-The research on coastal sand in Mataram-Lombok city, located at several beaches, namely, Gading, Loang Baloq, Penghulu Agung, and Ampenan, is
The research was conducted to examine the content of Fe and other metal in natural sand of beach Ampenan, Mataram, Indonesia which is expected to be used as microwave absorbent material. Characterizations of the electrical and magnetic properties Barium M-Hexaferrite (BaM) with Zn-Mn doping (BaFe12-2xZnxMnxO19) are biosynthesized. Research carried out among others tested the metal content of Fe and other metals, synthesize BaFe12-2xZnxMnxO19. The samples were characterized using Vibrating Sample Magnetometer (VSM) and Network Vector Analyzer (VNA) for the test properties of electricity and magnetism, as well as the absorption of microwaves. The results from the AAS (Atomic Absorption Spectroscopy) testing showed that each gram of magnetic minerals in the natural sand containing 16.27 mg Fe, which states that the majority of metal components content is 69.80% Fe metal with the Magnetite and Hematite phases. The result from VSM showed that the coercivity value decreased when doping ion concentration and calcination temperature increased (0.16 Tesla at 600°C for x = 0.0 and 0.09 Tesla at 800°C for x = 1.0). Value of magnetic saturation and the magnetic remanence decreased with increasing ion concentration (Ms= 4.94 emu/g at x = 0.0 decreased to 0.31 emu/g at x = 1.0) and Mr = 3.43 emu/g for x = 0.0 decreased to 0.06 emu/g at x=1.0. These indicates that the sample has been soft magnetic. The result from VNA showed that the electrical conductivity values measured in the range 8.0-15.0 GHz indicate that the sample is a semiconductor (1.62×10-2 S/cm). The result from VNA showed that the microwave absorption properties increased at higher concentration of doping ions and the calcination temperature would increase the value of Reflection Loss (RL). Maximum RL value of the sample is -14.37 dB at 15 GHz and the absorption coefficient of 96.34%. These results indicate that the BaFe10.8Zn0.6Mn0.6O19 sample can be applied as a microwave absorbent material on X-band to Ku- band frequency. Keyword: Characterization, Barium M-Hexaferrite, doping, microwave, absorbent.
ABSTRAK (BPS, 2014, DITJENBUN, 2013. Ampas tebu mamiliki
Lembar Kerja Peserta Didik (LKPD) adalah alat bantu belajar yang dibuat oleh guru dalam kegiatan yang disusun dan dirancang sesuai dengan kondisi dan situasi di dalam kelas, yang memuat petunjuk pelaksanaan praktik di kelas, serta percobaan yang dapat dilakukan. di kelas maupun di rumah, serta memuat materi diskusi, dan latihan soal dengan petunjuk agar siswa lebih aktif dalam proses pembelajaran dan menciptakan lingkungan yang menyenangkan yang dapat membantu siswa berhasil dalam belajar. Tujuan penelitian ini adalah untuk melihat apakah ada perbedaan pengaruh LKPD berbasis Discovery Learning dengan LKPD yang biasa digunakan di sekolah terhadap peningkatan hasil belajar siswa. Penelitian ini menggunakan desain eksperimen dengan pre-test-post-test control group. Teknik pengambilan sampel yang digunakan dalam penelitian ini adalah cluster-random-sampling, dan sampelnya adalah kelas IV A. Soal tes, observasi, lembar wawancara, dan angket tentang keefektifan LKPD digunakan untuk mengumpulkan data. Hasil penelitian menunjukkan bahwa (1) terdapat perbedaan yang signifikan pengaruh penggunaan LKPD berbasis Discovery Learning terhadap peningkatan hasil belajar siswa dibandingkan dengan LKPD yang biasa digunakan di sekolah, dan (2) pembelajaran IPS dengan LKPD berbasis Discovery Learning efektif dalam meningkatkan hasil belajar siswa dari pada LKPD yang banyak digunakan di sekolah Penelitian ini menyimpulkan berdasarkan temuan penelitian yaitu : hasil penilaian kelayakan LKPD dan implementasi Lembar Kerja Peserta Didik (LKPD) IPS melalui pendekatan discovery learning. (LKPD) memperoleh skor rata-rata 4,56 dengan kategori layak. Sedangkan hasil uji keefektifan produk yang dilakukan oleh guru kelas IV terkait Lembar Kerja Peserta Didik (LKPD) IPS melalui pendekatan discovery learning berbasis cerita bergambar yaitu 80% dengan kategori efektif.
Abstrak- Kertas adalah sesuatu yang sering digunakan dalam kehidupan sehari-hari terdiri dari serat selulosa dan hemiselulosa yang terdapat di alam. Salah satu limbah yang dapat diolah menjadi bahan baku alternatif pembuatan kertas adalah sekam padi dan ampas tebu. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh komposisi sekam padi dan ampas tebu serta konsentrasi NaOH terhadap yield pulp yang dihasilkan. Kondisi operasi yang terbaik yang dihasilkan dari sekam padi dan serat ampas tebu oleh variasi konsentrasi NaOH juga diselidiki. Bahan baku kering dengan perbandingan liquor/crop 15:1 (mL/g) dicampur dengan NaOH (3-6% w/v) kemudian di digester dalam autoclave (120°C, 1 atm) selama 60 menit. Kondisi operasi dengan produksi yield terendah ketika dicampur antara serat ampas tebu dan serat sekam padi dengan perbandingan 1: 3, 1: 2 dan 1: 1. NaClO 5,25% (v / v) ditambahkan ke dalam campuran sebagai bleaching agent, kemudian proses selanjutnya ditekan dan dikeringkan sehingga dapat diproduksi menjadi kertas. Yield terkecil sekam padi dan ampas tebu pada konsentrasi NaOH 5% (w/v) adalah 42,28% dan 35,36%. Yield dan densitas terkecil ampas tebu dan sekam padi dengan perbandingan liquor/crop 1:2 adalah 42,28% dan 4,26 g/cm3. Kta kunci: kertas, chemical pulping, autoclave. Abstract- Generallay, the paper is made from fiber plants which contained cellulose fibers and hemicellulose usually exist in nature . One of waste that can be processed into paper-making raw material alternative is rice husk and bagasse. The purpose of this research was to know the influence of the composition of the rice husk and bagasse as well as NaOH concentration against pulp that yields produced. The operating conditions for the best produced of the rice husk’s and bagasse's fiber by variation of NaOH concentration were also investigated. Dry raw materials on liquor/crop ratio was 15:1 (mL/g) and mixed with 3 to 6% (w/v) NaOH then digested in an autoclave (120 0C; 1 atm) for 60 min. The operating condition which lowest yield production was mixed between the bagasse’s and rice husk’s fiber with ratio 1:3, 1:2 and 1:1. The NaClO 5.25% (v/v) was added into the mixture as bleaching agent, then pressed and dried as a paper. The lowest rice husk’s and bagasse’s fiber yield at 5% (w/v) NaOH concentration was obtained about 45.44% and 35.36%. The lowest yield and density at bagasse’s and rice husk’s fiber loading ratio 1:2 were obtained about 42.28% and 4.26 g/cm3.Keywords: paper, chemical pulping, autoclave.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.