A novel and compact super wideband (SWB) exponentially tapered feed region and patch printed monopole antenna is proposed. This antenna is fed by a 50-Ω triangular tapered feed line. The antenna operates over a bandwidth of 2.5-80 GHz with a return loss of 10 dB or more. The dimensions of the proposed antenna are 40 × 30 × 1.6 mm 3. An exponential curve is employed in the feed region and a triangular tapered feed line is used. The ground plane feed gap is optimised to 1.3 mm. The proposed tapered monopole antenna has demonstrated an ultra-large bandwidth with satisfactory radiation properties. Two particular antennas are examined, one with a rectangular feed line and another with a triangular tapered feed line. The performance of the antenna in frequency domain is investigated, and a good agreement is achieved between the simulation and experimental results. In addition, the time domain characteristics of the proposed antenna are evaluated experimentally. This antenna can be used in ultra-wideband or SWB applications.

In this article, a simple and compact dual bandnotched (DBN) super wideband (SWB) printed monopole antenna (PMA) has been proposed. The proposed antenna composed of a circular PMA, which is connected through a 50-Ω triangular tapered microstrip fed line (TTMFL) and a round-cornered finite ground plane (RCFGP). It exhibits a very wide frequency band from 1.6-25 GHz (ratio bandwidth of 15.63:1) with a voltage standing wave ratio (VSWR)  2. By employing a U-shaped parasitic element (USPE) near the RCFGP and a T-shaped protruded stub (TSPS) inside the radiating patch, a single band-notched (SBN) characteristic in the frequency band of 3. is generated. In order to realize the second band-notched function for X-band satellite communication systems (7.2-8.4 GHz), a U-shaped slot (USS) has been inserted in the RCFGP. The overall dimension of the proposed antenna is 24  30  0.787 mm 3 and occupies a relatively small space compared to the existing DBN antennas. Good agreement has been attained between predicted and measured results.

In this paper, a band-notched compact printed monopole super wideband (SWB) antenna has been designed and fabricated. The SWB antenna composed of a radiating patch with a 50 Ω triangular tapered feed line which is connected through a feed region, and a chamfered ground plane (CGP), that covers the frequency band from 0.9–100 GHz (ratio bandwidth of 111.1:1) with a reflection coefficient |S11| < −10 dB, except in the notched band of 4.7–6 GHz for Wireless local area network IEEE 802.11a and HIPERLAN/2 WLAN band. To realize the band notch characteristics a C-shape parasitic element is employed near the CGP etched with two symmetrical L-slots and placed under the radiating patch. Proposed antenna structure occupies a relatively small space (30 × 40 × 0.787 mm3) and achieved much wider impedance bandwidth as well as higher gain compared with the existing ultra wideband and SWB antennas.

In this article, a printed triangular‐shaped monopole antenna is proposed for emerging ultrawideband application. The proposed antenna uses a triangular radiating patch which is directly fed by a 50‐Ω microstrip feed line. To improve the impedance bandwidth, a round‐corner ground plane has been used. To further improve the impedance bandwidth for the entire band, a microstrip transition (near the antenna front end) has been introduced between the microstrip feed line and the triangular radiator that provides a wide impedance bandwidth from 1.8 to 15.0 GHz for true|S11true| ≤ −10 dB. The proposed antenna has been realized using the FR‐4 printed circuit board substrate and occupies a small size of about 24 × 30 × 1.6 mm3 compared to conventional antenna structures. The proposed antenna has nearly omni‐directional radiation pattern and moderate gain throughout the operating frequency region. © 2014 Wiley Periodicals, Inc. Microwave Opt Technol Lett 56:1155–1159, 2014

No abstract

No abstract

No abstract

No abstract