Research on two-dimensional designer optical structures, or metasurfaces, has mainly focused on controlling the wavefronts of light propagating in free space. Here, we show that gradient metasurface structures consisting of phased arrays of plasmonic or dielectric nanoantennas can be used to control guided waves via strong optical scattering at subwavelength intervals. Based on this design principle, we experimentally demonstrate waveguide mode converters, polarization rotators and waveguide devices supporting asymmetric optical power transmission. We also demonstrate all-dielectric on-chip polarization rotators based on phased arrays of Mie resonators with negligible insertion losses. Our gradient metasurfaces can enable small-footprint, broadband and low-loss photonic integrated devices.

Metasurfaces have become a promising means for manipulating optical wavefronts in flat and high-performance optical devices. Conventionally metasurface device design relies on trial-anderror methods to obtain target electromagnetic (EM) responses, which demands significant efforts to investigate the enormous number of possible meta-atom structures. In this paper, a deep neural network approach is introduced that significantly improves on both speed and accuracy compared to techniques currently used to assemble metasurface-based devices. Our neural network approach overcomes three key challenges that have limited previous neural-network-based design schemes: input/output vector dimensional mismatch, accurate EM-wave phase prediction, as well as adaptation to 3-D dielectric structures, and can be generically applied to a wide variety of metasurface device designs across the entire electromagnetic spectrum. Using this new methodology, examples of neural networks capable of producing on-demand designs for metaatoms, metasurface filters, and phase-change reconfigurable metasurfaces are demonstrated.Here we propose an implicit way to construct and train the networks to predict the amplitude and phase responses of meta-structures. For a typical meta-structure, like the one shown in Fig. 1A,

In this letter, we experimentally evaluate the effect of miniaturization and surface roughness on transmission losses within a Si/SiO2 waveguide system, and explain the results using a theoretical model. Micrometer/nanometer-sized waveguides are imperative for its potential use in dense integrated optics and optical interconnection for silicon integrated circuits. A theoretical model was employed to predict the relationship between the transmission losses of the dielectric silicon waveguide and its width. This model accurately predicts that loss increases as waveguide width decreases. Furthermore, we show that a major source of loss comes from sidewall roughness. We have constructed a complete contour map showing the interdependence of sidewall roughness and transmission loss, to assist users in their design of an optimal waveguide fabrication process that minimizes loss. Additionally, users can find an effective path to reduce the scattering loss from sidewall roughness. Using this map, we confirm that nanometer-size silicon waveguides with 0.1 dB/cm transmission loss are possible with the currently available technology.

Abstract:The emergence of silicon photonics over the past two decades has established silicon as a preferred substrate platform for photonic integration. While most silicon-based photonic components have so far been realized in the near-infrared (near-IR) telecommunication bands, the mid-infrared (mid-IR, 2-20-μm wavelength) band presents a significant growth opportunity for integrated photonics. In this review, we offer our perspective on the burgeoning field of mid-IR integrated photonics on silicon. A comprehensive survey on the state-of-the-art of key photonic devices such as waveguides, light sources, modulators, and detectors is presented. Furthermore, on-chip spectroscopic chemical sensing is quantitatively analyzed as an example of mid-IR photonic system integration based on these basic building blocks, and the constituent component choices are discussed and contrasted in the context of system performance and integration technologies.

Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency, especially for non-mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning in the full 2π range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling binary switching of metasurfaces between arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for reconfigurable meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 μm wavelength. The reconfigurable metalens features a record large switching contrast ratio of 29.5 dB. We further validate aberration-free and multi-depth imaging using the metalens, which represents a key experimental demonstration of a non-mechanical tunable metalens with diffraction-limited performance.

Group IV photonics hold great potential for nonlinear applications in the near-and mid-infrared (IR) wavelength ranges, exhibiting strong nonlinearities in bulk materials, high index contrast, CMOS compatibility, and cost-effectiveness. In this paper, we review our recent numerical work on various types of silicon and germanium waveguides for octave-spanning ultrafast nonlinear applications. We discuss the material properties of silicon, silicon nitride, silicon nano-crystals, silica, germanium, and chalcogenide glasses including arsenic sulfide and arsenic selenide to use them for waveguide core, cladding and slot layer. The waveguides are analyzed and improved for four spectrum ranges from visible, near-IR to mid-IR, with material dispersion given by Sellmeier equations and wavelength-dependent nonlinear Kerr index taken into account. Broadband dispersion engineering is emphasized as a critical approach to achieving on-chip octavespanning nonlinear functions. These include octave-wide supercontinuum generation, ultrashort pulse compression to sub-cycle level, and mode-locked Kerr frequency comb generation based on few-cycle cavity solitons, which are potentially useful for next-generation optical communications, signal processing, imaging and sensing applications.

We have fabricated and tested, to the best of our knowledge, the first microfluidic device monolithically integrated with planar chalcogenide glass waveguides on a silicon substrate. High-quality Ge(23)Sb(7)S(70) glass films have been deposited onto oxide coated silicon wafers using thermal evaporation, and high-index-contrast channel waveguides have been defined using SF(6) plasma etching. Microfluidic channel patterning in photocurable resin (SU8) and channel sealing by a polydimethylsiloxane (PDMS) cover completed the device fabrication. The chalcogenide waveguides yield a transmission loss of 2.3 dB/cm at 1550 nm. We show in this letter that using this device, N-methylaniline can be detected using its well-defined absorption fingerprint of the N-H bond near 1496 nm. Our measurements indicate linear response of the sensor to varying N-methylaniline concentrations. From our experiments, a sensitivity of this sensor down to a N-methylaniline concentration 0.7 vol. % is expected. Given the low-cost fabrication process used, and robust device configuration, our integration scheme provides a promising device platform for chemical sensing applications.

Wide field-of-view (FOV) optical functionality is crucial for implementation of advanced imaging and image projection devices. Conventionally, wide FOV operation is attained with complicated assembly of multiple optical elements known as "fisheye lenses". Here we present a novel metalens design capable of performing diffractionlimited focusing and imaging over an unprecedented near 180°angular FOV. The lens is monolithically integrated on a one-piece flat substrate and involves only a single layer of metasurface that corrects third-order Seidel aberrations including coma, astigmatism, and field curvature. The metalens further features a planar focal surface, which enables considerably simplified system architectures for applications in imaging and projection. We fabricated the metalens using Huygens meta-atoms operating at 5.2 μm wavelength and experimentally demonstrated aberration-free focusing and imaging over the entire FOV. The design concept is generic and can be readily adapted to different meta-atom geometries and wavelength ranges to meet diverse application demands.