bertujuan untuk mengetahui penyebab fenomena gugur daun berulang serta dampaknya terhadap produksi. Data diperoleh melalui survei lapangan, pengamatan di laboratorium serta analisis data curah hujan dan produksi bertujuan dari 35 titik pengamatan pada areal tanaman menghasilkan dari 20 kebun di wilayah Sumatera Utara yang dilaksanakan bulan September – Oktober 2017. Curah hujan yang tinggi pada bulan Maret diduga menjadi pemicu serangan penyakit gugur daun secara luas karena pada periode ini tanaman sedang membentuk daun baru. Colletotrichum dan Fusicoccum merupakan penyakit yang dominan yang dijumpai, sedangkan Oidium ditemukan dalam skala kecil. Klon PB 260 merupakan klon yang paling banyak mengalami serangan. Serangan juga dijumpai pada klon PB 330, PB 340, RRIM 712, RRIM 911, dan RRIM 937. Penurunan produksi sebesar 1,3% dijumpai pada serangan Colletotrichum dan 2,7% akibat Fusicoccum. Penurunan produksi tertinggi terjadi pada PB 330 (14,4%) kemudian disusul berturut-turut pada klon klon BPM 1 (14,0%), PB 340 (10,8%), RRIM 712 (9,9%), dan RRIM 937 (1,5%). Teknis pencegahan dan penanggulangan serangan penyakit gugur daun mendesak untuk disosialisasikan kepada pekebun. Di samping itu, penelitian mengenai spesies dan ras baru patogen gugur daun perlu dilakukan terutama Fusicoccum mengingat penyakit ini tergolong baru di Indonesia dan belum banyak terpublikasi.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.